PWS supplies unique hydrostatic pipe tester to Salzgitter Mannesmann
08.11.2013, 19:17
Salzgitter Mannesmann Line Pipe (SMLP) in Siegen, Germany, has taken a globally unique HTM (Hydro Testing Machine) from spiral pipe manufacturer PWS, Germany, into operation. With the testing strategy of the facility up to three pipes with different length can be tested simultaneously at three test stations in parallel with a total cycle time of 48 seconds (for 16 inches/12 meters) – more than 30 percent less than before.
The hydrotester supplied by PWS covers a diameter range from 4.5 to 16 inches with a wall thickness between 2.6 up to 16 millimeters. The length can vary from 9.7 to 18 meters. Simultaneous testing with different diameters and lengths is also possible. Each section can be controlled individually and independently. Maximum test pressure is 500 bar, with a tolerance of +/- 1 bar, for material grades X80 or N80 resp.
“The new facility is a marked improvement on the strategy for hydrotesting and pipe manufacture. Shorter pipe length in the manufacturing process no longer have to be separated for testing at a later time, thus ensuring a substantial advantage for production logistics and throughput. The technology package is rounded off by a very fast and highly precise pressure control system,“ says Michael Stark from PWS.
Thanks to the use of modern technology the up-to-date hydrotesting facility provides high flexibility and a high level of efficiency. Due to the automated plant and quick filling of the pipes SMLP achieves a significant reduction of the cycle time by 30 percent. The new hydrostatic press also meets future requirements with regard to safety, flexibility and productivity.
During setup and commissioning of the new equipment the ongoing production was not interrupted.
The facility has come on stream in the second quarter of 2013.
The new pipe plant is designed as three-strand hydrostatic pipe tester.
SMLP is able to test pipes of up to three different lengths at the same time.
At SMLP in Siegen, Germany, the hydrostatic pipe tester has
already been in normal operation for several months.
Based on SMS Group information
Other company news
- 19.07.2018 For its tandem cold mill, PAO Severstal again relies on the modernization expertise of SMS group
- 10.07.2018 Vizag Steel Plant successfully commissions new bloom & round combi-caster from SMS Concast
- 05.07.2018 exlabesa group commissions SMS group to supply two light-metal extrusion presses
- 14.06.2018 350,000 tons per year of galvanized steel strip for the Chinese construction and home appliances industries
- 14.06.2018 Yongfeng Group Ltd. invests in casting technology for the production of demanding SBQ steel grades
- 26.04.2018 Celsa Barcelona chooses direct oscillation drive from SMS Concast for the upgrade of their beam blank caster with a new strand
- 12.04.2018 TMK-ARTROM starts production on new heat treatment line for pipes supplied by SMS group
- 12.04.2018 Constellium expands aluminum casthouse capacity in Dĕčín, Czech Republic, with Hertwich Engineering homogenizing furnace
- 29.03.2018 Maanshan Iron and Steel orders heavy section mill from SMS group
- 26.03.2018 MMK to implement comprehensive revamp of hot strip mill 2500 with SMS group


