Journals →  Gornyi Zhurnal →  2015 →  #12 →  Back

EQUIPMENT AND MATERIALS
ArticleName Assessment of efficiency of mining machines with cutting parts equipped with disk tools
DOI 10.17580/gzh.2015.12.14
ArticleAuthor Klishin V. I., Gerike B. L., Gerike P. B.
ArticleAuthorData

Institute of Coal, Federal Research Center for Coal and Coal Chemistry, Siberian Branch, Russian Academy of Sciences, Kemerovo, Russia:

V. I. Klishin, Head of a Laboratory, Professor, Doctor of Engineering Sciences, Corresponding Member of the Russian Academy of Sciences
B. L. Gerike, Principal Researcher, Professor, Doctor of Engineering Sciences, gbl_42@mail.ru
P. B. Gerike, Senior Researcher, Assistant Professor, Candidate of Engineering Sciences

Abstract

The article describes R&D aimed to improve and make more efficient non-explosive destruction of different rock types using mining machines equipped with shearing–cutting tools. Based on the analysis of the existing methods and criteria for estimating quality of a cutting tool and its interaction with a medium to be cut, it is proposed to introduce a new index of a work tool efficacy to allow quantitative evaluation of rock resistance to mechanical impact, prediction of energy consumption of rock fragmentation and, consequently, productivity of mining machine under specific operating conditions. The authors substantiate and present analytical expressions of this index, graphs of the index behavior versus rock viscosity and hardness and real energy consumption, as well as the data of modeling of mining machine cutting–shearing tool performance. The article gives recommendations on equipping mining machines (cutter–shearers) with the tool designed so that to fit with the properties of cut rocks. The successful industrial tests have shown consistency with the modeling and theoretical research data in terms of energy consumption and productivity of non-explosive destruction of various type rocks.
The study was carried out under financial support from the RF Ministry of Education and Science within the framework of the federal targeted program on R&D in Priority Areas of Advancement of the Russian Science and Technology for 2014–2020, under the topic of Experimental Design Engineering of Combination Tool Using Superhard Composites for Efficient Destruction of Rocks. Agreement No. 14.607.21.0028 as of June 5, 2014. Unique Project Identifier RFMEFI60714X0028.

 

keywords Non-explosion mining, lithotypes, mining machines, work tool, cutting, shearing, energy consumption, productivity, tool efficacy index, modeling, industrial approval
References

1. Baron L. I., Glatman L. B. K vyboru kriteriya otsenki soprotivlyaemosti gornykh porod razrusheniyu sharoshechnym instrumentom (To the choice of criteria of assessment of rock resistance to the destruction by rolling tool). Razrushenie gornykh porod sharoshechnym instrumentom (Destruction of rocks by rolling tool). Moscow : Nauka, 1966. pp. 18–27.
2. Pozin E. Z. Soprotivlyaemost ugley razrusheniyu rezhushchimi instrumentami (Resistance of coals to the destruction by cutting tools). Moscow : Nauka, 1972. 238 p.
3. Tangaev I. A. Energoemkost protsessa dobychi i pererabotki poleznykh iskopaemykh (Power intensity of the process of mining and processing of minerals). Moscow : Nedra, 1986. 274 p.
4. Shreyner L. A. Tverdost khrupkikh tel (Solidity of fragile bodies). Moscow : Gostoptekhizdat, 1949. 187 p.
5. Khoreshok A. A., Tsekhin A. M., Borisov A. Yu. Vliyanie usloviy ekspluatatsii gornykh kombaynov na konstruktsiyu ikh ispolnitelnykh organov (Influence of conditions of exploitation of mining combines on construction of their operating parts). Gornoe oborudovanie i elektromekhanika = Mining Equipment and Electromechanics. 2012. No. 6. pp. 2-5.

6. Khoreshok A. A., Mametev L. E., Tsekhin A. M. et al. Proizvodstvo i ekspluatatsiya razrushayushchego instrumenta gornykh mashin (Production and exploitation of cutting tool of mining machines). Tomsk: Publishing House of Tomsk Polytechnic University, 2013. 296 p.
7. Prokopenko S. A., Shlapakov P. A. Povyshenie bezopasnosti i effektivnosti otboyki gornoy massy v shakhtakh (Increasing of safety and efficiency of crushing of rock mass in mines). Vestnik Nauchnogo tsentra po bezopasnosti rabot v ugolnoy promyshlennosti = Vestnik of Safety in Coal Mining Scientific Center. 2015. No. 2. pp. 27–31.
8. Loui J. P., Karanam U. M. R. Numerical studies on chip formation in drag-pick cutting of rocks. Geotechnical and Geological Engineering. 2012. Vol. 30, No. 1. pp. 145–161.
9. Razrushenie ugley i gornykh porod (Crushing of coals and rocks). Under the editorship of A. M. Terpigorev and M. M. Protodyakonov. Moscow : Ugletekhizdat, 1958. 58 p.
10. Gerike B. L., Lizunkin V. M. Energeticheskaya otsenka kachestva mekhanicheskogo razrusheniya gornykh porod (Energetic assessment of mechanic rock destruction quality). Gornyi Zhurnal = Mining Journal. 1998. No. 6. pp. 51–55.
11. Konyashin Yu. G. O vliyanii svoystv gornykh porod na energoemkost udarnogo skalyvaniya mezhshchelevykh tselikov (About the influence of the properties of rocks on power intensity of bump cleavage of mechanical pillars). Razrushenie gornykh porod : nauchnoe soobshchestvo (Destruction of rocks : scientific community). Moscow : Skochinsky Institute of Mining, 1973. Iss. 106. pp. 24–30.
12. Ericssson A. Adams modelling of contact forces between disc cutter and mount. Department of Applied Mechanics. Division of Dynamics. Chalmers University of Technology. Master’s Thesis. Göteborg, Sweden, 2010. 56 p.
13. Su O., Akcin N. A. Numerical simulation of rock cutting using the discrete element method. International Journal of Rock Mechanics and Mining Sciences. 2011. Vol. 48, No. 3. pp. 434–442.
14. Krestovozdvizhenskiy P. D. Povyshenie prochnosti tangentsialnykh povorotnykh reztsov gornykh ochistnykh kombaynov : dissertatsiya ... kandidata tekhnicheskikh nauk (Increasing of durability of circumferential indexable inserts of mining cutter-loaders : Dissertation … of Candidate of Engineering Sciences). Novokuznetsk, 2011. 190 p.
15. Baron L. I., Glatman L. B., Kozlov Yu. N., Melnikov I. I. Razrushenie gornykh porod prokhodcheskimi kombaynami (Destruction of rocks by continuous combines). Razrushenie agregirovannymi instrumentami (Destruction by aggregated instruments). Moscow : Nauka, 1977. 160 p.
16. Kuidong G., Changlong D., Hongxiang J., Songyong L. A theoretical model for predicting the Peak Cutting Force of conical picks. Frattura ed Integrita Strutturale. 2014. Vol. 8, No. 27. pp. 43–52.
17. Klishin V. I., Nikitenko S. M., Gerike B. L., Krestovozdvizhenskiy P. D. Novye armiruyushchie vstavki dlya povorotnykh tangentsialnykh reztsov (New reinforcing elements for tangential rotary cutters). Gornyi Zhurnal = Mining Journal. 2014. No. 12. pp. 89–92.
18. Lizunkin V. M., Volkov E. S., Kravtsov V. M. et al. Ispytaniya kombaynovogo sposoba vyemki rud (Testings of combine method of ore excavation). Gornyi Zhurnal = Mining Journal. 1989. No. 2. pp. 36–38.
19. Lizunkin V. M., Krylov E. I., Gerike B. L., Lizunkin M. V. Ispolnitelnyy organ gornogo kombayna (Actuating mechanism of mining machine). Patent RF, No. 2187640, E21C25/16, 20.08.2002. Applied: January 29, 2001. Published: August 20, 2002.
20. Kudlay E. D., Privolotskiy A. A. Issledovanie kharakteristik raboty ispolnitelnykh mekhanizmov ochistnogo kombayna (Investigation of characteristics of operation of actuating mechanisms of cutter-loaders). Sovershenstvovanie tekhniki i tekhnologii razrabotki mnogoletnemerzlykh rossypey : sbornik nauchnykh trudov (Improvement of technics and technology of development of permafrost placers : collection of scientific proceedings). Magadan, 1985. pp. 15–19.

Language of full-text russian
Full content Buy
Back