Journals →  Tsvetnye Metally →  2026 →  #4

Tsvetnye Metally



BENEFICIATION
ArticleName The effect of pH and the long-chain collector concentration on the selectivity of the extraction of useful component by gamma flotation
ArticleAuthor Kondratiev S. А.
ArticleAuthorData

N. A. Chinakal Institute of Mining, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia

S. А. Kondratiev, Head of the Laboratory of Mineral Processing and Technological Ecology, Doctor of Technical Sciences, e-mail: kondr@misd.ru

ArticleName Combined technology of zeolite sample beneficiation
ArticleAuthors Kurbaniyazov S. K., Normurodov А. А., Zhumagaziev A. Z., Khamidullaev B. N., Mamadiyarov M. D.
ArticleAuthorsData

Qoja Ahmet Yassawi International Kazakh-Turkish University, Turkistan, Kazakhstan

S. K. Kurbaniyazov, Head of the Department of Science, Candidate of Geological and Mineralogical Sciences

 

Institute of Mineral Resources, Tashkent, Republic of Uzbekistan

А. А. Normurodov, Head of the Laboratory, PhD, e-mail: azizbek19922304@mail.ru
B. N. Khamidullaev, Head of the Сenter, Senior Researcher, PhD

 

Atyrau University named after Khalel Dosmukhamedov, Atyrau, Kazakhstan

A. Z. Zhumagaziev, Senior Lecturer of the Department

 

Peoples’ Friendship University named after Academician A.Kuatbekov, Shymkent, Republic of Kazakhstan

M. D. Mamadiyarov, Head of the Department of Science, Candidate of Geographical Sciences, Associate Professor

KOLA MINING AND METALLURGICAL COMPANY: ON THE WAY OF SUSTAINABLE DEVELOPMENT
ArticleName Test results of white matte magnetic separation in the cycle of grinding and flotation purification of the resulting metal phase using pneumatic reactor-separator flotation machines
ArticleAuthors Ivanov А. V., Dubrovsky V. L., Lebedok А. V., Klemyatov А. А.
ArticleAuthorsData

PJSC Uralmashplant, Yekaterinburg, Russia

А. V. Ivanov, Engineer-Technologist, Directorate of Design Developments, e-mail: ivanovAntV@outlook.com

 

JSC Kola MMC, Monchegorsk, Russia

V. L. Dubrovsky, Chief Specialist of the Scientific and Technical Development Department, e-mail: DubrovskiyVL@kolagmk.ru

 

LLC HAZEMAG ALLMINERAL, Shchyolkovo, Russia

А. V. Lebedok, General Director, e-mail: lebedok@allmineral.ru


JSC NIUIF, Saint-Petersburg, Russia

А. А. Klemyatov, Chief Specialist of the Complex Department, e-mail: AKlemyatov@phosagro.ru

LIGHT METALS, CARBON MATERIALS
ArticleName Study of the effect of waterproofing additives on the performance characteristics of aluminosilicate refractories for foundry tooling
ArticleAuthors Kuzmina M. Yu., Kuzmin M. P.
ArticleAuthorsData

Irkutsk National Research Technical University, Irkutsk, Russia

M. Yu. Kuzmina, Associate Professor, Associate Professor at the Department of Non-Ferrous Metallurgy, Candidate of Chemical Sciences, e-mail: kuzmina.my@yandex.ru
M. P. Kuzmin, Associate Professor, Associate Professor at the Department of Non-Ferrous Metallurgy, Candidate of Technical Sciences, e-mail: mike12008@yandex.ru

COMPOSITES AND MULTIPURPOSE COATINGS
ArticleName Study of the conditions for obtaining a metal-filled composite material based on graphite by the electrochemical method and the properties of the obtained products. Part 2
ArticleAuthors Kidalov N. A., Miroshkin N. Yu., Belov A. A., Polyak S. R.
ArticleAuthorsData

Volgograd State Technical University, Volgograd, Russia

N. A. Kidalov, Head of the Department of Machinery and Foundry Technology, Doctor of Technical Sciences
N. Yu. Miroshkin, Head of the Laboratory of the Department of Machinery and Foundry Technology, Candidate of Technical Sciences, e-mail: nikolays34rus@gmail.com
A. A. Belov, Candidate of Technical Sciences, Associate Professor of the Department of Machinery and Foundry Technology
S. R. Polyak, Postgraduate Student of the Department of Machinery and Foundry Technology

MATERIALS SCIENCE
ArticleName Chemical composition, microstructure and mechanical properties of alloys used for the manufacture of chromel alumel thermocouple
ArticleAuthors Asadullin М. R., Gubaidullin А. N., Kuryntsev S. V., Eksuzyan R. B.
ArticleAuthorsData

OJSC Kazan Plant Electropribor, Kazan, Republic of Tatarstan, Russia

М. R. Asadullin, Chief Steel Worker
А. N. Gubaidullin, Engineer of RC

 

Kazan National Research Technical University named after A.N. Tupolev - KAI, Kazan, Republic of Tatarstan, Russia
S. V. Kuryntsev, Associate Professor, Candidate of Economic Sciences, e-mail: kuryntsev16@mail.ru
R. B. Eksuzyan, Master’s Student

ArticleName Studying the properties of promising highly heat-conductive cast alloys Al – 3% (wt.) Zn – 3 % (wt.) Ca – X (X = Si, Mg, Ni, Zr, Sc)
ArticleAuthors Lyskovich А. А., Bazhenov V. Е., Baranov I. I., Кoltygin А. V.
ArticleAuthorsData

National University of Science and Technology MISIS, Moscow, Russia

А. А. Lyskovich, Postgraduate Student of the Department of Casting and Material Working, e-mail: lyskovich.aa@misis.ru
V. Е. Bazhenov, Associate Professor of the Department of Casting and Material Working, Candidate of Technical Sciences, e-mail: v.e.bagenov@gmail.com
I. I. Baranov, Postgraduate Student of the Department of Casting and Material Working, e-mail: baranov.ii@misis.ru
А. V. Кoltygin, Head of the Department of Casting and Material Working, Doctor of Technical Sciences, e-mail: misistlp@mail.ru

ArticleName Studying the deformation resistance of the platinum-rhodium PLRD80-20 alloy
ArticleAuthors Salikhianov D. R., Pervukhin А. Е.
ArticleAuthorsData

E. S. Gorkunov Institute of Mechanical Engineering, Ural Branch of the Russian Academy of Sciences, Yekaterinburg, Russia1 ; Institute of New Materials and Technologies, Ural Federal University named after B. N. Yeltsin, the first president of Russia, Yekaterinburg, Russia2

D. R. Salikhianov, Researcher1,2, Associate Professor, Candidate of Technical Sciences, e-mail: salenhall@gmail.com

 

JSC Yekaterinburg Non-Ferrous Metals Processing Plant, Yekaterinburg, Russia

А. Е. Pervukhin, Chief Specialist in Drawing and Heat Treatment, Candidate of Technical Sciences, e-mail: a.pervuhin@ezocm.ru

ArticleName Influence of mechanical alloying and subsequent hot pressing on the microstructure and properties of the Al – Ti alloy
ArticleAuthors Mochugovsky А. G., Troshkova О., Тabachkova N. Yu., Zanaeva E. N., Prosviryakov А. S., Mikhailovskaya А. V.
ArticleAuthorsData

National University of Science and Technology MISIS, Moscow, Russia

А. G. Mochugovsky, Associate Professor, Candidate of Technical Sciences, e-mail: mochugovskiy.ag@misis.ru
О. Troshkova, Laboratory Researcher
N. Yu. Тabachkova, Associate Professor, Candidate of Physical and Mathematical Sciences
E. N. Zanaeva, Associate Professor, Candidate of Technical Sciences
А. S. Prosviryakov, Senior Researcher, Candidate of Technical Sciences
А. V. Mikhailovskaya, Associate Professor, Candidate of Technical Sciences

METAL PROCESSING
ArticleName Аssessment of residual deformations in aluminum parts
ArticleAuthors Kargapoltsev S. K., Bolshakov R. S., Mozalevskaya A. K.
ArticleAuthorsData

Irkutsk National Research Technical University, Irkutsk, Russia
S. K. Kargapoltsev, Professor of the Department of Technology and Equipment of Machine-building Industries, Doctor of Technical Sciences, e-mail: kck6262@mail.ru

 

Irkutsk State Transport University, Irkutsk, Russia
R. S. Bolshakov, Associate Professor of the Department of Operational Work Management, Candidate of Technical Sciences, e-mail: bolshakov_rs@mail.ru
A. K. Mozalevskaya, Senior Lecturer at the Department of Railway, Bridge and Tunnel Construction

Journals →  Tsvetnye Metally →  2026 →  #4