Journals →  Tsvetnye Metally →  2017 →  #6 →  Back

MATERIALS SCIENCE
ArticleName Prospective ways of development of directional solidification techniques for turbine blades manufacturing. Part 2
DOI 10.17580/tsm.2017.06.13
ArticleAuthor Iakovlev E. I.
ArticleAuthorData

All-Russian Institute of Aviation Materials, Moscow, Russia:

E. I. Iakovlev, Leading Engineer, e-mail: y-e-i@yandex.ru

Abstract

Firstly we carried out the analysis of the qualitative conditions of structure formation in the casting of turbine blades by directional solidification, showing the peculiarities of existing technologies. We also considered the promising areas of turbine blades' directional solidification development techniques. All-Russian Institute of Aviation Materials offered an “alternative mold”, which is a water-cooled container with sliding heat shields over it. The unit is filled with inert gas under pressure of 30–150 mm Hg. The directional solidification techniques start by moving the mold with the melt from the heating zone to the cooling zone through the heat shield. As the thermophysical analysis on the cooling intensity of this process is slightly superior to the Bridgman-Stockbarger method, however, tight-fitting shape of the heat shield allows you to increase the value of the longitudinal component of the temperature gradient vector and the crystallization rate, which improves the quality of castings. A set of jet nozzle spacers with macrostructure high yield was produced by this method. Further development of directional solidification techniques is possible by intensive convective cooling of forms with an inert gas in vacuum. The process of directional solidification gas-cooled castings (Gas Cooling Casting — GCC) was first patented in 1996 by the famous “Howmet” (now “Alcoa Howmet”) for casting of large-size blades and single crystal and aimed structures for aviation and power turbines. The author of this article, along with the specialists of JSC “NPO “Saturn” developed a technique of directional solidification with argon cooling forms (PGO) for the casting of large gas turbine blades. For this purpose, existing unit for the directional solidification Bridgman-Stockbarger method was upgraded and provides more intensive cooling of forms (convection of argon stream blower forms). The new process allows to increase the number of blades in the block and feeding speed, which leads to increased productivity in 1.8–2.0 times and the suppression of structural defects compared to the Bridgman-Stockbarger method.

keywords Directional solidification techniques, Bridgman-Stockbarger method, liquid metal cooling turbine blades, heat transfer coefficient, single crystal and directional structure
References

1. Kablov E. N. Production of turbine blades of gas-turbine engines by directional solidification. Gazoturbinnye tekhnologii. 2000. No. 3. pp. 10–13.
2. Kablov E. N., Gerasimov V. V., Shalimov A. S. et al. Vacuum casting equipment for high-velocity directional solidification. Liteynoe proizvodstvo. 1995. No. 10. pp. 30–32.
3. Tolorayya V. N., Orekhov N. G., Kablov E. N. Advanced Method for Single Crystal Casting of Turbine Blades for Gas Turbine Engines and Plants. Metallovedenie i termicheskaya obrabotka metallov. 2002. No. 7. pp. 11–15.
4. Miller J., Pollock T. Development and application of an optimization protocol for directional solidification: integrating fundamental theory, experimentation and modeling tools. Supperalloys 2012. TMS (The Minerals, metals and materials society). 2012. pp. 653–662.
5. Reed R., Mover Jare, Sato A., Karlsson F., Hasselqvist M. A new single crystal superalloy for power generation applications. Supperalloys 2012. Proceedings of the 12th International Symposium of Superalloys. Hoboken : Wiley, 2012. pp. 197–204.
6. Kablov E. N., Gerasimov V. V., Visik E. M., Demonis I. M. Role of the directed solidification in the resource-saving production technologies of details of GTD. Trudy VIAM. 2013. No. 3.
7. Kablov E. N., Tolorayya V. N. VIAM — Founder of Domestic Technology for Casting Single-Crystal Turbine Blades of GTE and GTS. Aviatsionnye materialy i tekhnologii. 2012. No. S. pp. 105–117.
8. Stroganov G. B., Logunov A. V., Kats E. L., Gerasimov V. V. et al. High velocity directional solidification of heat-resistant alloys. Liteynoe proizvodstvo. 1983. No. 12. pp. 20–22.
9. Gerasimov V. V., Visik E. M., Kolyadov E. V. Development of technology of large-size castings blades with single-crystal structure. Liteynoe proizvodstvo. 2014. No. 3. pp. 29–32.
10. Kats E. L., Konter M., Roesler J., Lubenets V. P. Process for casting a directionally solidified article and apparatus for carrying out this process. Patent 0749790 EP. Filled: 20.06.95. Published: 26.10.1995.
11. Kats E. L., Konter M., Roesler J., Lubenets V. P. Process for producing a directionally solidified casting and apparatus for carrying out this process. Patent 5921310 US. Filled: 26.09.1997. Published: 13.07.99.
12. Brinegar J. R. Method and apparatus for directional solidification of a metal melt. Patent 1375034 EP. Filled: 03.06.03. Published: 02.01.2004.
13. Balliel M., Eckardt D., Konter M., Weiland A. Method for casting a directionaly solidified article. Patent 1531020 EP. Filled: 06.11.03 ; 18.08.
14. Bouse G. K., Schaeffer J. C., Henry M. F. Optimizing SC rene N4 alloy for DS AFT-stage bucket applications for industrial gas turbine. Supperalloys 2008. Proceedings of the 11th International Symposium of Superalloys. 2008. pp. 99–108.
15. Kats E. L., Skorobogatykh V. N., Lubenets V. P., Yakovlev E. I. Processes of oriented crystallization for large-dimensional blades of gas turbines. Tekhnologiya metallov. 2015. No. 3. pp. 22–28.
16. Kats E. L., Lubenets V. P., Skorobogatykh V. N., Kuznetsov K. Yu., Yakovlev E. I., Vinogradov A. I., Berestevich A. I., Kopin P. A., Zhabrev S. B. Method of casting of gas turbine blades with directed and monocrystalline structure. Patent RF, No. 2536853. Applied: 11.06.2013. Published: 20.10.2014.
17. B. Chalmers. Solidification theory. Translated from English. Moscow : Metallurgiya, 1968. 288 p.
18. Ospennikova O. G. Development Strategics of High-Temperature Alloys and Special Steels, Protective and Thermoprotective Coatings. Aviatsionnye materialy i tekhnologii. 2012. No. S. pp. 19–36.
19. Nazarkin R. M., Kolodochkina V. G., Ospennikova O. G., Orlov M. R. The irreversible structural modifications of single crystals fine structure of Ni-based superalloys at enduring operation of turbine blades. Trudy VIAM. 2015. No. 12. p. 03. DOI: 10.18577/2307-6046-2015-0-12-3-3
20. Rowe A., Wells J., West G., Thomson R. Microstructural evolution of single crystal and directionally solidified rejuvenated nickel superalloys. Supperalloys 2012. Proceedings of the 12th International Symposium of Superalloys. Hoboken : Wiley, 2012. pp. 245–254.
21. Giraud R., Cormier J., Hervier Z., Bertheau D., Harris K., Wahl J., Mühet X., Mendez J., Organista A. Effect of the prior microstructure degradation on the high temperature/Low stress non-isothermal creep behavior of CMSX-4® Ni-based single crystal superalloy. Proceedings of the 12th International Symposium of Superalloys. Hoboken : Wiley, 2012. pp. 265–274.

Language of full-text russian
Full content Buy
Back