Journals →  Tsvetnye Metally →  2017 →  #6

Tsvetnye Metally


The 6th issue of the journal “Tsvetnye Metally” (Non-ferrous metals) (June 2017) shares the issues of theory and practice of ore dressing, complex use of crude ore, production and processing of non-ferrous metals, materials science, etc.


The “Benefication” item is devoted to the 20th anniversary of the Gold Mining Company UGC: the results of improvement of gold-bearing ore processing technologies at the company’s dressing plants are shown.


The item “Noble metals and alloys” conveys the results of pilot testings regarding the technology for processing of Ag-Pb-Zn accumulators in order to obtain silver. The process flowsheet is described and is ready for implementation.


The article by G. D. Apalkova (item “Light metals and carbon materials”) tells about the rammability of aluminum electrolyzer's carbon pastes.


Authors from the I. V. Tananaev Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials researched the solution, obtained during the nitric-acid decomposition of perovskite concentrate. The conclusion was that, together with titanium magnetite and sphene, perovskite belongs to non-traditional titanium raw materials and, fulfilling all the requirements of its complex processing, it makes it possible to obtain products that contain not only Ti, but also Ta, Nb and rare-earth metals.


The article by M. L. Kotsar, V. N. Kaplenkov and Z. M. Alekberov presents an analysis of possible reasons for cracking of titanium alloy products, belonging to the heat-exchange equipment of nuclear energetic tools. Such cracking usually happens as a result of hydration.


You may find below more details about the issue or book printed or electronic version of the journal.

ArticleName Intensification of pulp separation in beryllium production
ArticleAuthors Tolkachev V. A., Paskhin N. P., Maynikov D. V.

All-Russian Research Institute of Chemical Technology, Moscow, Russia:
V. A. Tolkachev, Leading Researcher
N. P. Paskhin, Senior Researcher
D. V. Maynikov, Senior Researcher, e-mail:

ArticleName Operating results of the flotation machines CFM in the industrial schemes of dressing of copper, copper-zinc and lead-zinc ores
ArticleAuthors Viduetskiy M. G., Maltsev V. A., Panshin A. M., Yochev I.

TPC “Project institute”, Ural Federal University, Ekaterinburg, Russia:
M. G. Viduetskiy, Principal Director of Scientific Research, e-mail:
V. A. Maltsev, Director


LLC “UMMC-Holding”, Verkhnyaya Pyshma, Russia:
A. M. Panshin, Technical Director


“Rudmetal” AD, Rudozem, Bulgaria:
I. Yochev, Chief Mechanic

ArticleName Heap biooxidation of the off-balance gold-sulfide and polymetallic ores and final tailings
ArticleAuthors Seleznev A. N., Epiforov A. V., Emelyanov Yu. E., Balikov S. V.

Irkutsk Research Institute of Precious and Reare metals and Diamonds, Irkutsk, Russia:
A. N. Seleznev, Junior Researcher, e-mail:
A. V. Epiforov, Senior Researcher, e-mail:
Yu. E. Emelyanov, Leading Researcher
S. V. Balikov, Chief Researcher

ArticleName Improvement of processing technologies for gold-bearing ores at the concentrators of the gold mining company UGC
ArticleAuthors Strukov K. I., Plotnikov S. N., Nikolaev Yu. L., Patskevich P. G.

Gold mining company UGC, Chelyabinsk, Russia:

K. I. Strukov, President
S. N. Plotnikov, Chief Dresser, e-mail:


JSC “Irgiredmet”, Irkutsk, Russia:
Yu. L. Nikolaev, Senior Researcher of the Laboratory of Metallurgy


Research Institute of Comprehensive Exploitation of Mineral Resources (IPKON) RAS, Moscow, Russia:
P. G. Patskevich, Senior Researcher

ArticleName The choice of methods of gold-arsenic ores processing (Novotroitsk deposit) taking into account their technological peculiarities
ArticleAuthors Strukov K. I., Plotnikov S. N., Zyryanova L. A., Nikolaev Yu. L.

Gold mining company UGC, Chelyabinsk, Russia:

K. I. Strukov, President
S. N. Plotnikov, Chief Dresser, e-mail:
L. A. Zyryanova, Deputy Head of Assay Laboratory


JSC “Irgiredmet”, Irkutsk, Russia:
Yu. L. Nikolaev, Senior Researcher of the Laboratory of Metallurgy

ArticleName Analysis of one of the shaft furnace modernization ways
ArticleAuthor Korol Yu. A.

Yu. A. Korol, Metallurgical Engineer, Ekaterinburg, Russia, e-mail:

ArticleName Factory testings of silver obtaining from silver-lead-zinc accumulators by two-stage smelting
ArticleAuthors Rogov S. I., Boboev I. R., Atmadzhidi A. S., Ryabova A. V.

Shchyolkovo Plant of Secondary Precious Metals, Shchyolkovo, Russia:

S. I. Rogov, Director of Economic Affairs


National University of Science and Technology “MISiS”, Moscow, Russia:
I. R. Boboev, Assistant Professor of a Chair of Non-Ferrous Metals and Gold, e-mail:
A. V. Ryabova, Post-Graduate Student of a Chair of Non-Ferrous Metals and Gold

A. A. Baikov Institute of Metallurgy, Moscow, Russia:

A. S. Atmadzhidi, Post-Graduate Student

ArticleName Assessment of effect of coagulation and sedimentation of dust particles on operation stability of aluminium electrolyzer burners
ArticleAuthors Shakhray S. G., Dekterev A. A., Skuratov A. P., Klimovich L. V.

Siberian Federal University, Krasnoyarsk, Russia:

S. G. Shakhray, Assistant Professor, Chair of Technosphere Safety of Mining and Metallurgical Production, e-mail:
A. A. Dekterev, Assistant Professor
A. P. Skuratov, Professor
L. V. Klimovich, Senior Lecturer

ArticleName Rammability of aluminum electrolyzer's carbon pastes
ArticleAuthor Apalkova G. D.

South Ural State University, Chelyabinsk, Russia:

G. D. Apalkova, Professor, e-mail:

ArticleName Release of iron-thorium cake from technological solutions after nitric acid opening of perovskite concentrate
ArticleAuthors Mudruk N. V., Korovina Yu. V., Elizarova I. R., Nikolaev A. I.

I. V. Tananaev Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials (Kola Science Center RAS), Apatity, Russia:

N. V. Mudruk, Junior Researcher, e-mail:
Yu. V. Korovina, Engineer
I. R. Elizarova, Senior Researcher
A. I. Nikolaev, Deputy Director, Head of Laboratory of Chemistry and Technology of Raw Materials of Refractory Rare Metals

ArticleName Processing of rhenium-bearing molybdenite concentrates. Part 2. Catching and extraction of rhenium from sublimates
ArticleAuthors Sitdikov F. G., Galkova L. I., Pikulin K. V., Selivanov E. N.

JSC Industrial and Creative Enterprise “Rezonans”, Ekaterinburg, Russia:

F. G. Sitdikov, Chief Executive Officer
L. I. Galkova, Industrial Engineer


Institute of Metallurgy of Ural Branch of RAS, Ekaterinburg, Russia:
K. V. Pikulin, Investigator Apprentice, Post-Graduate Student, e-mail:
E. N. Selivanov, Head of Laboratory

ArticleName Investigation of wetting and spreading of aluminium on titanium during the formation of aluminium – titanium foam composite materials
ArticleAuthors Kovtunov A. I., Khokhlov Yu. Yu., Myamin S. V.

Togliatti State University, Togliatti, Russia:

A. I. Kovtunov, Professor, e-mail:
Yu. Yu. Khokhlov, Engineer, e-mail:
S. V. Myamin, Engineer, e-mail:

ArticleName Prospective ways of development of directional solidification techniques for turbine blades manufacturing. Part 2
ArticleAuthor Iakovlev E. I.

All-Russian Institute of Aviation Materials, Moscow, Russia:

E. I. Iakovlev, Leading Engineer, e-mail:

ArticleName Obtaining the high-pure titanium based alloys. Investigation of their composition and properties
ArticleAuthors Kotsar M. L., Kaplenkov V. N., Alekberov Z. M.

Leading scientific-investigation institute of chemical technology (VNIIKhT), Moscow, Russia:

M. L. Kotsar, Head of Laboratory, e-mail:
V. N. Kaplenkov, Leading Researcher
Z. M. Alekberov, Leading Engineer

ArticleName Theoretical and experimental investigations of copper plates dressing and rolling
ArticleAuthors Maksimov E. A., Shatalov R. L.

JSC “Intray”, Chelyabinsk, Russia:

E. A. Maksimov, Head of Technical Branch, e-mail:


Moscow Polytechnical University, Moscow, Russia:

R. L. Shatalov, Professor, e-mail:

Journals →  Tsvetnye Metally →  2017 →  #6