Journals →  Tsvetnye Metally →  2021 →  #8

Tsvetnye Metally



BENEFICIATION
ArticleName Pilot tests of gravity-flotation technology for processing industrial waste from alluvial gold mining
ArticleAuthors Evdokimov S. I., Gerasimenko T. E.
ArticleAuthorsData

North Caucasian Mining and Metallurgical Institute (State Technological University), Vladikavkaz, Republic of North Ossetia-Alania:

S. I. Evdokimov, Associate Professor, Chair of mining, Candidate of Technical Sciences, e-mail: eva-ser@mail.ru
T. E. Gerasimenko, Head of the Intellectual Property Chair, Candidate of Technical Sciences, e-mail: gerasimenko_74@mail.ru

ArticleName Study of the use of polyvinylcaprolactam in the reagent mode of gold flotation
ArticleAuthors Matveeva T. N., Getman V. V., Karkeshkina A. Yu.
ArticleAuthorsData

Research Institute of Comprehensive Exploitation of Mineral Resources named after Academician N. V. Melnikov RAS, Moscow, Russia:

T. N. Matveeva, Deputy Director for Research, Doctor of Technical Sciences
V. V. Getman, Senior Scientific Researcher, Candidate of Technical Sciences, e-mail: viktoriki.v@gmail.com
A. Yu. Karkeshkina, Research Scientist

ArticleName Influence of granulometric composition and characteristics of filtration fabric on dehydration of difficult-to-filter concentrates
ArticleAuthors Chylbak-ool E. D., Kruglov A. V., Dmitrakova U. V., Yushina T. I.
ArticleAuthorsData

STC Bakor Ltd., Moscow, Russia:

E. D. Chylbak-ool, Engineer, e-mail: chylbak-ool@ntcbakor.ru
A.V. Kruglov, Head of the Research Center for Innovative Solutions for Dewatering and Benefication, e-mail: kruglov@ntcbakor.ru
U. V. Dmitrakova, Researcher, e-mail: dmitrakova@ntcbakor.ru

 

National University of Science and Technology “MISiS”, Moscow, Russia:
T. I. Yushina, Head of the Chair for Benefication and Processing of Mineral Resources and Technogenic Raw Materials, Candidate of Technical Sciences, Associate Professor, e-mail: yuti62@mail.ru

HEAVY NON-FERROUS METALS
ArticleName Thermodynamics of Claus conversion of reduced sulfur dioxide
ArticleAuthors Platonov O. I., Tsemekhman L. Sh.
ArticleAuthorsData

O. I. Platonov, Independent Consultant, Candidate of Technical Sciences, e-mail: oilpa@yandex.ru
L. Sh. Tsemekhman, Member of the Editorial Board of the Tsvetnye Metally Journal, Doctor of Technical Sciences, Professor, e-mail: lev.tsem1@gmail.com

ArticleName Use of thermochemistry methods when processing oxidized nickel ores
ArticleAuthors Kolmachikhina O. B., Lobanov V. G., Polygalov S. E., Makovskaya O. Yu.
ArticleAuthorsData

Ural Federal University named after the First President of Russia B. N. Yeltsin, Yekaterinburg, Russia:

O. B. Kolmachikhina, Associate Professor, Сandidate of Technical Sciences, e-mail: o.b.kolmachikhina@urfu.ru
V. G. Lobanov, Associate Professor, Сandidate of Technical Sciences, e-mail: v.g.lobanov@urfu.ru
S. E. Polygalov, Assistant Lecturer, e-mail: sergey.polygalov@urfu.ru
O. Yu. Makovskaya, Associate Professor, Сandidate of Technical Sciences, e-mail: o.i.makovskaia@urfu.ru

RADIOACTIVE ELEMENTS
ArticleName Thermochemical treatment of a cladding fuel simulator based on UO2 with an oxidizing mixture NxOy + O2 + CO2 + H2O(steam)
ArticleAuthors Aksyutin P. V., Dyachenko A. S., Zhabin A. Yu., Zherin I. I.
ArticleAuthorsData

FSUE Mining and Chemical Combine, Zheleznogorsk, Russia:

P. V. Aksyutin, Radiochemist Engineer, e-mail: atomlink@mcc.krasnoyarsk.su
A. S. Dyachenko, Leading Engineer
A. Yu. Zhabin, Head of Laboratory

 

National Research Tomsk Polytechnic University, Tomsk, Russia:
I. I. Zherin, Professor, Doctor of Chemistry

MATERIALS SCIENCE
ArticleName Increasing the efficiency of modifying ingots made of aluminum alloy AK7 by alternately acting running and rotating magnetic fields
ArticleAuthors Khripchenko S. Yu., Dolgikh V. M.
ArticleAuthorsData

Institute of Continuous Media Mechanics, Ural Branch of the Russian Academy of Sciences, Perm, Russia:

S. Yu. Khripchenko, Leading Researcher, Doctor of Technical Sciences, professor, e-mail: khripch@icmm.ru
V. M. Dolgikh, Senior Researcher, Candidate of Technical Sciences

ArticleName The effect of forced cooling during friction stir welding on the structure and properties of 1565ChN116 aluminium alloy joints
ArticleAuthors Drits A. M., Ovchinnikov V. V., Solovieva I. V., Bakshaev V. A.
ArticleAuthorsData

ARKONIK SMZ JSC, Moscow, Russia:

A. M. Drits, Director for Business and New Technology Development, Candidate of Technical Sciences, e-mail: dritsam@gmail.com

 

Moscow Polytechnic University, Moscow, Russia:
V. V. Ovchinnikov, Head of the Department of Materials Science, Doctor of Technical Sciences, Professor

 

NPO Mashinostroeniya Military & Industrial Corporation, Reutov, Russia:
I. V. Solovieva, Head of the Metallography and Mechanical Testing Laboratory

 

SESPEL Cheboksary Enterprise CJSC, Cheboksary, Russia:
V. A. Bakshaev, Director

ArticleName Influence of silicon on the structure and properties of high-strength cast aluminum alloy AZ5NF
ArticleAuthors Matveev S. V., Fokin D. O., Ryabov D. K.
ArticleAuthorsData

Institute of Light Materials and Technologies Ltd., Moscow, Russia:

S. V. Matveev, Director of the department for Foundry Alloys1, Candidate of Technical Sciences, e-mail: Sergey.Matveev4@rusal.com
D. O. Fokin, Project Manager
D. K. Ryabov, Director of Science

METAL PROCESSING
ArticleName Research of rational roll profiling during cold rolling of tapes from copper and yellow metal
ArticleAuthors Maksimov E. A., Shatalov R. L., Yudin E. A.
ArticleAuthorsData

Joint-Stock Company “Inrau”, Chelyabinsk, Russia:

E. A. Maksimov, Head of Technical Department, Candidate of Techical Sciences, e-mail: maksimov50@mail.ru

 

Moscow Polytechnical University, Moscow, Russia:

R. L. Shatalov, Professor, Doctor of Technical Sciences, e-mail: mmomd@mail.ru

 

Kolchuginsky factory OTSM, Kolchugino, Russia:

E. A. Yudin, Chief Engineer, e-mail: udin73@mail.ru

ArticleName The structure and mechanical properties formed in the soft L63 brass band commercially produced using transverse flux induction heating
ArticleAuthors Pevzner M. Z., Sergeev D. G.
ArticleAuthorsData

Vyatka State University, Kirov, Russia:

M. Z. Pevzner, Professor at the Department of Materials Processing, Candidate of Technical Sciences, e-mail: mikhailpevzner@yandex.ru
D. G. Sergeev, Acting Head of the Department of Mechanical Engineering Technology, Candidate of Technical Sciences, Associate Professor

ArticleName On the question of porosity of aluminum castings obtained by injection molding
ArticleAuthors Gavariev R. V., Savin I. A., Leushin I. O., Gavarieva K. N.
ArticleAuthorsData

Kazan National Research Technical University named after A. N. Tupolev, Kazan, Russia:

R. V. Gavariev, Associate Professor of the Chair for Design and Technology for Machine-Building Industries, Candidate of Technical Sciences, e-mail: gavarievr@mail.ru
I. A. Savin, Head of the Chair for Design and Technology for Machine-Building Industries, Candidate of Technical Sciences, Associate Professor, e-mail: savin.ia@kaichelny.ru

 

Nizhny Novgorod State Technical University named after R. E. Alekseev, Nizhny Novgorod, Russia:
I. O. Leushin, Head of the Chair for Metallurgical Technologies and Equipment, Doctor of Technical Sciences, Professor, e-mail: igoleu@yandex.ru

 

Kazan (Volga Region) Federal University, Kazan, Russia:
K. N. Gavarieva, Teacher, e-mail: gavarievakn@mail.ru

ArticleName Analysis of distribution of deformations during tensile straightening of hot-rolled strips from aluminum alloys
ArticleAuthors Loginov Yu. N., Sobolev D. O.
ArticleAuthorsData

Ural Federal University, Yekaterinburg, Russia:

Yu. N. Loginov, Professor of the Chair for Metal forming, Doctor of Technical Sciences, e-mail: j.n.loginov@urfu.ru
D. O. Sobolev, Undergraduate, e-mail: hfsdlk@mail.ru

Journals →  Tsvetnye Metally →  2021 →  #8