Tsvetnye Metally
The 6th issue of the journal “Tsvetnye Metally” (Non-ferrous metals) (June 2017) shares the issues of theory and practice of ore dressing, complex use of crude ore, production and processing of non-ferrous metals, materials science, etc.
The “Benefication” item is devoted to the 20th anniversary of the Gold Mining Company UGC: the results of improvement of gold-bearing ore processing technologies at the company’s dressing plants are shown.
The item “Noble metals and alloys” conveys the results of pilot testings regarding the technology for processing of Ag-Pb-Zn accumulators in order to obtain silver. The process flowsheet is described and is ready for implementation.
The article by G. D. Apalkova (item “Light metals and carbon materials”) tells about the rammability of aluminum electrolyzer's carbon pastes.
Authors from the I. V. Tananaev Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials researched the solution, obtained during the nitric-acid decomposition of perovskite concentrate. The conclusion was that, together with titanium magnetite and sphene, perovskite belongs to non-traditional titanium raw materials and, fulfilling all the requirements of its complex processing, it makes it possible to obtain products that contain not only Ti, but also Ta, Nb and rare-earth metals.
The article by M. L. Kotsar, V. N. Kaplenkov and Z. M. Alekberov presents an analysis of possible reasons for cracking of titanium alloy products, belonging to the heat-exchange equipment of nuclear energetic tools. Such cracking usually happens as a result of hydration.
You may find below more details about the issue or book printed or electronic version of the journal.
| BENEFICATION | |
| ArticleName | Intensification of pulp separation in beryllium production |
| ArticleAuthors | Tolkachev V. A., Paskhin N. P., Maynikov D. V. |
| ArticleAuthorsData | All-Russian Research Institute of Chemical Technology, Moscow, Russia: |
| ArticleName | Operating results of the flotation machines CFM in the industrial schemes of dressing of copper, copper-zinc and lead-zinc ores |
| ArticleAuthors | Viduetskiy M. G., Maltsev V. A., Panshin A. M., Yochev I. |
| ArticleAuthorsData | TPC “Project institute”, Ural Federal University, Ekaterinburg, Russia:
LLC “UMMC-Holding”, Verkhnyaya Pyshma, Russia:
“Rudmetal” AD, Rudozem, Bulgaria: |
| ArticleName | Heap biooxidation of the off-balance gold-sulfide and polymetallic ores and final tailings |
| ArticleAuthors | Seleznev A. N., Epiforov A. V., Emelyanov Yu. E., Balikov S. V. |
| ArticleAuthorsData | Irkutsk Research Institute of Precious and Reare metals and Diamonds, Irkutsk, Russia: |
| ArticleName | Improvement of processing technologies for gold-bearing ores at the concentrators of the gold mining company UGC |
| ArticleAuthors | Strukov K. I., Plotnikov S. N., Nikolaev Yu. L., Patskevich P. G. |
| ArticleAuthorsData | Gold mining company UGC, Chelyabinsk, Russia: K. I. Strukov, President
JSC “Irgiredmet”, Irkutsk, Russia:
Research Institute of Comprehensive Exploitation of Mineral Resources (IPKON) RAS, Moscow, Russia: |
| ArticleName | The choice of methods of gold-arsenic ores processing (Novotroitsk deposit) taking into account their technological peculiarities |
| ArticleAuthors | Strukov K. I., Plotnikov S. N., Zyryanova L. A., Nikolaev Yu. L. |
| ArticleAuthorsData | Gold mining company UGC, Chelyabinsk, Russia: K. I. Strukov, President
JSC “Irgiredmet”, Irkutsk, Russia: |
| HEAVY NON-FERROUS METALS | |
| ArticleName | Analysis of one of the shaft furnace modernization ways |
| ArticleAuthor | Korol Yu. A. |
| ArticleAuthorData | Yu. A. Korol, Metallurgical Engineer, Ekaterinburg, Russia, e-mail: tsvetmet@rudmet.ru |
| NOBLE METALS AND ALLOYS | |
| ArticleName | Factory testings of silver obtaining from silver-lead-zinc accumulators by two-stage smelting |
| ArticleAuthors | Rogov S. I., Boboev I. R., Atmadzhidi A. S., Ryabova A. V. |
| ArticleAuthorsData | Shchyolkovo Plant of Secondary Precious Metals, Shchyolkovo, Russia: S. I. Rogov, Director of Economic Affairs
National University of Science and Technology “MISiS”, Moscow, Russia: A. S. Atmadzhidi, Post-Graduate Student |
| LIGHT METALS AND CARBON MATERIALS | |
| ArticleName | Assessment of effect of coagulation and sedimentation of dust particles on operation stability of aluminium electrolyzer burners |
| ArticleAuthors | Shakhray S. G., Dekterev A. A., Skuratov A. P., Klimovich L. V. |
| ArticleAuthorsData | Siberian Federal University, Krasnoyarsk, Russia: S. G. Shakhray, Assistant Professor, Chair of Technosphere Safety of Mining and Metallurgical Production, e-mail: shahrai56@mail.ru |
| ArticleName | Rammability of aluminum electrolyzer's carbon pastes |
| ArticleAuthor | Apalkova G. D. |
| ArticleAuthorData | South Ural State University, Chelyabinsk, Russia: G. D. Apalkova, Professor, e-mail: apalkova@yandex.ru |
| RARE METALS, SEMICONDUCTORS | |
| ArticleName | Release of iron-thorium cake from technological solutions after nitric acid opening of perovskite concentrate |
| ArticleAuthors | Mudruk N. V., Korovina Yu. V., Elizarova I. R., Nikolaev A. I. |
| ArticleAuthorsData | I. V. Tananaev Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials (Kola Science Center RAS), Apatity, Russia: N. V. Mudruk, Junior Researcher, e-mail: kirnat@chemy.kolasc.net.ru |
| ArticleName | Processing of rhenium-bearing molybdenite concentrates. Part 2. Catching and extraction of rhenium from sublimates |
| ArticleAuthors | Sitdikov F. G., Galkova L. I., Pikulin K. V., Selivanov E. N. |
| ArticleAuthorsData | JSC Industrial and Creative Enterprise “Rezonans”, Ekaterinburg, Russia: F. G. Sitdikov, Chief Executive Officer
Institute of Metallurgy of Ural Branch of RAS, Ekaterinburg, Russia: |
| COMPOSITES AND MULTIPURPOSE COATINGS | |
| ArticleName | Investigation of wetting and spreading of aluminium on titanium during the formation of aluminium – titanium foam composite materials |
| ArticleAuthors | Kovtunov A. I., Khokhlov Yu. Yu., Myamin S. V. |
| ArticleAuthorsData | Togliatti State University, Togliatti, Russia: A. I. Kovtunov, Professor, e-mail: akovtunov@rambler.ru |
| MATERIALS SCIENCE | |
| ArticleName | Prospective ways of development of directional solidification techniques for turbine blades manufacturing. Part 2 |
| ArticleAuthor | Iakovlev E. I. |
| ArticleAuthorData | All-Russian Institute of Aviation Materials, Moscow, Russia: E. I. Iakovlev, Leading Engineer, e-mail: y-e-i@yandex.ru |
| ArticleName | Obtaining the high-pure titanium based alloys. Investigation of their composition and properties |
| ArticleAuthors | Kotsar M. L., Kaplenkov V. N., Alekberov Z. M. |
| ArticleAuthorsData | Leading scientific-investigation institute of chemical technology (VNIIKhT), Moscow, Russia: M. L. Kotsar, Head of Laboratory, e-mail: kotsar@vniiht.ru |
| METAL PROCESSING | |
| ArticleName | Theoretical and experimental investigations of copper plates dressing and rolling |
| ArticleAuthors | Maksimov E. A., Shatalov R. L. |
| ArticleAuthorsData | JSC “Intray”, Chelyabinsk, Russia: E. A. Maksimov, Head of Technical Branch, e-mail: maksimov50@mail.ru
Moscow Polytechnical University, Moscow, Russia: R. L. Shatalov, Professor, e-mail: mmomd@mail.ru |
