Mekhanobr Engineering, Saint Petersburg, Russia:

V. F. Baranov, Head of Department, Doctor of Engineering Sciences, viktorbaranov@list.ru

The ore pretreatment process evolution is briefly addressed, with some milestones and pioneer projects described. Two advanced projects of concentration mills based on the technology of the pioneer-level high-pressure roll milling are discussed. The operating Canadian Copper Mountain Mill is interesting for using the technology which eliminates bottlenecks of the classical semi autogenous milling circuit, with the resultant increase in the mill capacity more than two times as against the initial project value. This result has been achieved for the first time in the world owing to total rejection of the ore pretreatment circuit and thanks to complete transition to press roller milling. Design and engineering of high-pressure roll mill HRC3000, as well as auxiliary milling and flotation equipment is in progress. The high-capacity Iron Bridge Magnetite Mill under construction in Australia can be assumed as the breakthrough project owing to the world’s first time trial of Enduron high-pressure grinding rolls by Weir Minerals in milling of magnetite quartzite and in dry production of fine products suitable for further processing without ball milling. The power saving in dry milling using high-pressure rolls will make 30 % at the least as compared with the present-day ore pretreatment by wet milling. Ball mills are withdrawn from the processing circuit, water consumption drops, carbon emissions are decreased, and the tailing storage becomes simpler and safer. In dry tailing storage, the capital investment is cut down as the operation of thickening of wet tailings is rejected, dam construction for tailings ponds is eliminated, and the environmental impact related with contamination of surface and ground water bodies, which is intrinsic to operation of conventional tailings storage facilities, is mitigated.

1. Vaisberg L. A., Ustinov I. D. Introduction to the technology of minerals separation. Saint-Petersburg : Russkaya kollektsiya, 2019. 168 p.
2. Mines. Asarco. Available at: https://www.asarco.com/mines/ (accessed: 19.06.2021).
3. Sociedad Minera Cerro Verde S.A.A. Asiento Minero Cerro Verde. Estudio de Impacto Ambiental “Proyecto de Sulfuros Primarios”. Resumen Ejecutivo. Arequipa, 2004. 269 p.
4. Baranov V. F. Designs of new operating copper processing plants: process types, equipment selection, industry trends. Obogashchenie Rud. 2021. No. 1. pp. 44–52. DOI: 10.17580/or.2021.01.08
5. Baranov V. F. Specialties of design-and-spatial-layout solutions and startup problems of modern concentrating plants ore-preparation circuits. Obogashchenie Rud. 2013. No. 1. pp. 3–10.
6. Collins S. E., Holbek P., Strickland D. NI 43-101 Technical Report for the Copper Mountain Mine. Copper Mountain Mining Corporation, 2018. 214 p.
7. Moore P. Copper Mountain 65,000 t/d expansion approved including new HPGR, 4^th ball mill & extra flotation capacity. International Mining. 2020. November.
8. Klue R., Holbek P., Collins S., Westendorf M. Copper Mountain Mine. 65 KT/D Expansion Study and
Life-of-Mine Plan NI 43-101. Technical Report. Copper Mountain Mining Corporation, 2020. 233 p.
9. Burchardt E. Dry finish grinding with HPGRs: The next step ahead in mineral comminution? XVII International Mineral Processing Congress. Chile, 2014. pp. 153–164.
10. About Fortescue. Fortescue Metals Group Ltd, 2020. Available at: https://www.fmgl.com.au/aboutfortescue (accessed: 15.06.2021).
11. Baawuah E., Kelsey C., Addai-Mensah J., Skinner W. Economic and Socio-Environmental Benefits of Dry Beneficiation of Magnetite Ores. Minerals. 2020. Vol. 10, Iss. 11. 955. DOI: 10.3390/min10110955
12. Lu J. Z., Grau J. P. Conventional or High Capacity Thickeners, a Better Choice to Make. Towards Clean Metallurgical Processing for Profit, Social and Environmental Stewardship : Proceedings of the 51^st Annual Conference of Metallurgists of CIM. Niagara, 2012. pp. 363–373.
13. Khaymovskiy S. S. Autogenous grinding mill process control practices. Tsvetnye Metally. 2021. No. 3. pp. 38–42. DOI: 10.17580/tsm.2021.03.03
14. Chanturiya V. A., Bocharov V. A. Modern state and basic ways of technology development for complex processing of non-ferrous mineral raw materials. Tsvetnye Metally. 2016. No. 11. pp. 11–18. DOI: 10.17580/tsm.2016.11.01
15. Bocharov V. A., Ignatkina V. A., Chanturiya E. L., Yushina T. I. Technologies of complex processing of refractory pyritic ores and pyrite technogenic products with extraction of non-ferrous and rare metals. Tsvetnye Metally. 2016. No. 9. pp. 16–20. DOI: 10.17580/tsm.2016.09.01