Journals →  Chernye Metally →  2019 →  #2

Chernye Metally


The second issue of the Chernye Metally journal contains its traditional sections.


It is opened by the steel production section, which presents a new planning mode at the enterprise enabling to improve the observance of the delivery dates of finished products, as well as the technological indicators of vacuum units and the assessment of possible trends in steel production.


The authors from G. I. Nosov MSTU present the results of the effect of niobium alloying on the properties of cast irons of the Cr – Mn – Ni – Ti system.


Two more publications of domestic authors are devoted to foundry production, regarding the environmental safety of the foundry, as well as the manufacturability of slag forming mixtures when casting steel in a caster.


The section rolling and other processes for metal deformation forming contains works on topical issues, including: the influence of the method of processing small-section rolled silica-manganese steel on the quality of scale removal, a new modular-combined method of producing steel wire by drawing through roller and monolithic dies, the effect of the scale factor on the state of strain of deformation zone metal layers during wire drawing and others.


The development of electric drive systems and the role of steel in the electrification of automobiles is the subject of a publication of a Tata Steel representative in the energy and ecology section.


Authors of the publication in the economics and finance section consider the impact of anti-dumping duties on individual subjects and sectors of the state economy.


Please find more details below, or order your printed or electronic version of the Journal.

Steel making
ArticleName Simple control and management on the complicated steelmaking processes
ArticleAuthors C. H. Kiehne, U. Farber, B. Kalis

BGH Edelstahlwerke GmbH (Freital, Germany):

C. H. Kiehne, Dr. Eng., Head of the Activity Area for Technology Management and Management Systems


LF Consult GmbH (Stuttgart, Germany):
U. Färber, CEO, E-mail:
B. Kalis, Project Manager

ArticleName Technological indicators of vacuum units
ArticleAuthors A. Pezza, V. A. Buehler, J. D. Martinez-Cerezo, M. Reising

Primetals Technologies Germany GmbH (Willstätt-Legelshurst, Germany):

A. Pezza, e-mail:

V. A. Buehler

J. D. Martínez-Cerezo

M. Reising

Casting, Foundry Production and Metal Science
ArticleName Effect of niobium addition on the structural-phase composition, mechanical and special properties of cast irons based on the Cr–Mn–Ni–Ti system
ArticleAuthors V. M. Kolokoltsev, E. V. Petrochenko, O. S. Molochkova

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

V. M. Kolokoltsev, Dr. Eng., Prof.
E. V. Petrochenko, Dr. Eng., Prof., e-mail:
O. S. Molochkova, Cand. Eng.

Continuous Casting and Foundry Processes
ArticleName About highly efficient and environmentally friendly foundry technology
ArticleAuthors S. S. Tkachenko, G. A. Kolodiy, L. G. Znamensky, A. A. Ermolenko

Association of Foundrymen of St. Petersburg and Leningrad Region (St. Petersburg, Russia):

S. S. Tkachenko, Dr. Eng., Prof., e-mail:
G. A. Kolodiy


South Ural State University (Chelyabinsk, Russia):
L. G. Znamensky, Dr. Eng., Prof., Chair of foundry production


Plant of Special Chemistry (Chelyabinsk, Russia):
A. A. Ermolenko, Leading Specialist

ArticleName Laboratory and industrial assessment of the processability of the mould flux for steel casting under the conditions of a billet caster according to the “gas bubble” criterion
ArticleAuthors A. N. Smirnov, E. N. Smirnov, V. A. Sklyar, G. A. Orlov

Physical and Technological Institute of Metals and Alloys (Kiev, Ukraine):

A. N. Smirnov, Dr. Eng., Prof.


Staryi Oskol Technological Institute named after A. A. Ugarov
(Staryi Oskol, Russia):
E. N. Smirnov, Dr. Eng., Prof., Chair of Metallurgy and Metal Science, e-mail:
V. A. Sklyar, Cand. Eng., Associate Prof., Chair of Metallurgy and Metal Science


Ural Federal University (Ekaterinburg, Russia):
G. A. Orlov, Dr. Eng., Prof., Chair of Metal Forming

Rolling and Other Metal Forming Processes
ArticleName Influence of the method of processing small-section rolled products from silicon-manganese steel on the quality of scale removal
ArticleAuthors V. A. Lutsenko, T. M. Golubenko, O. V. Lutsenko.

Institute of Ferrous Metallurgy named after Z. I. Nekrasov (Dnepr, Ukraine):

V. A. Lutsenko, Dr. Eng., e-mail:
T. M. Golubenko, Cand. Eng.
O. V. Lutsenko, Cand. Eng.

ArticleName New modular combined steel wire production method
ArticleAuthors V. A. Kharitonov, D. E. Gallyamov

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

V. A. Kharitonov, Cand. Eng., Prof., Dept. of Materials Processing Technology


Beloretsk Metallurgical Plant (Beloretsk, Russia):
D. E. Gallyamov, Leading Engineer-Technologist, Central Plant Laboratory, e-mail:

ArticleName The role of the scale factor in formation of the deformed state of the deformation zone when drawing steel wire
ArticleAuthors V. F. Danenko, L. M. Gurevich, R. E. Novikov

Volgograd State Technical University (Volgograd, Russia)

V. F. Danenko, Cand. Eng., Associate Prof., Deputy Head of “Materials Technology” dept.
L. M. Gurevich, Cand. Eng., Associate Prof., Head of “Material science and Composite materials” dept.
R. E. Novikov, Post-graduate, “Material science and Composite materials” dept. E-mail:

ArticleName Retrofitting a roller leveling machine with a device for bending the front end of a steel sheet to improve the quality of leveling
ArticleAuthor E. A. Maksimov

Intrai CJSC (Chelyabinsk, Russia):

E. A. Maksimov, Cand Eng., E-mail:

ArticleName The review to the monograph “Rolling of tram rails” by S. V. Smetanin, V. N. Peretyatko, A. B. Yuriev and M. V. Filippova
Power Engineering and Ecology
ArticleName Through electricity to sustainable development?
ArticleAuthor H. Adam

Tata Steel Europe Limited (Ijmuiden, the Netherlands):

H. Adam, Dr., Commercial Director, e-mail:

Economics and Finances
ArticleName Economic security of the steel industry in conditions of the anti-dumping duties usage
ArticleAuthors I. L. Ryabkov, N. N. Yashalova

Cherepovets State University (Cherepovets, Russia):

I. L. Ryabkov, Post-graduate of the Business school
N. N. Yashalova, Dr. Econ., Prof., Head of Economics and Management Dept., e-mail:

Conferences and Exhibitions
ArticleName IV International scientifi c-practical conference “Modern technologies in machine-building and foundry production”
ArticleAuthor I. E. Illarionov
ArticleName 85th anniversary of M. I. Arshanskiy
* * *
ArticleName Iron and Steel News
Journals →  Chernye Metally →  2019 →  #2