Белов Николай Александрович




Дата рождения: 17 ноября 1955 г.

 

Образование: Московский институт стали и сплавов (МИСиС), инженер-металлург по специальности «Металловедение и термическая обработка (1978 г.)

 

Ученая степень, ученое звание: Доктор технических наук (1995 г.), профессор (2000 г.)

 

Профессиональная деятельность. Сфера интересов:

• Материаловедение и технология сплавов на основе цветных металлов (прежде всего, на основе алюминия), включая разработку сплавов, анализ многокомпонентных фазовых диаграмм (в том числе, с использованием программы Thermo-Calc);

• Процессы кристаллизации;

• Механические, литейные и физические свойства, фазовые и структурные превращения в процессе кристаллизации и термообработки.

 

Избранные статьи, выступления, монографии с указанием общего числа публикаций:

Более 200 публикаций:

 

• Книги

1. Силумины. Атлас структур и фрактограмм промышленных сплавов: Справ.изд. / Пригунова А. Г., Белов Н. А., Таран Ю. Н. и др. - М.: МИСиС, 1996. - 175 с.

2. Belov, N. A., Aksenov A. A., and Eskin, D. G. Iron in Aluminum Alloys: impurity and alloying element, Fransis and Tailor, 2002, 360 pp.

3. Belov, N. A., Eskin, D. G., and Aksenov A. A. “Multicomponent Phase Diagrams: Applications for Commercial Aluminum Alloys, Elsevier, 2005, 414 pp.

4. Золоторевский В. С., Белов Н. А. Металловедение литейных алюминиевых сплавов - М.: МИСиС, 2005, 376 с.

5. Белов Н. А. Диаграммы состояния тройных и четверных систем (учебное пособие для вузов) - М.: МИСиС, 2007, 360 с.

6. Zolotorevskiy, V. S., Belov, N. A., and Glazoff, M. V. Casting Aluminum Alloys, Elsevier, 2007, 544 pp.

7. Белов Н. А., Савченко С. В., Хван А. В. Фазовый состав и структура силуминов - М.: МИСиС, 2008, 284 с.

8. И. И. Новиков, В. С. Золоторевский, В. К. Портной, Н. А. Белов, Д. В. Ливанов, С. В. Медведева, А. А. Аксенов, Ю. В.Евсеев. Металловедение. Учебник в 2 томах. Под общей редакцией В.С.Золоторевского. Том 1. - М.: Издательский Дом МИСиС, 2009, 496 с.

9. И. И. Новиков, В. С. Золоторевский, В. К. Портной, Н. А. Белов, Д. В. Ливанов, С. В. Медведева, А. А. Аксенов, Ю. В. Евсеев. Металловедение. Учебник в 2 томах. Под общей редакцией В.С.Золоторевского. Том 2. - М.: Издательский Дом МИСиС, 2009, 528 с.

10. Белов Н. А., Савченко С. В., Белов В. Д. Атлас микроструктур промышленных силуминов- М.: Издательский Дом МИСиС, 2009, 204 с.

11. Белов Н. А. Фазовый состав алюминиевых сплавов- М.: Издательский Дом МИСиС, 2009, 392 с.

12. Белов Н. А. Фазовый состав промышленных и перспективных алюминиевых сплавов- М.: Издательский Дом МИСиС, 2010, 511 с.

13. Н. А. Белов, В. Д.Белов, С. В. Савченко, М.Е . Самошина, В. А. Чернов, А. Н.Алабин. Поршневые силумины (под.ред. Н. А. Белова) - М.: Руда и металлы, 2011, 246 с.

 

Статьи (в международных издательствах):

1. Belov N. A. ‘Principles of Optimising the Structure of Creep-Resisting Casting Aluminium Alloys Using Transition Metals’, Journal of Advanced Materials, 1994 1 (4), p. 321-329.

2. Belov N. A., Zolotorevskii and Luzgin D. V. Effect of heat treatment on the morphology of iron-bearing phases in aluminium alloys. Journal of Advanced materials 1996 3 (3) 228-238.

3. Belov N. A. “Aluminium Casting Alloys with High Content of Zirconium”. Proc.5th Int.Conf.on Al-Alloys and Their Physical and Mechanical Properties (ICAA5), 1-5.07.96 Grenoble, France, Materials Science Forum,1996 Vol. 217-222, P. 293-298.

4. Belov, N. A., Gusev, A. Yu., and Eskin, D. G. «Evaluation of Five-Component Phase Diagrams for the Analysis of Phase Composition in Al-Si Alloys» Z. Metallkde., 1998, vol. 89, no. 9, pp. 618–622.

5. Belov, N. A., Naumova E. A., and Eskin, D. G. “Casting alloys of the Al-Ce-Ni System: Microstructural Approach to Alloy Design” Mater. Sci. Eng. A, 1999 Nov, vol./issue 271/1-2 , pp. 134-142.

6. Aksenov A. A., Belov N. A., and Medvedeva S. V. «The Al–Si–C phase diagram and its use for microstructural analysis of MMCp and MMCf composite materials» Z. Metallkde., 2001, vol. 92, no. 9, pp. 1103-1110.

7. Belov N. A., Zolotorevskii V. S. Prospects for new aluminium alloys based on multiphase eutectics. Journal of Advanced materials, 2001, vol.5, no 3, pp. 1-8.

8. Aksenov A. A., Belov N. A., and Medvedeva S. V. «Use of Al–Si–C phase diagram for analyzing phase transformation in aluminum-based composites». Russian Journal of Non-ferrous Metals, 2001, vol.42, No 1 pp.15-23.

9. Belov N.A., Zolotorevskii V.S. “Optimization of the composition of low-silicon silumins in order to increase mechanical properties in the castable state” Russian Journal of Non-ferrous Metals, 2001, vol.42, No 10 pp.37-47.

10. Belov N. A., Zolotorevskij V.S. “Al-Cu-Mn-Zr-Cr creep resisting alloys: microstructure and mechanical properties” in: “Advances in the metallurgy of aluminum alloys”, Proceedings of the James T. Staley Honorary Symposium on Aluminum Alloys (from ASM Material Solution Conference), Ed. M.Tiryakioglu, ASM International, Material Park, Ohio, 2001, pp. 425-431.

11. Belov N. A. V. S. Zolotorevskij, “The Effect of Nickel on the Structure, Mechanical and Casting Properties of Aluminium Alloy of 7075 Type” Proc.8th Int.Conf.on Al-Alloys and Their Physical and Mechanical Properties (ICAA8), 1-5.07.02 Cambridge, UK, Materials Science Forum. Vol.396-402, Part 2, P.935-940.

12. Belov N. A., V. S. Zolotorevskij, A. S. Shatrov. “Selecting of aluminium casting alloys for plasmochemical ceramic coating”, Proc.8th Int.Conf.on Al-Alloys and Their Physical and Mechanical Properties (ICAA8), 1-5.07.02 Cambridge, UK, Materials Science Forum. Vol.396-402, Part 3, P.1709-1714.

13. Belov N. A., Koltsov A. V., and Eskin D. G. ”The Al-Cu-Fe-Mg-Si Phase Diagram in the Range of Al-Cu Alloys”, Proc.8th Int.Conf.on Al-Alloys and Their Physical and Mechanical Properties (ICAA8), 1-5.07.02 Cambridge, UK, Materials Science Forum. Vol.396-402, Part 2, P.929-934.

14. Shojo Goto, Byung-II Kim, Hyeoung-Ho Park, Nikolay A.Belov, Vadim S.Zolotorevkij, Setsuo Aso, Yushinari Komatsu “Application of Multiphase Eutectics to Development of High Strength Cast Aluminum Alloys”, Journal of Society of Materials Engineering for Resources of Japan, 2002, Vol.15, No 2, pp.66-73.

15. Belov N. A., Alabin A. N.; and Eskin D. G. “Improving the Properties of Cold Rolled Al-6%Ni sheets by alloying and heat treatment”, Scripta Materialia, 2004, vol. 50/1, pp. 89-94.

16. Belov N. A., Alabin A. N.; Istomin-Kastrovskiy V. V. “The Influence of Zirconium and Silicon Additions on the Microstructure and Hardening of Al–2% Mn Sheet Alloys”, Proc. ICAA9 (Brisbane, August 2004), Materials Science Forum, 2004 pp.1270-1275.

17. Belov N. A. “Quantitative analysis of the Al–Fe–Mg–Si state diagram in the range of the aluminum alloys of the 6XXX series”. Russian Journal of Non-Ferrous Metals, 2005, Vol. 46, No. 1, pp. 26–35

18. Belov N. A, Eskin D. G., and Avxentieva N. N. “Constituent Phase Diagrams of the Al–Cu–Fe–Mg–Ni–Si System and their Application to the Analysis of Aliminium Piston Alloys”, Acta Materilia, 2005, vol.53, p.4709-4722.

19. Belov N. A., Cheverikin V. V., Eskin D. G., and Turchin A. N. “Effect of Al3Ni and Mg2Si eutectic phases on casting properties and hardening of an Al–7% Zn–3% Mg alloy”, (Proc. ICAA10, Vancouver, 9-14 July 2006), Trans Tech. Publications, Ueticon-Zuerich, 2006, pp.413-418.

20. Belov N. A., Khvan A. V. and Alabin A. N. “Microstructure and Phase Composition of Al-Ce-Cu Alloys in the Al-rich corner”, (Proc. ICAA10, Vancouver, 9-14 July 2006), Trans Tech. Publications, Ueticon-Zuerich, 2006, pp.395-400.

21. Aksenov A. A., Samoshina M. E, Belov N. A. “Structure and properties of mechanically alloyed composite materials from scrap of Al alloys”, (Proc. ICAA10, Vancouver, 9-14 July 2006), Trans Tech. Publications, Ueticon-Zuerich, 2006, pp.1305-1310.

22. Belov N. A., Alabin A. N., Istomin-Kastrovskii V. V., and Stepanova E. G. «Influence of annealing the structure and mechanical properties of cold-rolled» sheets of Al-Zr-alloys. Russian Journal of Non-Ferrous Metals, 2006, Vol. 47, No. 3, pp. 37–43.

23. Belov N. A, Alabin A. N., Eskin D. G., and Istomin-Kastrovskiy V. V. “Optimization of Hardening of Al–Zr–Sc Casting Alloys”, Journal of Material Science, 2006, 41, p.5890-5899.

24. Belov N. A., Khvan A. V. “The ternary Al-Ce-Cu phase diagram in the Al-rich corner”, Acta Materilia, 2007, vol.55, p.5473-5482.

25. Turchin A. N., Eskin D. G., Pool J., Belov N. A., Katgerman L. Solute transport and phase composition in an Al–Mg–Si alloy solidified under conditions of forced flow”. Int. J. Mat. Res. (formely Z.Metallkd.) 99 (2008), P.26-35.

26. Belov N. A. and Alabin A. N “Microstructure and mechanical properties of Al-Cu-Mn cold rolled sheet alloys” in «Aluminium Alloys: Their Physical and Mechanical Properties”, Ed. J.Hirsch. B.Scrotzki and G.Gottstein, DCM, 2008, P. 1653-1659 (Proc. ICAA11, Germany Aahen, 22-26.09.08).

27. Belov N. A. and Khvan A. V. “The Structure and Mechanical Properties of Eutectic Alloys of the Al-Ce-Cu System” in «Aluminium Alloys: Their Physical and Mechanical Properties”, Ed. J.Hirsch. B.Scrotzki and G.Gottstein, DCM, 2008, P. 169-175 (Proc. ICAA11, Germany Aahen, 22-26.09.08).

28. Padalko A. G., Belov N. A., Veselov A. N., and Talanova G. V. “Thermography of the Phase Transformationsin a Hypoeutectic Al–7% Si–0.5% Mg Silumin at High Pressures and Temperatures”, Russian Metallurgy (Metally), Vol. 2009, No. 1, pp. 65–69.

29. Belov N.A, Alabin A. N. and Prokhorov A. Yu. “The Influence that a Zirconium Additive has on the Strength and Electrical Resistance of Cold-Rolled Aluminum Sheets”, Russian Journal of Non-Ferrous Metals, 2009, Vol. 50, No. 4, pp. 357–362

30. N. A. Belov “Quantitative Phase Analysis of the Al–Zn–Mg–Cu–Ni Phase Diagram in the Region of Compositions of High_Strength Nickalines”, Russian Journal of Non-Ferrous Metals, 2010, Vol. 51, No. 3, pp. 243–249.

31. N. A. Belov, A. N. Alabin, E. G. Karacharova, N. B. Emelina "Appropriateness of Doping Siluminswith Titanium and Zirconium Additives.”, Russian Journal of Non-Ferrous Metals, 2010, Vol.51 , No.4 , pp. 308-315..

32. Belov N. A., Belov V. D., Alabin A. N., Mishurov S. S. Sparingly alloyed aluminium alloys of new generation, Metallurgist, 2010, P.311-316.

33. Belov V. D., Koltygin A. V., Belov N. A., Plisetskaya I. V. Innovations in area of cast magnesium alloys, Metallurgist, 2010, P.317-321.

34. N. A. Belov, A. N. Alabin, and A. Yu. Prokhorov “Electrical Resistance and Strength of Cold Rolled Sheets of Aluminum Alloys Containing up to 0.64 wt.%Zr”. Proceedings of the 12th International Conference on Aluminium Alloys, September 5-9, 2010, Yokohama, Japan. The Japan Institute of Light Metals, pp. 1107-1112.

35. A. N. Alabin, N. A. Belov, and A. Yu. Prokhorov “The Effect of Zirconium and Scandium Additions on Electrical Resistance, Strength and Thermal Stability of Cold Rolled Aluminum Sheets” Proceedings of the 12th International Conference on Aluminium Alloys, September 5-9, 2010, Yokohama, Japan. The Japan Institute of Light Metals, pp. 1055-1960.

36. N. B. Emelina, A. N. Alabin, N. A. Belov “Influence of Bismuth and Lead on the Formation of the Structure of Experimental Alloys with a Cu–30% Zn_Based Composition during Crystallization, Deformation, and Thermal Treatment ”, Russian Journal of Non-Ferrous Metals, 2010, Vol.51 , No.6 , pp.476-482.

37. N. A. Belov, A. N. Alabin, A. A. Yakovlev “Influence of the Annealing Temperature on the Phase Composition of Al–0.55 wt % Zr Cast Alloy ”, Russian Journal of Non-Ferrous Metals, 2013, Vol. 54, No. 3, pp. 224–228.

38. N. A. Belov “Quantitative Analysis of the Primary Crystallization of IronContaining Phases as Applied to Aluminum Alloysof Various Doping System”, Russian Journal of Non-Ferrous Metals, 2013, Vol.54, No. 4 , pp. 300-306.

39. N. A. Belov, N. N. Avxentieva “Quantitative Analysis of the Al – Cu – Mg – Mn – Si Phase Diagram as Applied to Commercial Aluminum Alloys of Series 2xxx “Metal Science and Heat Treatment, 2013, Vol. 55 , Issue 7 (2013), P. 358-363.

40. T. K. Akopyan, N. A. Belov, A. N. Alabin and G. S. Zlobin «Calculation-Experimental Study of the Phase Composition of Al–Zn–Mg–(Cu)–Ni–Fe Aluminum Alloys» Russian Metallurgy (Metally), Vol. 2013, No. 7, pp. 545–552.

41. N. A. Belov and A. N. Alabin “Energy Efficient Technology for Al–Cu–Mn–Zr Sheet Alloys”, Materials Science Forum Vol. 765 (2013) pp 13-17.

42. A. Amenova, N. Belov, D. Smagulov, A. Toleuova Scientifically based choice of heat-resistant cast aluminum alloys of new generation, Applied Mechanics and Materials Vol. 372 (2013) pp 49-53.

43. N. A. Belov, M. E. Samoshina “Influence of the Thermal Treatment Temperature on the Microstructure and Phase Composition of Casts of β-Solidifying TNM Alloy Based on the Ti–Al–Nb–Mo System”, Russian Journal of Non-Ferrous Metals, 2014, Vol. 55, No. 1, pp. 37–45.

44. N. A. Belov, I. S. Chupakhin “Quantitative Analysis of Phase Composition of Alloy TNM-B1 based on TiAl(γ) Titanium Aluminide “, Metal Science and Heat Treatment, 2014, Volume 55, Issue 9 (2014), Page 486-491.

45 N. A.Belov, A. N. Alabin, I. A. Matveeva “Optimization of Phase Composition of Al–Cu–Mn–Zr–Sc Alloys for Rolled Products without Requirement for Solution Treatment and Quenching”, Journal of Alloys and Compounds, Vol.583 (2014), p.206–213.

46. N. A. Belov and M. E. Samoshina “Influence of the Thermal Treatment Temperature on the Microstructure and Phase Composition of Casts of β-Solidifying TNM Alloy Based on the Ti–Al–Nb–Mo System”, Russian Journal of Non-Ferrous Metals, 2014, Vol. 55, No. 1, pp. 37–45.

47. N. A. Belov, E. I. Kurbatkina, M. Gorshenkov “Structure and Phase Composition of Composite Pellets Based on the ALTEK Heat Resistance Aluminum Alloy with BoronContaining Filler ”, Russian Journal of Non-Ferrous Metals, 2014, Vol. 55, No. 2, pp. 182–185.

 

Место работы: НИТУ «МИСиС»

 

Координаты для связи:

119049 Москва, Ленинский пр-т, д.4, МИСИС, комната А-103

Тел.: 8 (495) 951-19-28

E-mail: nikolay-belov@yandex.ru