Eurostampi srl: 25 years of passion, innovation and ... satisfaction!

Eurostampi srl is a company specialized in the design and construction of molds, particularly injection molds for plastics and die-casting molds for aluminum and zamak.

Its strengths are its highly qualified personnel, advanced technologies, extensive experience and dedicated initiative to successfully meet the needs of its customers.

“We've always been driven by a passion to solve problems that others couldn't.”

Eurostampi's adventure began a quarter of a century ago, born from the passion and insight of Valentino Dall'Igna.

Actually, Eurostampi has been dedicated to its customers since 1988, providing state-of-the-art services with continuous investments in Research and Development, the use of constantly updated technologies and a passion for “problem solving” that the owner succeeds in conveying to his employees and the company's suppliers, chosen according to precise quality and reliability criteria.

“It's been 25 years since we purchased our first automated duplicator. A tool which, acquired at the beginning of our story, led us to become one of the most far-sighted and innovative companies in the mold sector.”

In 1996 the company established its headquarters in Sarcedo, expanding over the years up to the presentday facility with about 2000 m2 dedicated to the development, design and production of molds as well as the assembly of products, including the special line dedicated to its Ecology products.

Constantly searching for materials that favor the development of products with minimal environmental impact, Eurostampi's green commitment goes well beyond its company policy. The Ecology line actually proposes products and technologies with low or no environmental impact, capable of improving the ecological footprint of our cities and, with it, the quality of life of the people living in them. These are manual or energy-efficient compactors that are safe and easy to use. Designed for industrial, residential and commercial use, they can save time and money while improving waste management, disposal and recycling. From its very beginning, Eurostampi has distinguished itself for immediately providing a complete service to its customers. Thus it does not merely produce the mold, but provides complete assistance starting with project evaluation, study and production of 2D and 3D projects, up to prototyping and final production.

The company is equipped with state-of-the-art CAD/CAM technologies and three-dimensional scanners so its engineers can study the projects in every detail and make any necessary modifications, in co-design with the customer, in order to obtain maximum-quality products.

“There are many examples, but I particularly remember when we succeeded in lowering the production cost of a particular piece by about 90% for a customer that produces stoves. Our knowledge in the field of plastic materials and our experience in design led the customer to completely change the production process for that
particular piece with outstanding savings, so much so as to never go back. We were the first to propose a solution of this kind.”

There are many sectors in which the company boasts extensive experience, including: automation, automotive, furnishings, burners and stoves, housewares, bikes and motorcycles, design, lightning design, domotics, ecology, building, household appliances, electronics, hobbies, lighting, CCTV systems, etc. Aprilia, Audi, Bft, Bosch, Came, Daspi, Ecoflan, Estel, Faac, Ferrari, Fiat, Gruppo Merloni, Ikea, Iveco, Lamborghini Bruciatori, Marelli Motori, Meliconi, Mercedes, Nordica, Cuenod, Reggiani, Renault, Somfy and Trenitalia are just some of the prestigious names which Eurostampi has had the pleasure to work with over the years.

The year 2014 will be an important year rich with innovation.

Eurostampi will launch an innovative line of products for the Food sector, with an investment of € 500,000.00 planned for its completion.

New products and technologies will also be developed for the packaging sector and the flow of liquids. Furthermore, an expansion of the assembly lines is planned, along with new investments for product distribution and company marketing, in addition to further enlargement of the design department and business office in terms of both space and staff.

The company is also investing in its market internationalization process, for which the foreign turnover is expected to grow from 15% in 2012 to 21% in 2013.

The goal is to confirm and increase this growth trend for the year 2014 as well.

So 25 years later, retracing its footsteps from the very beginning, Eurostampi completely renews its image and message, starting with its fast, dynamic and interactive company site, strengthening its customer care service and expanding the possibilities for direct interaction with its suppliers and customers, topped off with the new web area within which users will be able to find information and technical data on the technologies and materials used by the company.

Thus Eurostampi positions itself among the most competitive companies on the Italian market of injection and die-casting molds and stands to become a key leader in the sector, even on an international level.

Based Eurostampi srl information