Journals →  Tsvetnye Metally →  2012 →  #1 →  Back

EQUIPMENTS, INDUSTRIAL AUTOMATION, MATHEMATICAL SIMULATION
ArticleName The installation for continuous synthesis of ultra- and nano powders of oxide materials in real ceramic production
ArticleAuthor Katznelson L. M., Kerbel B. M.
ArticleAuthorData

“Scientific Production Enterprise “Technologika”, Ltd

L. M. Katznelson, General Director, e-mail: lk783395@gmail.com

 

Seversk Technological Institute of National Research Nuclear University “MEPhI”

B. M. Kerbel, Head of Information and Analytical Department, Professor

Abstract

The article deals with designing an installation for continuous synthesis of ultra- and nanopowders of oxide materials. The optimization criteria of the installation design solutions are considered. The design solutions are based on the results of the analysis of the specific technology of continuous solid-phase synthesis, formulated as the basic principle of the continuity of the process at all stages, which means technological interconnection between the feed rate of the granulated mixture into the pre-heated reaction chamber, isothermal soaking time, the volume of the oxide material being synthesized and its removal from the reaction chamber. They are determined by the time and temperature conditions of every specific material synthesis. The installation is made up of separate blocks, each with its own functions. The blocks, in turn, consist of modules which can be of different design, depending on the conditions of oxide material synthesis. Experimental results of some oxide material synthesis are given, as well as the possibility to convert them to nanostructure on the example of titanium dioxide. It is demonstrated that the installation for continuous synthesis in real ceramic production enables significant reduction of the time of oxide material synthesis and to simplify the whole technology of ceramic production. The cycle time of pellet manufacturing is ten times less as compared with the conventional technology.

keywords Technology, continuous solid-phase synthesis, oxide materials, installation, design, specifications
References

1. Patent 2344107 (S1) RF, S 04 V 35/64, S 04 V 35/626, F 27 B 1/09. Sposob tverdofaznogo sinteza oksidnykh materialov i ustanovka nepreryvnogo sinteza dlya ego realizatsii (Method of oxide material solidphase synthesis and a continuous synthesis machine for its realization). Katsnelson L. M., Tsikhotskiy E. S. No. 2007115363/03 ; asserted 23.04.2007 ; published 20.01.2009, Bulletin No. 2.
2. Kingeri U. D. Vvedenie v keramiku (Introduction to Ceramics). Moscow, 1967. 499 p.
3. Smazhevskaya E. G., Feldman N. B. Pezoelektricheskaya keramika (Piezoelectric Ceramics). Moscow, 1971. 199 p.
4. Glozman I. A. Pezokeramicheskie materialy v elektronnoy tekhnike (Piezoceramic Materials in Electronic Equipment). Moscow, 1971. 266 p.
5. Dzhagupov R. G., Erofeev A. A. Pezoelektronnye ustroystva vychislitelnoy tekhniki, sistem kontrolya i upravleniya : spravochnik (Piezoelectric Devices of Computing Machinery, Monitoring and Control Systems : a referense book). Saint Petersburg, 1994. 608 p.
6. Kerbel B. M., Udut D. L., Artyukhina L. V. Pribory i tekhnika eksperimenta — Instruments and Experimental Techniques. 2002. No. 2. pp. 164.
7. Katsnelson L. M. Nepreryvnyy tverdofaznyy sintez oksidnykh materialov : Informatsionno-analiticheskiy portal Rossiyskoy nanotekhnologicheskoy seti, 13.05.2010 (Continuous solid-phase synthesis of oxide materials : Information and analytical portal of the Russian nanotechnological network, May 13, 2010). [An electronic resource]. Available at : http://www.rusnanonet.ru
8. Katsnelson L. M. Nanotekhnologii funktsionalnykh materialov (NFM’10). Trudy mezhdunarodnoy nauchnotekhnicheskoy konferentsii. 22–24 sentyabrya 2010 g. (Nanotechnologies of Functional Materials (NFM’10). Proceedings of the International Scientific and Technical Conference. September 22–24, 2010). Saint Petersburg, 2010. pp. 417–418.

Language of full-text russian
Full content Buy
Back