Journals →  Tsvetnye Metally →  2011 →  #10 →  Back

Beneficiation
ArticleName Technology of waterless separation of granular mixtures, based on difference of components physical properties and geometrical parameters of particles
ArticleAuthor Tyukin A. P.
ArticleAuthorData

Kola MMC

A. P. Tyukin, Chief Expert on Precious Metals, e-mail: TukinAP@KolaGMK.ru

Abstract

At present, many factories which are associated with precious metals production, have to separate metallized particles from minerals without using water. Especially it is urgent at gold-placed mines uncovered in arid regions, and in certain fragments of existing technologies not equipped for performing classic processes of gravity concentration. As opposed to today’s gravity concentration methods, there is the technology developed by Alexander P. Tyukin, key specialist of the technological section, security dept., Metallurgical and mining company “Norilsk Nickel”, JSC, Polar division. This technology uses difference between materials’ friction coefficient and hit restore factor in pair with chosen surface, instead of using only difference in density and geometry. At first, the technology includes preliminary aerodynamical separation of three flows: concentrate, intermediate product and reject. In this phase every particle individually gets irregular acceleration, which is initiated by ram pressure loading created by laminar air flow. Intermediate product hits profiled surface, and according to aforesaid physical properties, particles of different components bounce off in different directions with different speeds providing extra separation. In experiments performed by author, hit separation made it possible to reduce circulating load of aerodynamical separator by 37.5%.

keywords Precious metals, dry separation, partition, gravity concentration, placer deposits, gold, platinum
References

1. Evdokimov S. I., Solodenko A. A., Bdaytsiev P. E. 4-y Kongress obogatiteley stran SNG, Moskva, 19–21 marta 2003 : materialy kongressa (4th Congress of CIS Dressers, Moscow, March 19–21, 2003 : collection of materials). Moscow, 2003. Vol. 2. Moscow, 2003. pp. 153–155.
2. Zakharov B. A. Issledovanie, razrabotka i vnedrenie tekhnologii gravitatsionnogo izvlecheniya blagorodnykh metallov pri obogashchenii vkraplennykh medno-nikelevykh rud Noril'skogo promyshlennogo rayona : avtoref. dis. … kand. tekhn. nauk. Gos. NII tsv. met. (Research, development and introduction of precious metals gravity extraction in beneficiation of the impregnated copper-nickel ores of the Norilsk industrial region : abstract of a thesis ... Candidate of Engineering Sciences. State Scientific-Research Institute of Non-ferrous Metals). Moscow, 2004.
3. Dementeva N. A., Vasileva A. V., Kin L. V. Tekhnologiya izvlecheniya tsennykh komponentov iz zoloto-barito-polimetallicheskoy rudy. Materialy Mezhdunar. soveshchaniya «Sovremennye metody otsenki tekhnologicheskikh svoystv trudnoobogatimogo i netraditsionnogo mineralnogo syrya blagorodnykh metallov i almazov i progressivnye tekhnologii ikh pererabotki (Plaksinskie chteniya 2004)», Irkutsk (The technology of valuable components extraction from the gold-barite polymetallic ore. Materials of the International Session “Modern methods of technological properties assessment for rebellious and non-traditional mineral resources of precious metals and diamonds, and advanced technologies of their processing” (“Plaksin reading 2004”). Moscow, 2004.
4. Ferrara G. 5th Inter. Miner. proc. cong. inst. and metal. London, 1960. pp. 173–174.
5. Ferrara G. Tenth inter. miner. proc. cong. London IMM, 1974. pp. 313–316.
6. Irwin A. Min. review. 1982. Vol. 2 (4). pp. 41–43.
7. Certificate of authority 973191 SSSR, MKI V 07 V 4/00. Ustroystvo dlya klassifikatsii sypuchikh materialov (A device for bulk solids classification). N. I. Vitsenko. No. 3231282/29-03 ; Asserted 05.01.1981 ; Published 15.11.1982.
8. Certificate of authority 1639778 SSSR, MKI V 07 V 9/00. Ustanovka dlya aerodinamicheskogo obogashcheniya sypuchikh materialov (An apparatus for aerodynamic beneficiation of bulk solids). A. K. Brovtsyn, V. P. Zvonarev. No. 4705955/03 ; Asserted 03.05.1989 ; Published 23.02.1992.
9. Patent 102312 RF. Ustroystvo dlya separatsii chastits iz sypuchikh materialov (A device for particles separating from the bulk solids). Tyukin A. P. ; Asserted 13.03.2009 ; Published 27.02.2011.
10. Drong V. I., Dubinin V. V., Ilin M. M. Kurs teoreticheskoy mekhaniki : uchebnik dlya vuzov. Pod obshch. red. K. S. Kolesnikova (Course of Theoretical Mechanics: a text-book for high schools. Ed. K. S. Kolesnikov). Moscow, 2005. — 736 p.

Language of full-text russian
Full content Buy
Back