• Покупка статей
  • Telegram_OreMet
Скрыть↑
Журналы →  Tsvetnye Metally →  2009 →  №10 →  Назад

Metal processing
Название Annealing effect on electrical resistance and mechanical properties of cold-worked alloy Al–0,6 % (mass) Zr
Автор Belov N. A., Alabin A. N., Prokhorov A. Yu.
Информация об авторе Belov N. A., e-mail: nick-belov@mail.ru
Реферат Influence of annealing cycles on electrical resistance and mechanical properties of cold-drawn wire and cold-rolled sheets manufactured from cast ingots of А7Е alloys without zirconium and with 0,6 % Zr is studied. The additive of ~0,6 % zirconium does not worsen fabricability at cold deformation and essentially raises durability of the deformed semifinished material in annealed condition (at 300–400 °C) in comparison with unalloyed aluminum. Zirconium hikes electrical resistance in cold-worked condition in comparison with the technical aluminum, however the subsequent annealing allows to achieve its decrease. Level of this decrease is defined, first of all, by concentration of zirconium in an aluminum solid solution.
Ключевые слова Low-alloyed aluminum alloys, dispersoids, aluminum wire, conductivity, aluminum conductors.
Библиографический список 1. Promyshlennye alyuminievye splavy : spravochnik / pod red. F. I. Kvasova, I. N. Fridlyandera. - M. : Metallurgiya, 1984.
2. Aluminiy. Svoystva i fizicheskoe metallovedenie : Spravochnik / pod red. Dzh. Hetcha. - M.: Metallurgiya, 1989.
3. GOST 11069-2001. Alyuminiy pervichnyy. Marki. - Vved. 2003-01-01. - M. : Izd-vo standartov, 2002.
4. GOST 13843-78. Katanka aluminievaya. Tekhnicheskie usloviya. - Vved. 1984-01-01. - M. : Izd-vo standartov, 1985.
5. GOST 20967-75. Katanka iz aluminievogo splava.Tekhnicheskie usloviya. - Vved. 1976 -01-01.- M. : Izd-vo standartov, 1975.
6. Aluminievyy kompozitnyy usilennyy provod – novoe izobretenie dlya vysokovoltnykh vozdushnykh LEP // Energoekspert. 2007. N 3. S. 60-62.
7. Belov N. A., Istomin-Kastorovskiy V. V., Alabin A. N. // Izv. Vuzov. Tsvetnaya metallurgiya. 2003. N 4. P. 54-60.
8. Belov N. A., Alabin A. N., Eskin D. G., IstominKastrovskiy V. V. // J. Mater. Sci. 2006. Vol. 41. P. 5890–5899.
9. Belov N. A., Alabin A. N., Istomin-Kastorovskiy V. V., Stepanova E. G. // Izv. vuzov. Tsvetnaya metallurgiya. 2006. N 2. P. 60-65.
10. Uliasz P., Knych T., Mamala A., Smyrak B. // Aluminium alloys : Their physical and mechanical properties / ed. J. Hirsch, B. Scrotzki, G. Gottstein. — Weinhein : WileyVCH, 2008. Vol. 1. P. 248–255.
11. Pat. 4402763 US. C 22 C 21/00, C 22 F 1/04. High conductive heat resistant aluminum alloy / Kenichi S., Kazuhisa Y. ; appl. 04.08.81 ; publ. 09.06.83.
Language of full-text русский
Полный текст статьи Получить
Назад