Journals →  Eurasian Mining →  2023 →  #2 →  Back

DEVELOPMENT OF DEPOSITS
ArticleName Improving efficiency of rock breaking using pre-weakening of rock mass
DOI 10.17580/em.2023.02.13
ArticleAuthor Aben E. Kh., Malanchuk Z. R., Fedotenko V. S., Orynbaev B. A.
ArticleAuthorData

Satbayev University, Almaty, Kazakhstan

Aben E. Kh., Associate Professor, Candidate of Engineering Sciences

Orynbaev B. A., Candidate for a Doctor’s Degree

 

National University of Water and Environmental Engineering, Rovno, Ukraine
Malanchuk Z. R., Professor, Doctor of Engineering Sciences

 

Institute of Problems of Integrated Development of Mineral Resources, Moscow, Russia

Fedotenko V. S., Deputy Science Director, Doctor of Engineering Sciences, victorfedotenko@gmail.com

Abstract

The purpose of this study is to improve the quality of drilling and blasting operations using pre-weakening of rock mass. The approach used in the study involved pilot testing of the pre-weakening technology efficiency at the Ayak-Kodzhan open pit in Kazakhstan. The testing plan included five blasts using the standard technology and five blasts with the pre-weakening technology with subsequent change in the drilling-and-blasting parameters toward their optimization for increasing the breaking efficiency. The K-MINE: Grain Size module (developed by K-MINE, Kryvyi Rih, Ukraine) was used to determine the granulometric composition of blasted rock mass and to assess the quality of fragmentation by blasting during rock excavation. In addition, the rate of rock mass loading to dump trucks, the bench bottom condition and the slope fracturing were evaluated.

The authors would like to express their gratitude to the Committee on Science of the Ministry of Science and Higher Education of the Republic of Kazakhstan for providing grant No. AP14871011, which made this research possible. The authors would also like to thank all the participants and contributors to this study for their valuable input and cooperation.

keywords Ore breaking, explosive, fragmentation quality, pre-weakening, blasthole efficiency ratio, burden
References

1. Park J., Kim K. Use of drilling performance to improve rock-breakage efficiencies: A part of mine-to-mill optimization studies in a hard-rock mine. International Journal of Mining Science and Technology. 2020. Vol. 30. Iss. 2. pp. 179–188.
2. Zharikov S. N., Shemenev V. G., Kutuev V. A. Ways to clarify the properties of rocks during drilling and blasting operations. Sustainable Development of Mountain Territories. 2017. Vol. 9, No. 1(31). pp. 74–80.
3. Afeni T. B. Optimization of drilling and blasting operations in an open pit mine — the SOMAIR experience. Mining Science and Technology (China). 2009. Vol. 19, Iss. 6. pp. 736–739.
4. Li X., Liu K., Yang L., Song R. Numerical study on blast-induced fragmentation in deep rock mass. International Journal of Impact Engineering. 2022. Vol. 170. ID. 104367.
5. Ma T., Li F., Yang Y., Li L. Study on energy evolution and crack propagation of rock mass under single hole uncoupled charge blasting. Applications in Engineering Science. 2022. Vol. 11. ID. 100112.
6. Leng Z., Fan Y., Gao Q., Hu Y. Evaluation and optimization of blasting approaches to reducing oversize boulders and toes in open-pit mine. International Journal of Mining Science and Technology. 2020. Vol. 30, Iss. 3. pp. 373–380.
7. Piyush R., Hakan S., Per-Arne L., Uday K. Measurement-while-drilling technique and its scope in design and prediction of rock blasting. International Journal of Mining Science and Technology. 2016. Vol. 26, Iss. 4. pp. 711–719.
8. Kabetenov T., Yusupov Kh. A., Rustemov S. T. Rational parameters of blasting, considering action time of explosion-generated pulse. Journal of Mining Science. 2015. Vol. 51, No. 2. pp. 261–266.
9. Lyashenko V. I., Khomenko O. E. Enhancement of confined blasting of ore. GIAB. 2019. No. 11. 59–72.
10. Singh M. M., Singh R. B., Gupta R. N. Blast design to improve fragmentation in a mismatched combination of drill diameter and depth in bedded rock. Mining Science and Technology. 1991. Vol. 12(2). pp. 179–186.
11. Holmberg R. 20 – Drilling and blasting of rock masses. Engineering in Rock Masses. 1992. 385–399.
12. Yegemberdiyev R. I., Ugolnikov N. V., Yusupov Kh. A., Stolpovskikh I. N. Justification of blasthole expansion parameters in ring blasting. GIAB. 2019. Vol. 11. pp. 48–58.
13. Munene Kinyua E., Jianhua Z., Richard M. Kasomo, Mauti D., Mwangangi J. A review of the influence of blast fragmentation on downstream processing of metal ores. Minerals Engineering. 2022. Vol. 186. ID. 107743.
14. Huo X., Shi X., Qiu X., Zhou J., Gou Y. et al. A study on raise blasting and blast-induced vibrations in highly stressed rock masses. Tunnelling and Underground Space Technology. 2022. Vol. 123. ID. 104407.

Full content Improving efficiency of rock breaking using pre-weakening of rock mass
Back