Журналы →  Tsvetnye Metally →  2020 →  №3 →  Назад

METAL PROCESSING
Название Commercial production of foil made of the GFE-1 grade hafnium
DOI 10.17580/tsm.2020.03.14
Автор Negodin D. A., Kharkovskiy D. N., Dudikhin D. V.
Информация об авторе

Chepetsky Mechanical Plant JSC, Glazov, Russia:
D. A. Negodin, Chief Engineer of the Titanium Project, Non-Nuclear Business Development Group, e-mail: DmANegodin@Rosatom.ru
D. N. Kharkovskiy, Research Engineer
D. V. Dudikhin, Process Engineer

Реферат

Hafnium possesses a unique complex of physical and chemical properties (high melting point, high corrosion resistance, enhanced structural behaviour not affecting the material ductility) that allow application of hafnium-based products in various industries. Hafnium is used mainly in nuclear power engineering, though it has also found application in production of heavy-duty batteries and permanent magnets, in release of mirror materials, integrated circuits and electronic devices. The only hafnium-producing enterprise in Russia is Chepetsky Mechanical Plant, SC (CMP, SC). By now, CMP, SC has mastered pilot scheme of production of metallic hafnium containing totally at least 99.8 wt % of zirconium and hafnium (Zr < 1 wt %), the ingots weighing up to 1 ton. The ingots are processed into the products for nuclear power engineering – flat stock and tubes. To expand the range of products, the efforts were made to master production of hafnium foil for radio engineering industry. The pilot batches of 0.10–0.30 mm thick foil were produced. The article provides comparative analysis of chemical composition of various hafnium grades and actual chemical composition of CMP, SC’s reported ingots. The foil manufacturing scheme with alternation of principal strain direction in cold rolling is described which ensures high uniformity of the material. Dependence of the hafnium foil’s mechanical properties on finish annealing modes is analyzed. It is shown that structural behaviour (tensile strength and yield strength) decreases, and ductility (percentage elongation) increases with increase of heat treatment temperature up to 950 oC. The results are provided of investigating the foil structural condition at various heat treatment modes. It is found that foil sheets’ microhardness decreases upon completion of heat treatment. Based on the study results, it is established that the hafnium foil production scheme developed by CMP, SC ensures isotropy of the properties.

Ключевые слова Metallic hafnium, cold rolling, vacuum annealing, hafnium foil, microstructure, microhardness, mechanical properties, isotropic properties
Библиографический список

1. Negodin D. A., Shtutsa M. G., Akhtonov S. G. et al. Commercial production of hafnium and products with hafnium. Voprosy atomnoy nauki i tekhniki. 2012. No. 2. pp. 97–101.
2. Negodin D. A., Shtutsa M. G., Ilenko E. V., Koparulina E. S., Aleksandrov A. V. Hafnium, manufactured at “Chepetsky mechanical plant” JSC, is a nuclear power industry material. Tsvetnye Metally. 2014. No. 1. pp. 59–62.
3. Strasser A., Hollow S. Control Assembly Technology Report. FMTP Volume III. Advanced Nuclear Technology International. June, 2014. 44 p.
4. Jones III J. V., Piatak N. M., Bedinger G. M. Zirconium and Hafnium. Critical Mineral Resources of the United States — Economic and Environmental Geology and Prospects for Future Supply. Chapter V. U.S. Geological Survey, Reston, Virginia. 2017. 38 p.
5. Sheka I. A., Karlysheva K. F. The chemistry of hafnium. Kiev : Naukova dumka, 1972. 454 p.
6. Hedrick J. B. Zirconium and Hafnium. U.S. Geological Survey Minerals Yearbook, 2001. pp. 86.1–86.10.
7. Abdelkareem A. New Extraction Technique of Zirconium and Hafnium from Zircon Mineral. Arab Journal of Nuclear Sciences and Applications. 2019. Vol. 52, Iss. 2. pp. 201–208.
8. Berdonosov S. S. Hafnium. Encyclopedia of Physics: In 5 volumes. Ed. by A. M. Prokhorov. Moscow : Sovetskaya entsiklopediya, 1988. Vol. 1: Aaronova – Long lines. 707 p.
9. Afonskiy A. A., Diakonov V. P. Electronic measurements in nanotechnology and microelectronics. Ed. by professor V. P. Diakonov. Moscow : DMK Press, 2011. 688 p.
10. Hviid R. Hafnium Oxide Upgrades pH Sensing InAs Nanowire FET Devices. Nano-Science Center University of Copenhagen. 2010. 64 p.
11. Uller J. M., Polakowski P., Mueller S., Mikolajickb T. Ferroelectric Hafnium Oxide Based Materials and Devices: Assessment of Current Status and Future Prospects. ECS Journal of Solid State Science and Technology. 2015. Vol. 4, Iss. 5. pp. 30–35.
12. Tao Li, Hong Bo, Huawei Cao, Yanqing Lai, Yexiang Liu. Carbon-coated Aluminum Foil as Current Collector for Improving the Performance of Lithium Sulfur Batteries. International Journal of Electrochemical Science. 2017. Vol. 12, Iss. 5. pp. 3099–3108.
13. Shikov A. K., Bocharov O. V., Arzhakova V. M., Bezumov V. N., Perlovich Yu. A. et al. Application of hafnium for nuclear reactor control elements and power plants. Metallovedenie i termicheskaya obrabotka metallov. 2003. No. 8. pp. 20–23.
14. Shikov A., Bocharov O., Arzhakova V., Bezumov V., Perlovich Yu. Establishing in-country hafnium production facilities. Understanding its properties, structure and texture and how they change during melting, forming and heat treatment. Natsionalnaya metallurgiya. 2002. No. 6. pp. 77–84.
15. Kotsar M. L., Morenko O. G., Shtutsa M. G., Akhtonov S. G., Aleksandrov A. V. et al. Production of high-purity titanium, zirconium and hafnium on an iodide refining line. Neorganicheskie materialy. 2010. Vol. 46, No. 3. pp. 332–340.
16. Kotsar M. L., Lavrikov S. A., Nikonov V. I., Aleksandrov A. V., Akhtonov S. G. High-purity titanium, zirconium and hafnium in nuclear industry. Atomnaya energiya. 2010. Vol. 111, No. 2. pp. 72–77.
17. TU 001.402–2008 Hafnium metal in ingots.
18. TU 001.423–2010 Hafnium metal ingots.
19. GOST 22517–77. Hafnium-iodide metal. Technical requirements (incl. Revisions 1, 2). Introduced: 01.01.1979.
20. ASTM B 776. Standard Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate.
21. ASTM B 737. Standard Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire.
22. TU 48-4.501–88 Hafnium strips. Specifications.
23. TU 48-19-447–88 Foil and hafnium strips.
24. Kotsar M. L., Lavrikov S. A., Lapidus A. O. et al. Hafnium iodide. Production, composition, properties and application for materials used in nuclear reactor control elements. Voprosy atomnoy nauki i tekhniki. Seriya: Fizika radiatsionnykh povrezhdeniy i radiatsionnoe materialovedenie. 2014. Iss. 103, No. 2. pp. 78–84.
25. Neklyudov I. M., Azhazha V. M., Kovtun K. V. et al. Preproduction planning for structural materials made of hafnium. Nauka i innovatsii. 2009. Vol. 5, No. 2. pp. 23–31.
26. The metallurgy of hafnium. Ed. by D. E. Thomas, E. T. Hayes. Moscow : Metallurgiya, 1967. 308 p.
27. Risovanyi V. D., Zakharov A. V., Muraleva E. M. New advanced materials for thermal-neutron reactors. Voprosy atomnoy nauki i tekhniki. Seriya: Fizika radiatsionnykh povrezhdeniy i radiatsionnoe materialovedenie. 2005. No. 3. pp. 87–93.

28. GOST 10510–80. Erikson test method for sheets and strips extrusion. Introduced: 01.07.1980.

Language of full-text русский
Полный текст статьи Получить
Назад