Journals →  Gornyi Zhurnal →  2020 →  #1 →  Back

THEORETICAL ISSUES OF GEOMECHANICS
ArticleName Geomechanical model of underground mine. Part I. Creation
DOI 10.17580/gzh.2020.01.08
ArticleAuthor Biryuchev I. V., Makarov A. B., Usov A. A.
ArticleAuthorData

SRK Consulting, Moscow, Russia:

I. V. Biryuchev, Senior Consultant for Geomechanics, ibiryuchiov@srk.ru.com
A. B. Makarov, Chief Consultant for Geomechanics, Professor, Doctor of Engineering Sciences

 

Russdragmet, Moscow, Russia:

A. A. Usov, Leading Mining Engineering

Abstract

The article describes stages of geomechanical modeling of a mine. The geomechanical model is based on the frame model of the structural geology of a deposit. The latter model is created by integration of information acquired at different stages of the deposit exploration and operation: data bases on exploration coring, geological plans and profiles. Aiming to fill the blocky structural geology model with geomechanical information, the program of data acquisition on jointing and properties of ore and enclosing rocks was implemented. The program involved determination of jointing density from the core material and orientation of the joint systems from scanning of the rock mechanics survey borehole walls. Additional data were obtained from jointing surveys in mine workings. It is shown that different tools and technologies of the initial structural data acquisition for the geomechanical model complement one the other. The statistical laws of distribution of the joint length and spacing are obtained. The collected structural data are used to calculate the rock mass quality index by N. Barton. It is found that the calculated Q-indexes agree with the standard rock mass stability categories in the Russian mining practice. The blocky geomechanical model is created by interpolation of Q-index within the limits of identified geomechanical domains. The interpolation was accomplished by the method of radial basic functions using a structural trend with direction governed by the morphology of geological bodies composing the rock mass. The resultant rock mass quality index was calculated from the standard indicator estimation procedure. In order to check the interpolation validity in the blocky model, the actual geomechanical data obtained per intervals in boreholes were compared with the relevant interpolated values, and the average initial data were matched with the interpolated values in different directions. Using the created blocky geomechanical model, zoning of the Novo-Shirokino mine field was carried out by the stability categories based on the rock mass quality index.

keywords Deposit, structural geology model, geomechanical data, structural data, rock mass quality, estimation, geomechanical block model, stability categories, mine field, zoning
References

1. Read J., Stacey P. Guidelines for open pit slope design. Australia : CSIRО, 2009. 496 p.
2. Livinskiy I. S., Mitrofanov A. F., Makarov A. B. Complex geomechanical modeling: structure, geology, reasonable sufficiency. Gornyi Zhurnal. 2017. No. 8. pp. 51–55. DOI: 10.17580/gzh.2017.08.09
3. Laubscher D., Guest A., Jakubec J. Guidelines on Caving Mining Methods : The Underlying Concepts. Queensland : The University of Queensland, 2017. 282 p.
4. Zhirnov A. A., Shaposhnik Yu. N., Nikolsky A. M., Neverov S. A. Geomechanical assessment and substantiation of mining conditions and mining method for Irtysh deposit. Gornyi Zhurnal. 2018. No. 1. pp. 48–53. DOI: 10.17580/gzh.2018.01.08
5. Zhirnov A. A., Abdrakhmanov S. U., Shaposhnik Yu. N., Konurin A. I. Rock mass stability estimation and selection of mine support design at Orlov complex ore deposit. Gornyi Zhurnal. 2018. No. 3. pp. 51–57. DOI: 10.17580/gzh.2018.03.08
6. Stacey T. R. Rock engineering design – the importance of process, prediction of behaviour, choice of design criteria, review and consideration of risk. Proceedings of the International Seminar on Design Methods in Underground Mining. Perth : Australian Centre for Geomechanics, 2015. pp. 57–76.
7. Hudson J. A., Harrison J. P. Engineering rock mechanics. An introduction to the principles. Amsterdam : Elsevier Science, 2000. 456 p.
8. Terzaghi R. Sources of Error in Joint Surveys. Géotechnique. 1965. Vol. 15, Iss. 3. pp. 287–304.
9. Using the Q-System. Rock mass classification and support design : Handbook. Oslo, 2015. 54 p.
10. Gutenberg B., Richter C. F. Frequency of Earthquakes in California. Bulletin of the Seismological Society of America. 1944. Vol. 34. pp. 185–188.
11. Sadovskiy M. A., Pisarenko V. F. Similarity in geophysics. Priroda. 1991. No. 1. pp. 13–23.
12. Hutchinson D. J., Diederichs M. S. Cablebolting in Underground Mines. Richmond : BiTech Publishers Ltd., 1996. 406 р.
13. McInerney P., Goldberg A., Calcagno P., Courrioux G., Guillen R., Seikel R. Improved 3D Geology Modelling Using an Implicit Function Interpolator and Forward Modelling of Potential Field Data. Proceedings of Exploration 07: The Fifth Decennial International Conference on Mineral Exploration. Toronto, 2007. pp. 919–922.
14. Stewart M., de Lacey J., Hodkiewicz P. F., Lane R. Grade Estimation from Radial Basis Functions – How Does it Compare with Conventional Geostatistical Estimation? Ninth International Mining Geology Conference. Adelaide, 2014.
15. Knight R. H., Lane R. G., Ross H. J., Abraham A. P. G., Cowan J. Implicit Ore Delineation. Proceedings of Exploration 07: Fifth Decennial International Conference on Mineral Exploration. Toronto, 2007. pp. 1165–1169.
16. Operational regulations for nonferrous, rare and precious metal mines and placers. Moscow : Nedra, 1981. 109 p.
17. Eremenko V. A., Ainbinder I. I., Marysyuk V. P., Nagovitsyn Yu. N. Guidelines for selecting ground support system for the Talnakh operations based on the rock mass quality assessment. Gornyi Zhurnal. 2018. No. 10. pp. 101–106. DOI: 10.17580/gzh.2018.10.18
18. Andrews P. G. Ground support selection rationale: a Gold Fields perspective. Proceedings of the Ninth International Symposium on Ground Support in Mining and Underground Construction. Perth : Australian Centre for Geomechanics, 2019. pp. 15–28.

Language of full-text russian
Full content Buy
Back