Журналы →  Non-ferrous Мetals →  2018 →  №2 →  Назад

MATERIAL SCIENCE
Название Analysis of the phase composition and the structure of aluminum alloys with increased content of impurities
DOI 10.17580/nfm.2018.02.07
Автор Mansurov Yu. N., Rakhmonov J. U.
Информация об авторе

Ministry of Innovation Development of the Republic Uzbekistan, Tashkent, Uzbekistan:

Yu. N. Mansurov, Professor, Deputy Minister, e-mail: yulbarsmans@gmail.com

 

University of Quebec at Chicoutimi, Canada:
J. U. Rakhmonov, PhD, Research Fellow, e-mail: jovid.rakhmonov@googlemail.com

Реферат

The development of fundamental knowledge that allows making proper correlation among the chemical composition, structure and properties of non-ferrous alloys is a priority task for the metallurgy of nonferrous metals and alloys, as this knowledge makes the main contribution to the development of this subject and is a powerful tool for expanding the areas of their application. A variant of the establishment of regularities in metal science is the study of phase equilibria, transformations in the temperature range and compositions of metallic systems. In the scientific literature there is a lot of information on the results of studies of two- and three-component alloys in order to construct equilibrium phase diagrams. However, the non-equilibrium crystallization of alloys, and thus, the non-equilibrium phase diagrams are of greater practical interest from the point of view of industrial production. Taking into account that the compositions of industrial alloys, as a rule, are multi-component, it can be stated that there is no reliable information on multi-component systems in the literature. Industry is interested in the possibility of using alloys with low cost, however, with high performance properties, which is possible in the case of using chemical elements of technical purity, industrial waste or scrap for their preparation. First of all, it concerns aluminum alloys, as the volume of their consumption is the highest among alloys of non-ferrous metals. In addition, the number of applications made of these alloys is continuously growing. The purpose of this paper is to perform a comparative analysis of the non-equilibrium phase diagrams of aluminum-based alloys with an increased content of impurities in comparison with their equilibrium counterparts known from the published scientific literature. In the process of work, equilibrium and non-equilibrium phase diagrams of aluminum with basic alloying elements and the most frequent harmful impurities are constructed.

This work was supported by Task No. 11.2072.2017 / 4.6 for the implementation of the project on the theme “Development of technology for obtaining deformed semi-finished products from alumo-matrix eutectic composites reinforced with L12 nanoparticles without hardening”.

Ключевые слова Aluminum alloys, impurities, structure, phase transformations, phase diagrams, isothermal and polythermal cross sections
Библиографический список

1. Mansurov Yu. N., Kurbatkina E. I., Buravlev I. Yu., Reva V. P. Features of structure’s formation and properties of composite aluminum alloy ingots. Non-ferrous Metals. 2015. No. 2. pp. 40–47. DOI: 10.17580/nfm.2015.02.08
2. Mondolfo L. F. Structure and properties of alloys: Translated from English. Moscow : Metallurgiya, 1979. 640 p.
3. Otarvanna S., Gourlay C. M., Laukli H. I., Dahle A. K. Microctructure Formation in AlSi4MgMn and AlMg5Si2Mn High-Pressure Die Castings. Metallurgical and Materials Transactions A. 2009. Vol. 40A, No. 6. pp. 1645–1659.
4. Mansurov Yu. N., Reva V. P., Mansurov S. Yu., Beloborodov M. V. Economic and social basis of material science development in the Far East. Tsvetnye Metally. 2016. No. 11. pp. 88–93. DOI: 10.17580/tsm.2016.11.09
5. Mansurov Yu. N., Belov N. A., Sannikov A. V., Buravlev I. Yu. Optimization of composition and properties of heatresistant complex-alloyed aluminum alloy castings. Non-ferrous Metals. 2015. No. 2. pp. 48–55. DOI: 10.17580/nfm.2015.02.09
6. Mansurov Yu. N., Aksenov A. A., Reva V. P. Influence of the chill-mold casting process on the structure and properties of aluminum alloys with eutectic constituents. Tsvetnye Metally. No. 5. 2018. pp. 77–81. DOI: 10.17580/tsm.2018.05.11
7. Aksenov A. A., Mansurov Yu. N., Ivanov D. O., Kadyrova D. S. Foam aluminium for small business in the Far East. Tsvetnye Metally. 2017. No. 4. pp. 81–85. DOI: 10.17580/tsm.2017.04.12
8. Belov N. A. Ternary and quaternary phase diagrams (textbook for high schools). Moscow : MISiS, 2007. 360 p.
9. Zolotorevskiy V. S., Belov N. A., Glazoff M. V. Casting Aluminum Alloys. Elsevier. 2007. 544 p.
10. Belov N. A. Phase composition of aluminum alloys. Moscow : Izdatelskiy Dom MISiS, 2009. 392 p.
11. Belov N. A., Gusev A. Yu., Eskin D. G. Evaluation of Five-Component Phase Diagrams for the Analysis of Phase Composition in Al – Si Alloys. Z. Metallkde. 1998. Vol. 89, No. 9. pp. 618–622.
12. Belov N. A., Koltsov A. V., Eskin D. G. The Al – Cu – Fe – Mg – Si Phase Diagram in the Range of Al – Cu Alloys. Proc. 8th Int. Conf. on Al-Alloys and Their Physical and Mechanical Properties (ICAA8), 1-5.07.2002. Cambridge, UK, Materials Science Forum. Vol. 396–402, Part 2. pp. 929–934.
13. Aksenov A. A., Samoshina M. E., Belov N. A. Structure and properties of mechanically alloyed composite materials from scrap of Al alloys. Proc. ICAA10, Vancouver, 9–14 July 2006. Trans Tech. Publications. Ueticon-Zuerich. 2006. pp. 1305–1310.
14. Turchin A. N., Eskin D. G., Pool J., Belov N. A., Katgerman L.Solute transport and phase composition in an Al – Mg – Si alloy solidified under conditions of forced flow. Int. J. Mat. Res. 2008. Vol. 99. pp. 26–35.
15. Belov N. A., Belov V. D., Alabin A. N., Mishurov S. S. Sparingly alloyed aluminium alloys of new generation. Metallurgist. 2010. pp. 311–316.
16. Emelina N. B., Alabin A. N., Belov N. A. Influence of Bismuth and Lead on the Formation of the Structure of Experimental Alloys with a Cu – 30% Zn-Based Composition during Crystallization, Deformation, and Thermal Treatment. Russian Journal of Non-Ferrous Metals. 2010. Vol. 51, No. 6. pp. 476–482.
17. Padalko A. G., Belov N. A., Veselov A. N., Talanova G. V. Thermography of the Phase Transformationsin a Hypoeutectic Al – 7% Si – 0.5% Mg Silumin at High Pressures and Temperatures. Russian Metallurgy (Metally). 2009. No. 1. pp. 65–69.
18. Belov N. A. Phase composition of industrial and perspective aluminum alloys. Moscow: Izdatelskiy Dom MISiS, 2010. 511 p.

Полный текст статьи Analysis of the phase composition and the structure of aluminum alloys with increased content of impurities
Назад