Journals →  Tsvetnye Metally →  2018 →  #7 →  Back

METAL PROCESSING
ArticleName Substantiation of a manufacturing technology of flat rolled products from Al – Mg – Sc based alloys for the aerospace industry
DOI 10.17580/tsm.2018.07.12
ArticleAuthor Yashin V. V., Aryshenskiy V. Yu., Latushkin I. A., Tepterev M. S.
ArticleAuthorData

JSC Arkonik SMZ, Samara, Russia:

V. V. Yashin, Manager
V. Yu. Aryshenskiy, Chief Metall Rolling Specialist
I. A. Latushkin, Leading Specialist, e-mail: ilya.latushkin@arconic.com
M. S. Tepterev, Leading Process Engineer

Abstract

The manufacturing technology of flat rolled products from Al – Mg – Sc based alloys with an optimal combination of mechanical properties has been developed. The work was carried out on 01570 alloy. The ingot was cast into an industrial slip mold and processed on industrial equipment of the Arkonik SMZ metallurgical plant, Samara. In this work, the homogenization regime and the interval of hot rolling temperatures have been specified, together with the recommendations on both hot and cold rolling modes. The hot rolling modes were developed considering the 01570 alloy rheological properties studied at temperatures of 350 and 400 оC and deformation rates corresponding to those normally used for commercial rolling (0.1, 1 and 40 s–1). The results are presented graphically and recorded in an analytical form using the Sellars formula. At each stage of production, the microstructure and mechanical properties of the semi-finished products were studied. It is shown that in the state of delivery of H116 (cold-deformed metal with a degree of deformation of 12%), the plasticity indices are in the same interval (9–14%) as for the less durable AMg6 alloy. Based on the values of the specific strength calculations, it is shown that the replacement of semifinished products from AMg6 alloy to 01570 alloy allows to reduce the product weight by 49.8–66%.

keywords Aluminum alloys, scandium microalloying, rolling technology, mechanical properties, plates and sheets, secondary phases, recrystallization, cold work, Glyble installation, finite element modeling
References

1. Zakharov V. V. On the joint alloying of aluminum alloys by scandium and zirconium. Metallovedenie i termicheskaya obrabotka metallov. 2014. No. 6. pp. 3–8.
2. Bronz A. V., Efremov V. I., Plotnikov A. D., Chernyavskiy A. G. Alloy 1570C – material for hermetic structures of the perspective reusable products of RSC Energia. Kosmicheskaya tekhnika i tekhnologii. 2014. No. 4 (7). pp. 62–67.
3. Avtokratova E. V. Prospective Al – Mg – Sc alloy for aircraft construction. Vestnik Ufimskogo gosudarstvennogo aviatsionnogo tekhnicheskogo universiteta. 2007. Vol. 9, No. 1.
4. Filatov Yu. A., Plotnikov A. D. Structure and properties of deformed semifinished products from aluminum alloy 01570C of the Al – Mg – Sc system for the RKK "Energia" product. Tekhnologiya legkikh splavov. 2011. No. 2. pp. 15–26.
5. Aryshenskiy E. V., Grechnikova A. F., Yashin V. V., Tepterev M. S. Influence of microalloying of the aluminum-magnesium system alloys by rare-earth and transition metals on the evolution of the structure under thermomechanical treatment. Proizvodstvo prokata. 2017. No. 4. pp. 4–11.
6. Booth-Morrison C., Dunand D. C., Seidman D. N. Coarsening resistance at 400 oC of precipitation-strengthened Al – Zr – Sc – Er alloys. Acta Materialia. 2011. Vol. 59, Iss. 18. pp. 7029–7042.
7. Royset J., Ryum N. Kinetics and mechanisms of precipitation in an Al – 0.2 wt.% Sc alloy. Materials Science and Engineering: A. 2005. Vol. 396, Iss. 1-2. pp. 409–422.
8. Knipling K. E., Karnesky R. A., Lee C. P., Dunand D. C., Seidman D. N. Precipitation evolution in Al – 0.1 Sc, Al – 0.1 Zr and Al – 0.1 Sc – 0.1 Zr (at.%) alloys during isochronal aging. Acta Materialia. 2010. Vol. 58, Iss. 15. pp. 5184–5195.
9. Yashin V. V., Aryshenskiy E. V., Kawalla R. F., Serebryany V. N., Rushchits S. V. Investigation of stressed state conditions and thermomechanical parameters on the structure and structure of evolution in 1565ph aluminium alloy. IOP Conference. Series: Materials Science and Engineering. 2016. Vol. 156. No. 1. pp. 012012.
10. Rushchits S. V., Aryshenskiy E., Kawalla R., Serebryany V. Investigation of the texture structure and mechanical properties evolution during the hot deformation of 1565 aluminum alloy. Materials Science Forum. 2016. Vol. 854. pp. 73–78.
11. Zakharov V. V., Rostova T. D. The influence of scandium, transition metals and impurities on the hardening of aluminum alloys during the decompositionof a solid solution. Metallovedenie i termicheskaya obrabotka metallov. 2007. No. 9 (627). pp. 12–19.
12. Yashin V. V., Aryshenskiy E. V., Kolbasnikov N. G., Tepterev M. S., Latushkin I. A. Influence of microalloying by transition and rare-earth metals of the aluminum-magnesium system on mechanical properties in thermomechanical processing. Proizvodstvo prokata. 2017. No. 8. pp. 42–48.
13. Grudev A. P. The theory of rolling. 2nd edition. Moscow : Intermet Inzhiniring, 2001. 280 p.
14. Yashin V. V. et al. Development of a Mathematical Model of Plate Rolling on Hot Reversing Mills. Key Engineering Materials. 2017. Vol. 746. pp. 48–55.
15. Rushchits S. V. et al. Modeling the hot deformation behavior of 1565ch aluminum alloy. Key Engineering Materials. 2016. Vol. 684. pp. 35–41.
16. Kolobov V. G. Development of thermomechanical modes for rolling thin aluminum tapes with a rational for punching complex of mechanical properties and anisotropy. Dissertation of Candidate of Technical Sciences. Samara, 2013. 144 p.

Language of full-text russian
Full content Buy
Back