Journals →  Tsvetnye Metally →  2017 →  #12 →  Back

COMPOSITES AND MULTIPURPOSE COATINGS
ArticleName Formation of composite coatings by plasma electrolytic oxidation using telomeric solution in pentafluorchlorbenzene
DOI 10.17580/tsm.2017.12.08
ArticleAuthor Gnedenkov S. V., Sinebryukhov S. L., Mashtalyar D. V., Nadaraia K. V.
ArticleAuthorData

Institute of Chemistry of Far Eastern Branch of RAS, Vladivostok, Russia:

S. V. Gnedenkov, Professor, Deputy Director on Science, Head of Department of Electrochemical Systems and Surface Modification Processes, e-mail: svg21@hotmail.com
S. L. Sinebryukhov, Assistant Professor, Head of Laboratory of Unstationary Surface Processes, e-mail: sls@ich.dvo.ru
D. V. Mashtalyar, Senior Researcher of Laboratory of Biomedical Composite Coatings, e-mail: madiva@inbox.ru
K. V. Nadaraia, Junior Researcher of Laboratory of Unstationary Surface Processes, e-mail: nadaraiakv@mail.ru

Abstract

Nowadays, various methods of coatings formation are applied for protection of magnesium alloys from external destructive effects. A method of plasma electrolytic oxidation is developed actively and allows the increasing of anti-corrosion and mechanical characteristics of the treated alloy. It is widely spread in industry due to the results of scientific investigations in the world. Our study shows the results of investigations of electrochemical and mechanical properties and hydrophobicity of composite coating, formed on magnesium alloy MA8 using plasma electrolytic oxidation with further application of polymer on the formed alloy. The polymer is obtained from the telomeric solution of tetrafluoroethylene in pentafluorchlorbenzene. The formed composite coating leads to decrease of the corrosion current density and increase of polarization resistance by two or four orders (in comparison with the basic plasma electrolytic oxidation coating and material without coating, respectively). Extension tests for the samples with composite coating defined the positive influence of thermal impact on overload values under tension. This parameter is increased after the application of tetrafluoroethylene telomers and following thermal treatment. The obtained composite сoating allows have the hydrophobic properties: the contact angle, calculated using the Young-Laplace method for accounting of gravitation deformations of the droplet outline under its own mass was 145 degrees.
This study was carried out with the financial support of the Russian Science Foundation (grant 14-33-00009).

keywords Magnesium alloys, plasma electrolytic oxidation, telomeric solutions, composite coatings, corrosion, hydrophobic properties, fluoropolymers
References

1. Henry F., Renaux F., Coppee S., Lazzaroni R., Vandencasteele N., Reniers F., Snyders R. Synthesis of superhydrophobic PTFE-like thin films by selfnanostructuration in a hybrid plasma process. Surface Science. 2012. Vol. 606. pp. 1825–1829.
2. Martini C., Ceschini L., Tartertini F., Paillard J. M., Curran J. A. PEO layers obtained from mixed aluminate-phosphate baths on Ti – 6Al – 4V: Dry sliding behaviour and influence of a PTFE topcoat. Wear. 2010. Vol. 269. pp. 747–756.
3. Zhang D. Y., Dong G. N., Chen Y. J., Zeng Q. F. Electrophoretic deposition of PTFE particles on porous anodic aluminum oxide film and its tribological properties. Applied Surface Science. 2014. Vol. 290. pp. 466–474.
4. Gnedenkov S. V., Sinebryukhov S. L., Mashtalyar D. V., Nadaraia K. V., Kiryukhin D. P., Buznik V. M., Kichigina G. A., Kushch P. P. Composite coatings formed by plasma electrolytic oxidation and using telomeric tetrafluoroethylene solutions. Russian Journal of Inorganic Chemistry. 2015. Vol. 60, No. 8. pp. 975–986.
5. Arrabal R., Matykina E., Viejo F., Skeldon P., Thompson G. E. Corrosion resistance of WE43 and AZ91D magnesium alloys with phosphate PEO coatings. Corrosion Science. 2008. Vol. 50. pp. 1744–1752.
6. Cui S. H., Han J. M., Du Y. P., Li W. J. Corrosion resistance and wear resistance of plasma electrolytic oxidation coatings on metal matrix composites. Surface and Coatings Technology. 2007. Vol. 201. pp. 5306–5309.
7. Cheng Y. L., Wu F., Matykina E., Skeldon P., Thompson G. E. The influences of microdischarge types and silicate on the morphologies and phase compositions of plasma electrolytic oxidation coatings on Zircaloy-2. Corrosion Science. 2012. Vol. 59. pp. 307–315.
8. Yagi S., Kuwabara K., Fukuta Y., Kubota K., Matsubara E. Formation of self-repairing anodized film on ACM522 magnesium alloy by plasma electrolytic oxidation. Corrosion Science. 2013. Vol. 73. pp. 188–195.
9. Gnedenkov S. V., Sinebryukhov S. L., Mashtalyar D. V., Nadaraia K. V., Gnedenkov A. S., Bouznik V. M. Composite fluoropolymer coatings on the MA8 magnesium alloy surface. Corrosion Science. 2016. Vol. 111. pp. 175–185.
10. Wang Z. J., Wu L. N., Qi Y. L., Cai W., Jiang Z. H. Self-lubricating Al2O3/PTFE composite coating formation on surface of aluminium alloy. Surface and Coatings Technology. 2010. Vol. 204. pp. 3315–3318.
11. Li S. M., Zhu M. Q., Liu J. H., Yu M., Wu L., Zhang J. D., Liang H. X. Enhanced tribological behavior of anodic films containing SiC and PTFE nanoparticles on Ti6Al4V alloy. Applied Surface Science. 2014. Vol. 316. pp. 28–35.
12. Mori Y., Koshi A., Liao J., Asoh H., Ono S. Characteristics and corrosion resistance of plasma electrolytic oxidation coatings on AZ31B Mg alloy formed in phosphate – silicate mixture electrolytes. Corrosion Science. 2014. Vol. 88. pp. 254–262.
13. Sah S. P., Tsuji E., Aoki Y., Habazaki H. Cathodic pulse breakdown of anodic films on aluminium in alkaline silicate electrolyte — Understanding the role of cathodic half-cycle in AC plasma electrolytic oxidation. Corrosion Science. 2012. Vol. 55. pp. 90–96.
14. Gnedenkov S. V., Khrisanfova O. A., Zavidnaya A. G., Sinebryukhov S. L., Egorkin V. S., Nistratova M. V., Yerokhin A., Matthews A. PEO coatings obtained on an Mg–Mn type alloy under unipolar and bipolar modes in silicate-containing electrolytes. Surface and Coatings Technology. 2010. Vol. 204. pp. 2316–2322.
15. Kichigina G. A., Kushch P. P., Kiryukhin D. P. Radiation-chemical synthesis of tetrafluoroethylene telomers in chloropentafluorobenzene and perfluoroxylene. Khimiya vysokikh energiy. 2013. Vol. 47, No. 1. pp. 34– 38.
16. Li D., Neumann A. W. Contact angles on hydrophobic solid surfaces and their interpretation. Journal of Colloid and Interface Science. 1992. Vol. 148. pp. 190–200.
17. Kiryukhin D. P., Kichigina G. A., Kushch P. P., Kuryavyy V. G., Buznik V. M. Radiation chemical synthesis and properties of tetrafluoroethylene telomeres in fluorinecontaining solvents. Izvestiya Akademii nauk. Seriya khimicheskaya. 2013. No. 7. pp. 1–7.
18. Gnedenkov S. V., Egorkin V. S., Sinebryukhov S. L., Vyaliy I. E., Pashinin A. S., Emelyanenko A. M., Boinovich L. B. Formation and electrochemical properties of the superhydrophobic nanocomposite coating on PEO pretreated Mg–Mn–Ce magnesium alloy. Surface and Coating Technology. 2013. Vol. 232. pp. 240–246.

Language of full-text russian
Full content Buy
Back