Journals →  Tsvetnye Metally →  2017 →  #10 →  Back

BENEFICATION
ArticleName Investigation of the material composition of Udokan copper deposit ores using the modern methods of process mineralogy
DOI 10.17580/tsm.2017.10.03
ArticleAuthor Senchenko A. E., Kulikov Yu. V., Kurchevskaya E. M.
ArticleAuthorData

Science-research and design Institute “TOMS” LLC, Irkutsk, Russia
A. E. Senchenko, General Director, e-mail: senchenko@tomsmineral.ru
Yu. V. Kulikov, Chief Technologist
E. M. Kurchevskaya, Senior Researcher

Abstract

Our paper shows the results of complex mineralogical investigation of a copper ore sample from Udokan deposit for finding the copper occurrence forms, association of copper minerals and degree of their liberation. A key aspect of design of a flowsheet for ore processing is a comprehensive investigation of its material composition. Knowledge of occurrence forms of a valuable component, its interaction with ore components and gangue allows to choose the most rational flowsheet of ore processing still on the stage of the choice of the prospective investigation ways. This approach is the most important when investigating the complex Udokan deposit ores. In spite of the relatively simple chemical composition, the considerable variation of copper occurrence forms is typical of this deposit. That’s why the choice of optimal processing flowsheet is impossible without understanding of all nuances and features of mineral composition of Udokan deposit ores. Results from investigation of Udokan deposit ores using modern methods of process mineralogy allowed us to set a range of important mineralogical and process ore characteristics and copper occurrence forms. The obtained data prove the reasonability of selection of a universal combined flotation-metallurgical flowsheet of ore processing with generation of bulk concentrate, its atmospheric leaching and following recovery of copper-rich sulfide concentrate from the leaching cake. A level of irretrievable processing losses of copper due to the mineralogical peculiarities of Udokan deposit ores is acceptable for the chosen technology.

keywords Udokan copper deposit, sulfide copper minerals, oxidized copper minerals, chalcocite, bornite, brochantite, malachite, mineral composition
References

1. A project “Udokan”. Baikal mining company. Available at: https://www.bgk-udokan.ru/deposit
2. A project of organization of taking the semi-industrial technical sample of copper ores within the geological-economic and technological investigation of Udokan deposit (“Mednyy” site). JSC “Sosnovgeo”, 2012.
3. Sekisov A. G., Lavrov A. Yu., Zykov N. V. Substantiation of reasonability of combined mining of Udokan deposit. Ratsionalnoe osvoenie nedr. 2013. No. 3–4. pp. 86–92.

4. Technological investigations of Udokan deposit ore samples for research of SAG and fine grinding processes in HPGR/roller-press. Irkutsk : Institut TOMS, 2014.
5. Report “About the results of analysis of the background state of environment on the territory of Udokan deposit (Kalarsky District, Zabaykalsky Krai)”. Chita : Institut prirodnykh resursov, ekologii i kriologii Sibirskogo otdeleniya RAN, 2011.
6. Report “Analysis of geological materials of Udokan copper deposit, assessment of their correspondence to the modern requirements of legislative and procedural base of the state reserves examination. Moscow : LLC “Inform”, 2012.
7. Epova E. S. Geoecological aspects of behavior of chemical elements in the conditions of cryogenic oxidation zone on the example of Udokan deposit (Eastern Zabaikalie) : Dissertation … of Candidate of Geological and Mineralogical Sciences. Chita, 2014. 129 p.
8. Mackay D. A. R., Simandl G. J., Ma W., Gravel J., Redfearn M. Indicator minerals in exploration for specialty metal deposits: A QEMSCAN® approach. Symposium on critical and strategic materials proceedings, November 13–14, 2015, Victoria, British Columbia.
9. Dufek M., Klepikov S. Quanta 200, 400, 600. FEI Company, 2004. 282 p.
10. Guidelines for application of the Classification of deposit reserves and forecast resources of solid minerals. Copper ores. Moscow, 2007. 39 p.
11. Taldykin S. I. Atlas of structures and textures of ores. Moscow : Gosgeoltekhizdat, 1954. 268 p.
12. Schlesinger M. E., King M. J., Sole K. C., Davenport W. G. Extractive metallurgy of copper. Oxford : Elsevier, 2011. 472 p.
13. Betekhtin A. G. Mineralogy. Moscow : Izdatelstvo geologicheskoy literatury, 1950. 956 p.
14. Izoitko V. M. Technological mineralogy and ore evaluation. Saint Petersburg : Nauka, 1997. 582 p.
15. Reed S. J. B. Electron Microprobe Analysis and Scanning Electron Microscopy in Geology. Moscow : Tekhnosfera, 2008. 232 p.

Language of full-text russian
Full content Buy
Back