Journals →  Tsvetnye Metally →  2017 →  #7 →  Back

LIGHT METALS AND CARBON MATERIALS
ArticleName Development of heat exchanging tool for recuperation of heat during aluminium production
DOI 10.17580/tsm.2017.07.09
ArticleAuthor Sysoev I. A., Kondratev V. V., Kolmogortsev I. V., Zimina T. I.
ArticleAuthorData

Irkutsk National Research Technical University, Irkutsk, Russia:

I. A. Sysoev, Leading Researcher, Investigation Technological Center in Physical and Technical Institute
V. V. Kondratev, Head of Investigation Technological Center in Physical and Technical Institute
I. V. Kolmogortsev, Programmer, Scientific-Education Center “Autodesk”
T. I. Zimina, Assistant of a Chair of Industrial Processes Management, e-mail: ziminati@istu.edu

Abstract

The technology for aluminium electrolysis is constantly being perfected in the sense of increasing the unity capacity of electrolysers. The world’s leading aluminium companies strive to use powerful electrolysers with baked anodes that work at current strengths higher than 300 kA, as their application enables a higher ecological and economical efficiency of new factories. Keeping the technology for electrolysis stable at an increased current strength requires an effective removal of heat from construction elements, including the removal with technological waste gases. It is reasonable to cool the electrolytic gases before cleaning if we are striving to lower the physical level of the cleaned gases, which also lowers the exploitation costs of gas cleaning installations. The article states the arguments in favour of electrolytic cooling of waste gases that are generated during the production of aluminium. It describes the advantages and disadvantages of different processes for cooling of technological gases. A mathematical model was developed in the application program package ANSYS, whilst constructive characteristics of an experimental shelland-tube heat exchanging apparatus are also presented. The future plan is to perform experimental-industrial testing of a heat exchanging apparatus for recuperation of heat energy of the gases that are generated during various exploitation regimes in conditions of the current production.

The investigations were carried out with the support of the Grant of President of Russian Federation МК-4752.2016.8.

keywords Aluminium, electrolyser, anode gases, temperature, cooling, gas flue, bag filter, modelling, heat exchanging apparatus, energy efficiency
References

1. Nozhko S. I., Turusov S. N., Nikitin V. I. Technological approach to the control of electrolyzer’s energetic mode. Tsvetnye Metally. 2006. No. 8. pp. 85–87.
2. Zelberg B. I., Ragozin L. V., Barantsev A. G., Yasevich O. I., Grigorev V. G., Baranov A. N., Kondratev V. V. Metallurgist’s reference book. Production of aluminium and aluminium-based alloys : reference book. Irkutsk : Izdatelstvo IrGTU, 2015. 764 p.
3. Available at: http://www.consultant.ru/document/cons_doc_LAW_34823/
4. Available at: http://www.consultant.ru/document/cons_doc_LAW_93978/
5. Anders Sørhuus, Geir Wedde, Ketil Rye, Gaute Nyland. Increased energy efficiency and reduced HF emissions with new heat exchanger. Light Metals. 2010. pp. 249–254.
6. Hussain Ali Al Qassab, Sayed Salah Aqeel Ali Mohd, Geir Wedde, Anders Sørhuus. Hex ex retrofit enables smelter capacity expansion. Light Metals. 2012. pp. 815–820.
7. Antoine de Gromard, Chin Lim, El Hani Bouhabila, Bernard Cloutie, Mathieu Frainais. Development on electrolytic cell gas cooling. Light Metals. 2014. pp. 623–628.
8. El Hani Bouhabila, Erling Næss, Victoria Kielland Einejord and Kolbeinn Kristjansson. An innovative compact heat exchanger solution for aluminum off-gas cooling and heat recovery. Light Metals. 2013. pp. 793–797.
9. Anders Sørhuus, Geir Wedde. Pot gas heat recovery and emission control. Light Metals. 2009. pp. 281-286.
10. El Hani Bouhabila, Bernard Cloutier, Thierry Malard, Philippe Martineau, Hugues Vendette. Electrolytic cell gas cooling upstream of treatment center. Light Metals. 2012. pp. 545–550.
11. Bonnier M., Massambi S., Jolas J.-M., Girault G., Demetriou V., Wheaton D. Development of a System Basedon Water Atomization to Decrease, Prior to Treatment, the Temperature of the Gas Emitted from Aluminum Cells. Light Metals. 2007. pp. 193–197.
12. Shakhray S. G., Nemchinova N. V., Kondratev V. V., Mazurenko V. V., Shcheglov E. L. Technical solutions for cooling of aluminum cells exhaust gases. Metallurg. 2016. No. 9. pp. 73–77.
13. Sørhuus A. K., Ose S., Nilsen B. M. Possible use of 25 mW thermal energy recovered from the potgas at Alba line 4. Light Мetals. 2015. pp. 631–636.
14. Shakhray S. G., Kondratev V. V., Belyanin A. V., Nikolaev V. N., Gron V. A. Cooling anode gases from aluminum electrolysis cell in the heat exchanger for alumina heating. Metallurg. 2015. No. 2. pp. 29–32.
15. Shakhray S. G., Skuratov A. P., Kondratev V. V., Ershov V. A., Karlina A. I. Justification of the possibility of heating alumina by aluminum electrolyzer anode gases warmth. Vestnik Irkutskogo gosudarstvennogo tekhnicheskogo universiteta. 2016. No. 3. pp. 131–138.
16. Kondratev V. V., Ershov V. A., Shakhray S. G., Ivanov N. A. Preliminary heating of calcined anode. Tsvetnye Metally. 2015. No. 1. pp. 54–56.
17. Kondratev V. V., Nikolaev V. N., Karlina A. I. Modeling and laboratory tests of high-efficiency heat exchanger with low statistical resistance. Sovremennye tekhnologii. Sistemnyy analiz. Modelirovanie. 2015. No. 2. pp. 80–83.
18. Kolesnikov A. V., Mironenko V. V., Cheslavskaya A. A., Shmakov A. K. Optimization of Technological Processes of Manufacturing Parts from Sheets by Virtual Technological Simulation Tools. Vestnik Irkutskogo gosudarstvennogo tekhnicheskogo universiteta. 2013. No. 12 (83). pp. 73–77.
19. Cheslavskaya A. A., Mironenko V. V., Kolesnikov A. V., Maksimenko N. V., Kotov V. V. Choice of rational forming method of a detail by means of engineering analysis with use of CAE-systems. Metallurg. 2014. No. 12. pp. 24–31.
20. Kondratev V., Govorkov A., Lavrenteva M., Sysoev I., Karlina A. I. Description of the heat exchanger unit construction, created in IRNITU. International Journal of Applied Engineering Research. 2016. Vol. 11, No. 19. pp. 9979–9983.

Language of full-text russian
Full content Buy
Back