Journals →  Tsvetnye Metally →  2017 →  #5 →  Back

METAL PROCESSING
ArticleName Prospects of usage of alloy 1565ch with new approach to aluminium alloys application in armor plating of light fighting machines
DOI 10.17580/tsm.2017.05.12
ArticleAuthor Artsruni A. A., Grigoryan V. A., Drits A. M.
ArticleAuthorData

Scientific and Research Institute “Stali”, Moscow, Russia:

A. A. Artsruni, Leading Researcher

 

Russian Academy of Rocket and Artillery Sciences, Moscow, Russia:
V. A. Grigoryan, Academician

 

Alcoa Samara, Samara, Russia:
A. M. Drits, Director on Development of Business and New Technologies, e-mail: Alexander.Drits@arconic.com

Abstract

For many years, aluminium alloys for armor plating of fighting machines have already been wildly applied in Russia and abroad. Having the equal weight, the hardness of these alloys is by almost three times higher than the one of steel. That's why, usage of these alloys allows the considerable weight decrease. Until recently, their high strength and durability have been the determining properties. This defined the application of welded aluminium alloys (Al – Zn – Mg system) and other treatment hardenable alloys as armor. However nowadays, because of application of combined armor plating systems, the role of aluminium alloys and their requirements is changed. That's why, a new cold-deformed welded alloy 1565ch is a prospective one for application in such complex protection systems. During the normal shooting, its indicators are lower than the ones of batch alloys, but is almost equal to them during the angle shooting and shooting with low-caliber projectiles. In combination with ceramic plates, being used as the basic protectory alloy, the alloy 1565ch showed its advantages before other existing alloys. It has no alternate during the improvement of light armored cars' protection systems. In comparison with existing alloys, armor protection, made of this alloy, is more survivable, more maintainable and more corrosion-resistant.

keywords Aluminium, armor, layer aluminium plates, 1565ch, weldability, mechanical properties, protection
References

1. Artsruni A. A., Tsurgozen L. A., Makhov B. F. Aluminium and armor protection problems. Collection “Urgent problems of protection and safety”. Proceedings of the 13-th All-Russian scientific and practical conference. Volume 3. Armor materiel and arming. Saint Petersburg : RARAN, 2010. pp. 95–102.
2. Gasqueres C., Nissbaum J. Ballistic performance and failure mode of high performance 2139-T8 and 7449-T6 aluminium alloys. 26th International Symposium on Ballistics. Miami, September 12–16, 2011. pp. 1289–1295.
3. Aluminum alloy armor rolled plate. Washington, 1992.
4. Ettore di Russo. Aluminium composite plate. International defense Review. 1988. No. 12. pp. 1657–1659.
5. New lightweight aluminum alloys quality to armor military vehicles. Defense Standardization Program Journal. 2012. pp. 10–15.
6. Drits A. M., Oryshchenko A. S., Grigoryan V. A. et al. Aluminium-based alloy and product, made of this alloy. Patent RF, No. 2431692. Applied: 18.06.2010. Published: 20.10.2011. Bulletin No. 29.
7. Oryshenko A. S., Osokin E. P., Barakhtina N. N., Drits A. M., Sosedkov S. M. Aluminum-magnesium alloy 1565ch (1565ч) for cryogenic application. Tsvetnye Metally. 2012. No. 11. pp. 84–90.
8. Rules of classification and building of crafts. Part XIII. Saint Petersburg : Rossiyskiy morskoy reestr sudokhodstva, 2017. 163 p.
9. Bulgakov A. A., Knoring S. D., Kryzhevich G. B., Shaposhnikov V. M. Fatigue strength of new Al – Mg alloys 1550M and 1565chM. Trudy Krylovskogo gosudarstvennogo tsentra. 2014. No. 82. pp. 113–120.
10. Pavlova V. I., Zykov S. A., Osokin E. P. Assessing the impact of structural and technological factors on properties of aluminum-magnesium welded joints at cryogenic temperature. Voprosy materialovedeniya. 2014. No. 2 (78). pp. 138–154.
11. Artsruni A. A., Grigoryan V. A., Yankov V. P., Drits A. M. Aluminium cold-hardened armor 1565ch. Voprosy oboronnoy tekhniki. Nauchnotekhni cheskiy sbornik “Tekhnologiya i perspektivy”. 2013. No. 3/4. pp. 3–5.
12. Konyukhov A. D., Drits A. M. Bodies of ferry cars made of aluminium alloys. Zheleznodorozhnyy transport. 2016. No. 2. pp. 67–70.
13. Railvolution. 2013. Vol. 13, No. 5. 62 p.
14. Drits A. M., Ovchinnikov V. V., Rastopchin R. N. Technological properties of sheets made of welded aluminium alloy 1565ch for tanks production. Tekhnologiya legkikh splavov. 2012. No. 3. pp. 20–29.

Language of full-text russian
Full content Buy
Back