Journals →  Tsvetnye Metally →  2017 →  #5 →  Back

BENEFICATION
ArticleName Power consumption for settled mud transfer to discharge sleeves in radial thickeners
DOI 10.17580/tsm.2017.05.01
ArticleAuthor Domanskiy I. V., Davydov I. V., Malofeev M. N.
ArticleAuthorData

Saint Petersburg State Institute of Technology, Saint Petersburg, Russia:

I. V. Domanskiy, Professor

 

LLC “RUSAL Engineering-Technical Center”, Saint Petersburg, Russia:
I. V. Davydov, Department Director, e-mail: ioan.davydov@rusal.com
M. N. Malofeev, Senior Researcher

Abstract

Concentrating of various slurries is an integral part of alumina production process. It is carried out in thickeners, equipped with the devices comprising the drive connected to vertical shaft. Handling beams are radially attached to the shaft. Paddles (plates) are fastened to the shaft at specified pitch and incidence angle designed for gentle mixing of thickened slurry while transferring it to the discharge sleeves. By physical properties, these slurries are Bingham fluids (i. e. they possess effective viscosity) and the paddles are streamed around in laminar mode. One of the crucial indicators of the equipment efficiency is power consumption for agitation and transfer of thickened slurry. Very little information on calculation of resistance for the stream around the paddles in laminar mode is available even for Newtonian fluids. The paper introduces the calculation method for power consumed by the drive of the thickener during the agitation and transfer of Bingham fluids. Normally power required for the specified processes is N = M(π·n)/30. М = Мn + Mt is total power rotation torque applying to paddles (plates) in Nm. For Newtonian fluids, (Мn) is a resultant rotation torque of perpendicular force (Nm).

keywords Alumina, thickener, paddles, handling beam, non-Newtonian, Bingham slurry, slurry, power, torque
References

1. Khusnutdinov R. S., Sayfullin R. S., Khabibullin I. G. Equipment for inorganic substances production. Leningrad : Khimiya, Leningradskoe otdelenie, 1987. pp. 91–97.
2. Bauman A. V. Upon modernization of domestically produced radial thickeners. Obogashchenie Rud. 2013. No. 1. pp. 44–49.
3. Bauman A. V. Criteria for choosing radial thickeners for dewatering and water circulation. Obogashchenie Rud. 2013. No. 4. pp. 40–43.
4. Kahane R., Nguyen T., Schwarz M. P. CFD modelling of thickeners at Worsley Alumina Pty Ltd. Applied Mathematical Modelling. 2002. Vol. 26, No. 2. pp. 281–296.
5. Waters A. High Density red mud residue thickeners. Filtration + Separation. 1991. Vol. 28, No. 6. pp. 398, 399.
6. Tian Zhou, Mao Li, Qiu-long Li, Bo Lei, Qian-shou Chen, Jie-min Zhou. Numerical simulation of flow regions in red mud separation thickener's feedwell by analysis of residence-time distribution. Transactions of Nonferrous Metals Society of China. 2014. Vol. 24, No. 4. pp. 1117–1124.
7. Sidrak Y. L. Control of the thickener operation in alumina production. Control Engineering Practice. 1997. Vol. 5, No. 10. pp. 1417–1426.
8. Chee Keong Tan, Jie Bao, Götz Bickert. A study on model predictive control in paste thickeners with rake torque constraint. Minerals Engineering. 2017. Vol. 105, May. pp. 52–62.
9. Kogan V. B. Theoretical basis of typical processes of chemical technology. Leningrad : Khimiya, Leningradskoe otdelenie, 1977. 591 p.
10. Skoblo A. I., Tregubova I. A., Molokanov Yu. K. Processes and apparatuses of oil production and petrochemical industry. Moscow : Khimiya, 1982. 583 p.
11. Planovskiy A. N., Nikolaev P. I. Processes and apparatuses of chemical and petrochemical industry. Moscow : Khimiya, 1987. 492 p.
12. Dytnerskiy Yu. I. Processes and apparatuses of chemical technology. Part 1. Moscow : Khimiya, 1995. 213 p.
13. Astarita D., Marrucci D. Principles of Non-Newtonian Fluid Mechanics. Translated from English. Moscow : Mir, 1978. 309 p.
14. Ostrovskiy G. M. Applied mechanics of nonuniform medium. Saint Petersburg : Nauka, 2000. 359 p.
15. Gnoev A. V., Klimov D. M., Chesnokov V. M. Basis of theory of Bingham medium flow. Moscow : Fizmatlit, 2004. 272 p.
16. Loytsyanskiy L. G. Mechanics of liquids and gases. Moscow : Nauka, 1987. 848 p.
17. New reference book of chemical technologist. Processes and apparatuses of chemical technology. Part 1. Leningrad : NPO “Professional”, 2005. 272 p.
18. Fryderyk Strenk. Mixers and units with mixers. Moscow : Khimiya, 1975. 315 p.
19. Domanskiy I. V., Davydov I. V., Malofeev M. N. Investigation of power expenditure for mixing and transport of setteled pulp in contunuous and semi-continuous thickeners. Collection of thesises of reports of the eighth international congress “Non-ferrous metals and minerals”. Krasnoyarsk, 2016. 526 p.

Language of full-text russian
Full content Buy
Back