Journals →  Tsvetnye Metally →  2017 →  #3 →  Back

NOBLE METALS AND ALLOYS
ArticleName Electrochlorination of secondary raw materials containing noble metals using bulk current lead
DOI 10.17580/tsm.2017.03.07
ArticleAuthor Lobko S. V., Kuzas E. A., Naboychenko S. S., Voinov V. N.
ArticleAuthorData

JSC “Ekaterinburg non-ferrous metals processing plant”, Verkhnyaya Pyshma, Russia:
S. V. Lobko, Leading Research Engineer

 

LLC “Ekaterinburg non-ferrous metals processing plant – Engineering”, Verkhnyaya Pyshma, Russia:
E. A. Kuzas, Engineer, e-mail: e.kuzas@ezocm.ru

 

Ural Federal University named after the first President of Russia B. N. Yeltsyn, Ekaterinburg, Russia:
S. S. Naboychenko, Professor, Head of a Chair of Non-Ferrous Metals Metallurgy
V. N. Voinov, Head of Laboratory

Abstract

Intensification of rhodium powder and panning platinum electrochlorination offers the bulk current lead usage. Electrochlorination with bulk current lead means the usage of conductive material particles as additional current lead clusters. Activated coal is loaded in electrochemical cell together with raw materials. Coal particles, contacting with main current lead surface, form the bulk current lead, which contributes the increasing of contact probability and charge transfer to raw material particles, amount of atomic chlorine release centers and raw material component dissolution velocity. During the electrochlorination of nitrogen industry enterprise slimes, extraction of Pt, Pd and Rh in solution with density of low-frequency alternating symmetrical current (1 Hz) 58.1 A per 1 kg of loaded slimes reaches 41%, 56% and 24%, respectively. Total current yield of Pt, Pd and Rh is 3.5%, and total concentration of these metals in solution is 28.54 g/dm3. During the electrochlorination of platinum-rhodium slimes, velocity of Rh dissolution is the highest (2.21 %/h) using alternating asymmetrical current with relation of anode and cathode cycle time of 2 min/min. Anode current density of 250 A per 1 kg of loaded slimes show 2.27% of Rh current yield, and 1.06 g/dm3 of Rh concentration in solution. Bulk current lead insufficiently increases the velocity of transfer of noble metals in solution during the electrochlorination of secondary raw materials. Noble metal dissolution velocity can be increased by enlarging the anode current density and activated coal loading. We are planning to carry out the investigations in industrial electrochlorinator.

keywords Electrochlorination, secondary raw materials, noble metals, bulk current lead, electrodissolution, electrochemical dissolution, hydrochlorination, activated coal, slime, atomic chlorine
References

1. Kotlyar Yu. A., Meretukov M. A., Strizhko L. S. Noble metals metallurgy. In two volumes. Volume 2. Moscow : MISiS, “Ore and Metals” Publishing House, 2005. 392 p.
2. Crundwell F. K. et al. Extractive metallurgy of nickel, cobalt and platinumgroup metals. Oxford, Amsterdam : Elsevier, 2011. 583 p.
3. Kim M., Jae-chun Lee, Sang-woon Park, Jinki Jeong, Vinay Kumar. Dissolution behaviour of platinum by electro-generated chlorine in hydrochloric acid solution. Journal of Chemical Technology and Biotechnology. 2013. Vol. 88, No. 7. pp. 1212–1219.
4. Upadhyay A. K., Jae-chun Lee, Eun-young Kim, Min-seuk Kim, Byung-Su Kim, Vinay Kumar. Leaching of platinum group metals (PGMs) from spent automotive catalyst using electro-generated chlorine in HCl solution. Journal of Chemical Technology and Biotechnology. 2013. Vol. 88, No. 11. pp. 1991–1999.
5. Mpinga C. N., Eksteen J. J., Aldrich C., Dyer L. Direct leach approaches to platinum group metal (PGM) ores and concentrates: A review. Minerals Engineering. 2015. Vol. 78. pp. 93–113.
6. Manis Kumar Jha, Jae-chun Lee, Min-seuk Kim, Jinki Jeong, Byung-Su Kim, Vinay Kumar. Hydrometallurgical recovery/recycling of platinum by the leaching of spent catalysts: A review. Hydrometallurgy. 2013. Vol. 133. pp. 23–32.
7. Electrodeposition guidance. Part 1. Ed. V. I. Layner. Translated from German. Moscow : Metallurgiya, 1972. 488 p.
8. Damaskin B. B., Petriy O. A., Tsirlina G. A. Electrochemistry. Moscow : Khimiya, 2001. 624 p.
9. Koryta I., Dvorzhak I., Bogachkova V. Electrochemistry. Moscow : Mir, 1977. 472 p.
10. Llopis J., Tordesillas I. M., Muniz M. Anodic corrosion of rhodium in hydrochloric acid solutions. Electrochimica Acta. 1965. Vol. 10, No. 11. pp. 1045–1055.
11. Applied electrochemistry. Ed. A. P. Tomilov. Moscow : Khimiya, 1984. 520 p.
12. Voinov V. N., Konik K. P., Kuzas E. A., Lobko S. V. Indicators of rhodium powder electrochlorination technology. Tsvetnye Metally. 2016. No. 9. pp. 57–62. DOI: 10.17580/tsm.2016.09.08
13. Konik K. P., Kuzas E. A., Lobko S. V., Naboychenko S. S. Electrochlorinator for dissolution of placer platinum. Tsvetnye Metally. 2016. No. 12. pp. 20–26. DOI: 10.17580/tsm.2016.12.03
14. Electrosedementation of noble and rare metals. Ed. L. I. Kadaner. Kiev : Tekhnika, 1974. 160 p.

Language of full-text russian
Full content Buy
Back