Журналы →  Obogashchenie Rud →  2016 →  №4 →  Назад

SECONDARY RAW MATERIAL PROCESSING
Название Beneficiated sand production from rock material crushing screenings by means of air classifier
DOI 10.17580/or.2016.04.09
Автор Kapustin F. L., Ponomarev V. B.
Информация об авторе

Ural Federal University named after the first President of Russia B. N. Yeltsin (Russia):

Kapustin F. L., Doctor of Engineering Sciences, Professor, Head of Chair, F.L.Kapustin@urfu.ru
Ponomarev V. B., Ph. D. in Engineering Sciences, Associate Professor, v.b.ponomarev@urfu.ru

Реферат

By way of the example of the Pervouralskoye deposit titanium-magnetite ores, a dry treatment method of associated rocks material crushing screenings has been considered, providing for beneficiated sand production for construction purposes. It is noted, that disperse materials screening and hydraulic classification operations, applied at mining facilities, are not suitable for dust removal from crushing screenings. Air sizing of granular materials with application of cascade units is one of the efficient methods of beneficiation. Crossflow classifier design, conditions and main processing parameters of rocks material crushing screenings beneficiation process have been examined. The experimental results of gabbro and hornblendite materials, as well as their mixtures, crushing screenings air sizing by means of the apparatus in question, are presented. Beneficiated sand grain-size distribution was determined. Dependence of final product yield and its dust content upon velocity of air flow passing through classifier, as well as dependence of screenings beneficiation efficiency upon air-and-material particles mixture concentration, are presented. A commercial plant flow sheet is proposed, main parameters of crossflow classifier with the throughput rate from 20 to 100 t/hr are described.

Ключевые слова Rocks material crushing screenings, dust content, air separation, crossflow classifier, beneficiated sand, commercial plant flow sheet
Библиографический список

 

1. Vaysberg L. A., Kameneva E. E., Aminov V. N. Assessment of technological capabilities of control over crushed stone quality in the course of disintegration of building rocks. Stroitelnye Materialy = Construction Materials, 2013, No. 11, pp. 30–34.
2. Cepuritis R. Sand from the rocks. Bulk Solids Handling, 2014, Vol. 34, Iss. 3, pp. 42–48.
3. Arsentyev V. A., Vaysberg L. A., Shuloyakov A. D., Romashev A. O. Waste utilization technologies for nonmetallic reject aggregates. Obogashchenie Rud = Mineral Processing, 2012, No. 5, pp. 51–54.
4. Khamidulina L. D., Garkavi M. C., Yakubov V. I., Rodin A. S., Kushka V. N. Breakage screening — an effective way to improve the quality of concrete. Stroitelnye Materialy = Construction Materials, 2006, No. 11, pp. 50–51.
5. Arsentiev V. A., Vaisberg L. A., Samukov A. D. Nonwaste production of mass use building materials out of volcanic rocks. Gonyi Zhurnal = Mining Journal, 2014, No. 12, pp. 55–62.
6. Valgma I., Väizene V., Kolats M., Saarnak M. Technologies for decreasing mining losses. Environmental and Climate Technologies, 2013, Vol. 11, Iss. 1, pp. 41–47.
7. Tohver T. Utilization of waste rock from oil shale mining. Oil Shale, 2010, Vol. 27, Iss. 4, pp. 321–330.
8. Ponomarev V. B. Processing of metallurgical slag by pneumatic separation method. Stal = Steel, 2015, No. 2, pp. 82–83.
9. Ponomarev V. B. Separating of refractory powders by air separation. Novye Ogneupory = Refractories and Industrial Ceramics, 2014, No. 10, pp. 68–69.
10. Cepuritis R., Jacobsen S., Onnela T. Sand production with VSI crushing and air classification: Optimising fines grading for concrete production with micro-proportioning. Minerals Engineering, 2015, Vol. 78, pp. 1–14.
11. Ponomarev V. B. Dry processing of rock breaking waste. Gornyi Zhurnal = Mining Journal, 2015, No. 12,
pp. 50–52.
12. Barsky E. М. Efficacy of separation of a pourable material. High Temperature, 2009, Vol. 47, Iss. 6, pp. 822–828.
13. Barsky E. M. Entropy of two-phase flows in the mode of separation. Journal of Mining Science, 2013, Vol. 49, Iss. 2, pp. 308–318.
14. Borisevich V., Borshchevskiy M., Andronov I., Senchenkov S. Assessment of parameters of gas centrifuge and separation cascade basing on integral characteristics of separation plant. Nuclear Engineering and Design, 2013, Vol. 265, pp. 1066–1070.
15. Mizonov V. E., Kazakov Yu. B., Barantseva V. A., Filippov V. A. Nonlinear cell model of particles deposition in concentrated suspensions. Izvestiya Vysshikh Uchebnykh Zavedeniy. Seriya «Khimiya i Khimicheskaya Tekhnologiya», 2011, No. 12, pp. 104–106.
16. Kazakov Yu. B., Mizonov V. E., Barantseva V. A., Filippov V. A. Mechanics of particle separation from the
concentrated slurry at non-uniform mass force. Vestnik IGEU, 2011, Iss. 3, pp. 17–19.

 

Language of full-text русский
Полный текст статьи Получить
Назад