Journals →  Tsvetnye Metally →  2015 →  #11 →  Back

LIGHT METALS, CARBON MATERIALS
ArticleName Recycling of superconducting matter production wastes during the calcium obtaining
DOI 10.17580/tsm.2015.11.06
ArticleAuthor Talanov A. A., Kotsar M. L., Kiverin V. L., Grachev R. S.
ArticleAuthorData

JSC “Chepetsky Mechanical Plant”, Glazov, Udmurt Republic, Russia:

A. A. Talanov, Leading Engineer
V. L. Kiverin, Head of Calcium Production Shop
R. S. Grachev, Head of Superconducting Matter Production Shop

 

JSC “Leading Scientific-Research Institute of Chemical Technology(VNIIKhT)”, Moscow, Russia:

M. L. Kotsar, Head of Laboratory, e-mail: kotsar@vniiht.ru

Abstract

Copper losses appear during the production of metallic calcium by electrolytic method, which compensation requires the introduction of cathode copper (14.7 kg per 1 ton of calcium) into the electrolyzer. The process of production of superconducting matters at Chepetsky Mechanical Plant forms the copper-containing wastes, which are the compact composites, having different shapes and sizes, consisting of wire made of niobium-titanium alloy NT-47 (НТ-47) on copper base, and commingled turnings, containing copper and alloy particles and lubricating-cooling fluid. This article considers the following methods of superconducting matter waste processing:
– high-temperature processes including copper melting.
– dissolution of copper from superconducting matter rods directly in coppercalcium alloy in the running electrolyzer.

– obtaining of briquettes by pressing the turnings followed by vacuum annealing at the temperature of 700–750 °C.
The first method was found to be unsuitable because of the formation of copper alloys with components of niobium-titanium wire. The obtained ingots did not dissolve in the copper-calcium alloy, because titanium and niobium are insoluble in calcium. The second and third methods are the most perspective of the considered ones. To implement the second method, a technological scheme for the processing of superconducting rods was developed. This scheme includes utilization of both copper and niobium-titanium alloy. However, at present it is not being applied at the plant because of difficulties of sorting superconducting matter wastes. Processing of turnings of superconducting matter wastes on an industrial scale by the third method covers about 70 per cent of copper requirement for calcium manufacturing.

keywords Calcium production, superconducting matter, wastes, recycling, copper, niobium, titanium, electrolysis, rate of application, decreasing
References

1. Doronin N. A. Kaltsiy (Calcium). Moscow : Atomizdat, 1962. 192 p.
2. Rodyakin V. V. Kaltsiy, ego soedineniya i splavy (Calcium, its compounds and alloys). Moscow : Metallurgiya, 1967. 188 p.
3. Talanov A. A., Kotsar M. L., Ilenko E. V., Kiverin V. L., Kochubeeva S. L. Analiz tekhniko-ekonomicheskikh pokazateley sovremennogo proizvodstva kaltsiya (The analysis of technical and economic indexes of modern calcium manufacturing). Tsvetnye Metally = Non-ferrous metals. 2013. No. 1. pp. 57–60.
4. Bruzzone P. Superconductors for fusion: Achievements, open issues, roadmap to future. Physica C: Superconductivity. 2010. Vol. 470, iss. 20. pp. 1734–1739.
5. Dergunova E., Vorobieva A., Abdyukhanov I., Mareev K., Balaev S., Aliev R., Shikov A., Vasiliev A., Presnyakov M., Orekhov A. The Study of Nb3Sn Phase Content and Structure Dependence on the Way of Ti Doping in Superconductors Produced by Bronze Route. Physics Procedia. 2012. Vol. 36. pp. 1510–1515.
6. Parshin A. P., Lazarenko V. V., Morozov O. A., Kobozev V. N., Drobyshev V. A., Myasnikov V. V., Saraev A. K., Kosenko V. P., Lozovskiy I. N. Sposob pererabotki metallicheskogo loma, soderzhashchego med (Method of processing of copper-containing metallic scrap). Certificate of Authority USSR, No. 1669194, IPC3 C 22 B 7/00. Published: December 23, 1992. Bulletin No. 47.
7. Kunev A. I., Shtutsa M. G., Kotsar M. L., Talanov A. A., Abramushin K. M., Dobroskokina T. A., Ilenko E. V., Kiverin V. L., Koparulin I. G., Lazarenko V. V., Manukyan A. M., Nauman V. A., Popov A. M., Safonov V. A. Sposob pererabotki medsoderzhashchikh otkhodov (Method of processing of copper-containing wastes). Patent RF, No. 2393247, IPC7 C 22 B 7/00, 15/00. Published: June 27, 2010. Bulletin No. 18.
8. Boltachev A. A., Grachev R. S., Kiverin V. L., Kotsar M. L., Maksimov S. V., Martynov A. A., Talanov A. A., Khudyakov D. A. Sposob utilizatsii medsoderzhashchikh otkhodov (Method of recycling of copper-containing wastes). Patent RF, No. 2559076, IPC7 C 22 B 7/00. Published: August 10, 2015. Bulletin No. 22.
9. Wu J., Pan Y., Li X., Wang X. Microstructure evolution and mechanical properties of Nb-alloyed Cu-based bulk metallic glasses and composites. Materials & Design. 2015. Vol. 75. pp. 32–39.
10. Gargarella P., Pauly S., de Oliveira M. F., Ku..hn U., Eckert J. Glass formation in the Ti–Cu system with and without Si additions. Journal of Alloys and Compounds. 2015. Vol. 618. pp. 413–420.
11. Okamoto H. Cu-Nb (Copper-Niobium). Journal of Phase Equilibria and Diffusion. 2012. Vol. 33, No. 4. 344 p.
12. Okamoto H. Cu–Ti (Copper-Titanium). Journal of Phase Equilibria. 2002. Vol. 23, iss. 6. pp. 549–550.
13. Kotsar M. L., Sinegribov V. A., Degtyareva L. V., Sutyagina E. I., Cheremnykh G. S., Agapitov V. A., Indyk S. I., Shtutsa M. G. Sposob obrabotki medsoderzhashchikh otkhodov (Method of processing of copper-containing wastes). Patent RF, No. 2236473, IPC7 C 22 B 7/00. Published: September 20, 2004. Bulletin No. 26.
14. Kotsar M. L., Degtyareva L. V., Sutyagina E. I., Sinegribov V. A., Cheremnykh G. S., Agapitov V. A., Zelenchev A. V., Indyk S. I. Sposob rastvoreniya medi (Copper dissolution method). Patent RF, No. 2243163, IPC7 C 01 G 3/08, C 01 B 12/48. Published: December 27, 2004. Bulletin No. 36.

Language of full-text russian
Full content Buy
Back