Journals →  Tsvetnye Metally →  2015 →  #9 →  Back

COMPOSITES AND MULTIPURPOSE COATINGS
ArticleName Formation of protective composite coatings on magnesium alloy using the method of plasma electrolytic oxidation and telomeric solution
DOI 10.17580/tsm.2015.09.13
ArticleAuthor Gnedenkov S. V., Sinebryukhov S. L., Mashtalyar D. V., Nadaraia K. V.
ArticleAuthorData

Institute of Chemistry of Far Eastern Branch of Russian Academy of Sciences, Vladivostok, Russia:

S. V. Gnedenkov, Professor, Deputy Director for Science, Head of Department of Electrochemical Systems and Surface Modification Processes
S. L. Sinebryukhov, Assistant Professor, Head of Laboratory of Non-stationary Surface Processes
D. V. Mashtalyar, Senior Researcher, Laboratory of Biomedical Purpose Composite Coatings, e-mail: madiva@inbox.ru
K. V. Nadaraia, Junior Researcher of Laboratory of Non-Stationary Surface Processes

Abstract

Method of the composite polymer-containing coatings formation on magnesium alloys is presented. This way significantly improves the functional properties of processed material. Initially, coatings have been formed on the treated alloy by plasma electrolytic oxidation (PEO). Such coatings have a convolute and rough surface with a good adhesion to the substrate. Then composite coating has been obtained by dipping of the sample in tetrafluoroethylene telomeric solution for sealing pores and microdefects in the base PEO-layer. Optimal modes of the subsequent heat treatment of composite polymer-containing coatings have been developed in order to obtain the best protective properties. Composite coating obtained by tree-fold application of telomere has highest anticorrosion properties and wear resistance. For such coating corrosion current density in 3% NaCl solution does not exceed a value of 1.43·10–9 A/cm2, and wear tested by “ball-ondisk” method using corundum ball was reduced down to 5.7.10–6 mm3/(N·m). For the composite coating the wear was abated by three order of magnitude, and the polarization resistance was increased by four orders of magnitudes in comparison with the bare alloy. Improving of corrosion and mechanical properties is the result of presence in the composite coating the chemically stable fluoropolymer used as a dry lubricant during friction. It has been shown, that the morphological structure of surface varies depending on the multiplicity of application by tetrafluoroethylene telomeric solution on the surface of base PEO-layer. It has been established, that composite coatings have hydrophobic properties: values of contact angle vary in the range from 143о to 168о depending on the multiplicity of application with telomere.

keywords Magnesium alloys, protective coatings, plasma electrolytic oxidation, telomeric solutions, composite coatings, corrosion, hydrophobic properties, fluoropolymers
References

1. Boinet M. Plasma electrolytic oxidation of AM60 magnesium alloy: Monitoring by acoustic emission technique. Electrochemical properties of coatings. M. Boinet, S. Verdier, S. Maximovitch, F. Dalard. Surface & Coatings Technology. 2005. Vol. 199. pp. 141–149.
2. Bouznik V. M. Superhydrophobic materials based on fluoropolymer. Aviation materials and technology. 2013. No. 1. pp. 29–34.
3. Dongya Zhang. Electrophoretic deposition of PTFE particles on porous anodicaluminum oxide film and its tribological properties. Zhang Dongya, Dong Guangneng, Chen Yinjuan, Zeng Qunfeng. Applied Surface Science. 2014. Vol. 290. pp. 466–474.
4. Gnedenkov S. V. Composite polymer-containing protective coatings on magnesium alloy MA8. S. V. Gnedenkov, S. L. Sinebryukhov, D. V. Mashtalyar, V. S. Egorkin, M. V. Sidorova, A. S. Gnedenkov. Corrosion Science. 2014. Vol. 85. pp. 52–59.
5. Gnedenkov S. V. Multifunctional composite coatings on metals and alloys formed by plasma electrolytic oxidation. S. V. Gnedenkov, S. L. Sinebryukhov, V. I. Sergienko. Vladivostok Dalnauka. 2013. 460 p.
6. Gnedenkov S. V. Formation and electrochemical properties of the superhydrophobic nanocomposite coating on PEO pretreated Mg – Mn – Ce magnesium alloy. S. V. Gnedenkov, V. S. Egorkin, S. L. Sinebryukhov, I. E. Vyaliy, A. S. Pashinin, A. M. Emelyanenko, L. B. Boinovich. Surface and Coatings Technology. 2013. Vol. 232. pp. 240–246.
7. Hussein R. O. The effect of processing parameters and substrate composition on the corrosion resistance of plasma electrolytic oxidation (PEO) coated magnesium alloys. R. O. Hussein, D. O. Northwood, X. Nie. Surface & Coatings Technology. 2013. Vol. 237. pp. 357–368.
8. Kiryukhin D. P. Radiation-chemical synthesis of telomeres of tetrafluoroethylene and use them to create a thin protective fluoropolymer coatings. D. P Kiryukhin, I. P. Kim, V. M. Bouznik, L. N. Ignatieff, V. G. Kuryavyi, S. G. Sakharov. Russian Chemical Journal (Journal of the Russian chemical Society. Mendeleev's). 2008. Vol. 52, No. 3. pp. 66–72.
9. Li Wang. Optical emission spectroscopy studies of discharge mechanism and plasma characteristics during plasma electrolytic oxidation of magnesium in different electrolytes Wang Li, Chen Li, Yan Zongcheng, Fu Wen. Surface & Coatings Technology. 2010. Vol. 205. pp. 1651–1658.
10. Ma C. X. Characterization of plasma electrolytic oxidation coatings formed on Mg – Li alloy in an alkaline polyphosphate electrolyte. C. X. Ma, Y. Lu, P. P. Sun, Y. Yuan, X. Y. Jing, M. L. Zhang. Surface & Coatings Technology. 2011. Vol. 206. pp. 287–294.
11. Martini C. PEO layers obtained from mixed aluminate–phosphate baths on Ti – 6Al – 4V: Dry sliding behaviour and influence of a PTFE topcoat. C. Martini, L. Ceschini, F. Tarterini, J. M. Paillard, J. A. Curran. Wear. 2010. Vol. 269. pp. 746–757.
12. Stalder A. F. Low-bond axisymmetric drop shape analysis for surface tension and contact angle measurements of sessile drops. A. F. Stalder, T. Melchior, M. Muller, D. Sage, T. Blu, M. Unser. Colloids and Surfaces A: physicochemical and engineering aspects. 2010. Vol. 364. pp. 72–81.
13. Yoichi Mori. Characteristics and corrosion resistance of plasma electrolytic oxidation coatings on AZ31B Mg alloy formed in phosphate — Silicate mixture electrolytes. Mori Yoichi, Koshi Akihiko, Liao Jinsun, Asoh Hidetaka, Ono Sachiko. Corrosion Science. 2014. Vol. 88. pp. 254–262.
14. Yunlong, Wang. Microstructure and corrosion resistance of ceramic coating on carbon steel prepared by plasma electrolytic oxidation. Wang Yunlong, Jiang Zhaohua, Yao Zhongping, Tang Hui. Surface & Coatings Technology. 2010. Vol. 204. pp. 1685–1688.

Language of full-text russian
Full content Buy
Back