Journals →  Tsvetnye Metally →  2013 →  #9 →  Back

TO THE 100-th ANNIVERSARY OF ACADEMICAN I. N. FRIDLYANDER
ArticleName High-strength aluminium alloys
ArticleAuthor Antipov V. V., Senatorova O. G., Tkachenko E. A.
ArticleAuthorData

All-Russian Scientific Research Institute of Aviation Materials “VIAM”, Moscow, Russia

V. V. Antipov, Deputy Chief Executive Officer, е-mail: admin@viam.ru
O. G. Senatorova, Head of Department
E. A. Tkachenko, Head of Department

Abstract

This article describes the achievements in the field of highstrength alloys (UTS = 500–700 MPa) of traditional Al – Zn – Mg – Cu-system. These alloys were developed and produced under the scientific guidance of аcademician I. N. Fridlyander. There is shown the important regularity of change of a combination of properties (mechanical, fatigue and corrosion), depending on the content of main alloying Cu and Zn elements. Efficiency of small additives of transition elements-antirecrystallizers, is shown along with the role of Zr addition (subgrain hardening, increasing of hardenability and plasticity), which was established in the world practice for the first time. The limits of Zr addition content are also shown for the purpose of avoiding of appearance of excessive ZrAl3 inclusions. Three groups of high-strength and ultra-highstrength aluminium wrought alloys are described along with their application in aviation and nuclear engineering. The main high-strength V95 (В95) alloys (σв = 500 MPa) are included in the first group because of their widely usage in modern aviation structures. In 1970–1980-s, the properties of these alloys (especially fracture toughness and corrosion resistance) were cardinally improved as a result of impurity content restriction and introduction of multi-step aging (T2, T3), according to the damage-tolerance design concept. Nowadays, the ultra-high-strength (σв = 600 MPa) V96ts-3pch (В96ц-3пч) alloys are mastered in aviation structures (for example, for upper skin of wing). More strength (σв = 650 MPa) V96ts (В96ц) alloy is used for the gas centrifuges in nuclear engineering. High-strength forgeable V93 (В93) and 1933 (high fracture toughness) alloys are related to the important group for load bearing inner elements (fittings, spars etc.).

keywords High-strength alloys, ultra-high-strength alloys, forgeable alloys, basic components, small additives, application
References

1. Fridlyander I. N. Vysokoprochnye deformiruemye alyuminievye splavy (Highstrength wrought aluminium alloys). Moscow : Oborongiz, 1960. 291 p.
2. Fridlyander I. N., Senatorova O. G., Tkachenko E. A. Vysokoprochnye splavy sistemy Al – Zn – Mg – Cu (High-strength alloys of Al – Zn – Mg – Cu system). Mashinostroenie. Entsiklopediya. Tom 3. Tsvetnye metally i splavy (Mechanical engineering. Encyclopedia. Volume 3. Non-ferrous metals and alloys). Moscow : Mashinostroenie, 2001. pp. 94–128.
3. Fridlyander I. N. Vospominaniya. O sozdanii aviakosmicheskoy i atomnoy tekhniki iz alyuminievykh splavov (Remembrances. About creation of aviacosmic and nuclear machinery from aluminium alloys). Moscow : Nauka, 2005. 275 p.
4. Fridlyander I. N., Senatorova O. G., Tkachenko E. A., Molostova I. I. Razvitie i primenenie vysokoprochnykh splavov sistemy Al – Zn – Mg – Cu dlya aviakosmicheskoy tekhniki (Development and application of high-strength alloys of Al – Zn – Mg – Cu system for avia-cosmic machinery). 75 let VIAM. Aviatsionnye materialy : yubileynyy nauchno-tekhnicheskiy sbornik (75 anniversary of VIAM. Aviation materials : anniversary scientific and technical collection). Moscow : VIAM, 2007. pp. 155–163.
5. Fridlyander I. N., Senatorova O. G. Development and application of high-strength Al – Zn – Mg – Cu alloys. Proceedings of ICAA-5. Grenoble, France, 1996. pp. 1813–1818.
6. Tkachenko E. A., Valkov V. J., Baratov V. I., Fridlyander I. N. The Properties and Structure of High-strength Aluminium 1933 Alloy Forgings. Proceedings of ICAA-5. Grenoble, France, 1996. pp. 1819–1823.
7. Semenov A. E., Korzina N. S., Soloveva V. V. Intermetallicheskie soedineniya v izdeliyakh splava V96ts (Intermetallic compounds in the V96ts (В96ц) alloy products). Konstruktsionnye splavy : sbornik No. 5 (Structural alloys : collection No. 5). Moscow : Metallurgiya, 1968. pp. 225–228.
8. Antipov V. V. Strategiya razvitiya titanovykh, magnievykh, berillievykh i alyuminievykh splavov (Strategy of development of titanium, magnesium, berillium and aluminium alloys). Aviatsionnye materialy i tekhnologii : yubileynyy nauchno-tekhnicheskiy sbornik (Aviation materials and technologies : anniversary scientific and technical collection). Moscow : VIAM, 2012. pp. 157–166.
9. Antipov V. V., Senatorova O. G., Tkachenko E. A., Vakhromov R. O. Alyuminievye deformiruemye splavy (Aluminium wrought alloys). Aviatsionnye materialy i tekhnologii : yubileynyy nauchnotekhnicheskiy sbornik (Aviation materials and technologies : anniversary scientific and technical collection). Moscow : VIAM, 2012. pp. 167–182.
10. Vakhromov R. O., Antipov V. V., Tkachenko E. A. Research and Development of High-strength of Al – Zn – Mg – Cu Alloys. Proceedings of ICAA-13. Pittsburg, USA, 2012. pp. 1515–1520.

Language of full-text russian
Full content Buy
Back