Journals →  Tsvetnye Metally →  2013 →  #8 →  Back

HEAVY NON-FERROUS METALS
ArticleName Mathematical modelling of mass delivery processes in melt during the deoxidizing of copper with fuel
ArticleAuthor Zhukov V. P., Ageev N. G., Popov A. I., Lebed A. B., Yakhnev M. A.
ArticleAuthorData

Chair of Metallurgy of Heavy Non-Ferrous Metals, Ural Federal University named after the first president of Russia B. N. Yeltsin, Ekaterinburg, Russia

V. P. Zhukov, Professor, e-mail: zhukov.v.p@mail.ru
N. G. Ageev, Professor
M. A. Yakhnev, Candidate for a Master's Degree

“Uralelectromed” JSC, Verkhnyaya Pyshma, Sverdlovsk Oblast, Russia

A. I. Popov, Head of Laboratory


Office of Strategic Plans, Ural Mining and Mettallurgical Company, Verkhnyaya Pyshma, Russia

A. B. Lebed, Chief Specialist of Metallurgy Department

Abstract

There was carried out the mathematical description of processes of oxygen and carbon mass delivery within the melt and during the deoxidizing of copper with fuel. There is shown that unsteady-state oxygen diffusion within the liquid phase is the most probable limiting stage of the process. In the laboratory experiment conditions, the time of beginning of fuel evaporation was calculated on the basis of equation of transient heat conduction. There is formulated the supposition, that after the beginning of reducing agent boiling (250 оC), the copper deoxidizing process goes with the gaseous phase, containing carbon monoxide. Organization of melt mixing by flushing of inert gas or gaseous reducing agent is considered as reasonable for the purpose of intensification of oxygen removement during the anodic melting. There was obtained the fitted equation of copper oxidation rate, depending on the length of process with the temperature of 1150 оC.

keywords Mass carry, reduction, unsteady-state diffusion, fuel, diffusion, oxygen, carbon, transient heat conduction, fire refining
References

1. R. Byron Bird, Warren E. Stewart, Edwin N. Lightfoot. Yavlenie perenosa (Transport phenomena). Moscow : Khimiya, 1974. 684 p.
2. Zhukov V. P., Spitchenko V. S., Novokreshchenov S. A. et al. Rafinirovanie medi (Copper refining). Ekaterinburg : Ural Federal University, 2010. 317 p.
3. Chursin V. M. Plavka mednykh splavov (Melting of copper alloys). Moscow : Metallurgiya, 1982. 152 p.
4. Transportnye svoystva metallicheskikh i shlakovykh rasplavov (Transport properties of metallic and slag melts). Under the editorship of A. N. Vatolin. Moscow : Metallurgiya, 1995. 648 p.
5. Lisienko V. G., Shchelokov Ya. M., Ladygichev M. G. Khrestomatiya energosberezheniya. Kniga 1 (Energy-saving book. Book 1). Moscow : Teploenergetiki, 2002. 688 p.
6. Adamov V. A. Szhiganie mazuta v topkakh kotlov (Oil burning in the fired boilers). Leningrad : Nedra, 1989. 302 p.
7. Khudyakov I. F., Tikhonov A. I., Deev V. I., Naboychenko S. S. Metallurgiya medi, nikelya i kobalta. Tom 1 (Metallurgy of nickel and cobalt copper. Volume 1). Moscow : Metallurgiya, 1977. 295 p.

Language of full-text russian
Full content Buy
Back