Journals →  Tsvetnye Metally →  2013 →  #4 →  Back

METAL PROCESSING
ArticleName Formation of structure and properties of aluminum ingots under the magnetohydrodynamic conditions
ArticleAuthor Khripchenko S. Yu., Dolgikh V. M., Denisov S. A., Kolesnichenko I. V., Nikulin L. V.
ArticleAuthorData

1 Institute of Continuous Media Mechanics (Ural Branch of Russian Academy of Sciences), Perm, Russia

S. Yu. Khripchenko, Leading Researcher, e-mail: sk@icmm.ru
V. M. Dolgikh, Senior Researcher
S. A. Denisov, Senior Researcher
I. V. Kolesnichenko, Researcher
L. V. Nikulin, Senior Researcher

Abstract

Magnetohydrodynamic (MHD) effects on the structure and properties of aluminum alloy ingots are studied. The paper addresses the problems associated with macrostructure identification, assessment of crystalline area dimensions, determination of grain hardness and number in the control area in the center of ingot, and evaluation of the non-uniform distribution of alloying elements throughout the height of ingots and along their radius are solved. The MHD-processing technique for melts implies that the rotating and traveling magnetic fields can be applied separately and in combination. The velocity and kinetic characteristics of the flow excited by magnetic fields have been calculated. Based on the experimental results, the curves for the dependence of crystalline area dimensions, grain hardness and number on the way of applying varying magnetic fields and on the magnitude of the excitation current on inductors have been plotted. It turns out that the optimal mode is a combination of rotating and traveling magnetic fields. When the direction of melt flows is reversed, the alloy components are redistributed throughout the height of ingots and along their radius. The occurrence of grain refinement and nondendritic structure formation is shown. It has been found that the elimination of dendritic structures and grain refinement improve the quality of foundry alloys and increase the deformability of ingots during the fabrication process. A new technique for controlling the granular structure of ingots can be used to prepare melts for plastic deformation and to fabricate cast products.

keywords Aluminum ingot, magnetohydrodynamic effect, rystalline areas, hardness, macrograin, element distribution, alloy, structure, properties
References

1. Tsaplin A. I. Teplofizika vneshnikh vozdeystviy pri kristallizatsii slitkov na mashinakh nepreryvnogo litya (Thermal physics of external influences in the time of crystallization of alloys at the continuous casting machines). Ekaterinburg : Institute of Engineering Science (Ural Department of Russian Academy of Sciences), 1995. 238 p.
2. Khripchenko S. Yu. Elektrovikhrevye techeniya v kanalakh MGD-ustroystv (Electric vortical flows in the channels of magnetohydrodynamic units). Ekaterinburg : Institute of Continuous Media Mechanics (Ural Branch of Russian Academy of Sciences), 2009. 261 p.
3. Samoylovich Yu. A. Kristallizatsiya slitka v elektromagnitnom pole (Crystallization of alloy in electromagnetic field). Moscow : Metallurgiya, 1986. 169 p.
4. Ueno K., Hoyo H., Ishii H., Shimasaki S-i., Taniguchi S. Numerical Study of Temperature Development of Slurry of Al – Si-Alloy in Double-Axis-Elektromagnetic Stirrer. Journal of Iron and Steel Research. 2012. Vol. 19, Suppl. 1-1. pp. 269–272.
5. Kao A., Perincleuos K. Investigating Magnetic Field Orientation as an Operational Parameter in Thermoelectric MHD Solidification. Journal of Iron and Steel Research. 2012. Vol. 19, Suppl. 1-1. pp. 260–264.
6. Khripchenko S., Dolgich V., Denisov S., Kolesnichenko I., Nikulin L. Solidification of Cylindrical Aluminium Ingots With MHD-Stirring. Journal of Iron and Steel Research. 2012. Vol. 19, Suppl. 1-1. pp. 377–380.
7. Balandin G. F. Formirovanie kristallicheskogo stroeniya otlivok (Formation of crystalline structure of foundry goods). Moscow : Mashinostroenie, 1976. 272 p.
8. Borisov V. G. Tsvetnye Metally — Non-ferrous metals. 2001. No. 9/10. pp. 93–95.
9. Zelenetskiy T. A., Ivanov N. K., Petrov N. G., Kechin A. V., Petrichenko I. V. Anod-protektor (Anode-protector). Patent RF, No. 111856. Applied : August 24, 2011. Published : December 27, 2011.
10. GOST 26251–84. Protektory dlya zashchity ot korrozii. Tekhnicheskie usloviya (State Standard 26251–84. Protectors for corrosion defence. Technical requirements). Introduced : January 01, 1986. Moscow : Publishing House of Standards, 1987.

Language of full-text russian
Full content Buy
Back