Journals →  Tsvetnye Metally →  2013 →  #4 →  Back

NOBLE METALS AND ALLOYS
ArticleName Development of hydrometallurgical processing technology for the oxidized gold-containing ore from Taror deposit
ArticleAuthor Strizhko L. S., Boboev I. R., Gurin K. K., Rabiev F. B.
ArticleAuthorData

National University of Science and Technology “MISiS”, Moscow, Russia

L. S. Strizhko, Professor of a Chair of Non-ferrous Metals and Gold, e-mail: sls_2007.47@mail.ru
I. R. Boboev, Post-graduate Student of a Chair of Non-ferrous Metals and Gold
K. K. Gurin, Post-graduate Student of a Chair of Non-ferrous Metals and Gold

 

Subsidiary of National University of Science and Technology “MISiS” in Dushanbe, Dushanbe, Tadzhikistan

F. B. Rabiev, Student

Abstract

In this article is presented a method for extracting gold from iron and copper-containing products, which is one of the main problems of gold mining industry of the XXI century. Generally, the presence of iron reduces efficiency of technological processes and performance of gold recovery due to the high cyanide consumption, which makes it necessary to use additional operations on the transformation of iron into an insoluble form, and intensification of the cyanide process. In this regard, shown are results of research on pre-treatment of gold containing product with caustic soda in laboratory agitators with ultrasonic transducers to increase dissolved oxygen content. The influence of oxygen on rate of transition of iron into the form that is not soluble in cyanide solutions, was studied. Another important factor affecting the extraction of gold and high cyanide consumption is the presence of copper minerals in gold-containing products. Copper consumes large amounts of cyanide. Copper cyanide is more stable than free cyanide, and has a detrimental impact on the environment. In connection with this, the ammonium cyanide method for extracting gold from copper-containing products was proposed. Optimum conditions for carrying out the process of gold dissolution from copper-containing product in ammonium cyanide solutions were determined. Influence of copper and ammonia on kinetics of extraction of gold was investigated. It was shown that the presence of ammonia in solution reduces the consumption of cyanide to 0.7 kg/t without change of indicators of extraction of gold. Presented are results of study on gold sorption from ammonium cyanide solutions using activated carbon brand NWS G6*12 and resins AuRIX®100, as well as the advantage of the sorption properties of carbon compared with resins.

keywords Gold-containing product, iron, copper, caustic soda pre-treatment, ultrasound transducer, ammonium cyanide method of dissolution, sorption extraction, activated carbon, resin
References

1. Strizhko L. S., Bobokhonov B. A., Boboev I. R. Tsvetnye Metally — Non-ferrous metals. 2012. No. 7. pp. 41–44.
2. Bobokhonov B. A., Rabiev B. R., Boboev I. R. Sovmestnoe predpriyatie “Zarafshon”: tekhnologii pererabotki zolotosoderzhashchikh rud (“Zarafshon” Joint Enterprise: processing of the gold-containing ores). Gornyi Zhurnal — Mining Journal. 2012. Special issue. pp. 46–50.
3. Bocharov V. A., Ignatkina V. A. Izvestiya vuzov. Tsvetnaya metallurgiya — Russian Journal of Non-Ferrous Metals. 2007. No. 5. pp. 4–12.
4. Filippov A. P., Nesterov Yu. V. Redoks-protsessy i intensifikatsiya vyshchelachivaniya metallov (Redox processes and intensification of metal leaching). Moscow : “Ore and Metals” Publishing House, 2009. 543 p.
5. Meretukov M. A. Zoloto: khimiya, mineralogiya, metallurgiya (Gold: chemistry, mineralogy, metallurgy). Moscow : “Ore and Metals” Publishing House, 2008. 528 p.
6. Muir D. M. A review of the selective leaching of gold from oxidized copper-gold ores with ammonia-cyanide and new insights for plant control and operation. Minerals Engineering. 2011. Vol. 24, Iss. 6. pp. 576–582.
7. Strizhko L. S., Bobokhonov B. A., Boboev I. R. Razrabotka tekhnologii izvlecheniya zolota iz okislennykh rud, soderzhashchikh myshyak (Development of gold extraction technology from the leached ores, containing arsenic). Sbornik nauchnykh trudov SWorld (Collection of scientific proceedings SWorld). October, 2011. pp. 37–43.
8. Kotlyar Yu. A., Meretukov M. A., Strizhko L. S. Metallurgiya blagorodnykh metallov : uchebnik. V dvukh knigakh (Metallurgy of noble metals. A manual in two volumes). Moscow : MISiS, “Ore and Metals” Publishing House, 2005.
9. Costello M. C., Ritchie I. C., Lunt D. J. Use of the ammoniacyanideleachsystem for gold copper ores with reference to the retreatment of the torco tailings. Minerals Engineering. 1992. Vol. 5, Iss. 10-12. pp. 1421–1429.
10. Jeffrey M. I., Linda L., Breuer P. L., Chu C. K. A kinetic and electrochemical study of the ammonia cyanide process for leaching gold in solutions containing copper. Minerals Engineering. 2002. Vol. 15, Iss. 12. pp. 1173–1180.
11. Lodeyshchikov V. M., Khmelnitskaya O. D., Voyloshnikov G. I. Tsvetnye Metally — Non-ferrous metals. 2010. No. 8. pp. 87–90.
12. Zinchenko Z. A., Samekhov Sh., Boboev I. R. Vestnik Tadzhikskogo tekhnicheskogo universiteta — Journal of Tadzhikistan State University. 2010. No. 3 (11). pp. 60–62.
13. Gray A. H., Hughes T., Abols J. The Use of AuRIX®100 Resin for the Selective Recovery of Gold and Silver From Copper, Gold and Silver Solutions. Gekko systems. Available at: http://www.gekkos.com/documents/028TheUseOfAuRIX100ResinForTheSelectiveRecoveryOfGoldAndSilverFromCopperGoldAndSilverSolutions.pdf.

Language of full-text russian
Full content Buy
Back