\ \
main page news products price list about contacts
Gorny Zhurnal
Tsvetnye Metally
Chernye Metally
Obogashchenie Rud
Gorny Mir
Meterialy Elektonnoy Tekhniki
News of Global Nuclear Market
Eurasian mining
Non-ferrous metals
CIS Iron & Steel Review
ÌÐÒ. Metallurgiacl Plant and Technology
ÑÐÒ. Casting Plant and Technology
Al and its Alloys
Catalogues
Books
Muzeum
Archive
  About "Tsvetnye Metally"  


“Tsvetnye Metally” is the leading Russian monthly journal devoting to all problems of non-ferrous metallurgy (heavy metals, rare metals, light metals, noble metals, carbon materials, metal processing etc).
Published since 1926, volume up to 104 pages, circulation up to 1,500 copies. ISSN 0372-2929.


The samples of electronic versions can be found here


Editorial board:
Actual address: Office 624, Leninsky prospekt 6, bld. 1
(Moscow Institute of steel and alloys, bld. A), Moscow, 119049 Russia
Mailing address: P.O. Box No. 71, Moscow, 119049, Russia
Phone / Fax: +7-495-955-01-75, 8 (926) 504-8975
E-mail: tsvetmet@rudmet.ru
Internet: www.rudmet.ru

Subscribing conditions
Advertising conditions
Requirements for advertising materials
Technical Requirements for sending articles

Founders:
National University of Science and Technology "MISIS",
“Ore and Metals” Publishing House

Contributors:

Zapolyarny (Transpolar) affiliate of "Norilsk Nickel" mining and metallurgical company, "Gipronickel" Institute,
Navoi Mining & Metallurgy Combinat,
Tomsk Polytechnical University (National Research University of Resource-effective Technologies),
Moscow Engineering Phisics Institute (National Research Nuclear University),
State Hermitage Museum

Editor-in-Chief – Alexander Putilov
First Deputies-Editor-in-Chief – Anatoly Sysoev, Vladimir Strizhko
Deputy Editor-in-Chief – Alexander Vorobiev, Evgeny Bychkov
Responsible Secretary – Natalia Sharkina

Editorial board:
Abisheva Z. S., D. Eng., Prof., The Center of Sciences about Earth, Metallurgy and Concentration;
Aksenov A. A., D. Eng., Prof., Federal Education Agency;
Alentov P. N., Scientific-Technical Department of the Ministry of Non-ferrous Metallurgy (now retired);
Alekseeva L. I., Scientific-Technical Department of Zapolyarny (Transpolar) Affiliate of "Norilsk Nickel" Mining and Metallurgical Corporation;
Astakhov M. V., D. Ch., Prof., National Research Technological University "Moscow Institute of Steel and Alloys", Chair of Physical Chemistry;
Barbin N. M., D. Eng., Prof., Ural Institute of State Fire Protection Service of the Ministry of Emergency Situations, Chair of Physics;
Beloglazov I. N., D. Eng., Prof., St. Petersburg State Mining Institute, Chair of Automation of Technological Processes and Production Facilities at Metallurgical Department;
Bocharov V. A., D. Eng., Prof., National Research Technological University "Moscow Institute of Steel and Alloys", Chair of Mineral Processing;
Boyarko G. Yu., D. Ec., Prof., Tomsk Polytechnic University - National Research University of Resource-Efficient Technologies, Chair of General and Economical Geology;
Bryukvin V. A., D. Eng., Prof., Institute of Metallurgy and Material Science of the Russian Academy of Sciences;
Bychkov E. M., Independent Expert;
Bykasov A. A., Vice Governor of Volgograd region for business, industry and trade;
Bystrov V. A., D. Eng., Prof., National Research Technological University "Moscow Institute of Steel and Alloys", Chair of Metallurgy of Non-ferrous and Noble Metals;
Dvinin Yu. I., C. Eng., Union of Russian Exporters of Metal Products;
Dmitriev V. A., C. Eng., Krasnoyarsk Works of Non-ferrous Metals;
Elyutin A. V., D. Eng., Prof., "Giredmet" State Scientific-research Institute of Rare and Rare Earth Metals;
Filatov A. V., chairman of board directors of "Poligon Taymir";
Glazunov L. A., D. Eng. Prof., "Gintsvetmet" State Scientific-Research Institute of Non-Ferrous Metallurgy;
Gnedin Yu. F., C. Eng., Moscow Electrode Works;
Kaitmazov N. G., "Gipronickel" State Scientific-Research and Desifning-Engineering Institute of Nickel and its Products;
Kal’chenko V. S., "Aluminium" Non-commercial Partnership (now retired);
Kiselev B. G., C. Ec., Ass. Prof., "SPONK" designing and consulting company;
Klyachko L. I., C. Eng., Kirovgrad Worls of Hard Alloys;
Kolmogorov N. K., C. Eng., "Glavzoloto" gold company (now retired);
Korneev S. I., C. Ec., "Norilsk Nickel" Mining and Metallurgical Corporation;
Kotlyar B. A., C. Ec., "TsNOTORGMET" Consulting-Analytical Center;
Kotlyar Yu. A., C. Eng., "Norilsk Nickel" Russian Joint Company;
Levashov E. A., D. Eng., Prof., National Research Technological University "Moscow Institute of Steel and Alloys", Chair of Powder Metallurgy and Functional Coatings;
Makarov G. S., D. Eng., Prof., Independent Expert;
Mal’tsev N. E., C. Eng., "Soyuztsvetmetavtomatika" Institute of Automation in Non-ferrous Metallurgy;
Matveev V. Yu., C. A., State Hermitage Museum in St. Petersburg;
Miklushevsky V. V., D. Eng., RF Ministry of Education and Science;
Moskvitin V. I., D. Eng., Prof., National Research Technological University "Moscow Institute of Steel and Alloys", Chair of metallurgy of Non-ferrous, Rare and Noble Metals;
Naboichenko S. S., D. Eng., Prof., UGTU-UPI Ural State Technical University;
Nikonov V. I., Dr. Eng., Prof., State Scientific and Research Institute of Chemical Technology;
Pronnikov V. V., "Polygon-Taimyr" Company;
Ptitsyn A. N., D. Eng., "Giprotsvetmet" State Designing-Engineering Institute of Non-ferrous Metallurgy;
Putilov A. V., D. Eng., Prof., Moscow Engineering-Physical Institute - National Research Nuclear University;
Rogal'sky G. L., C. Agr., Ass. Prof., Norilsk Industrial Institute, Chair of Bookkeeping Account and Finances";
Rumyantsev V. K., D. Eng., State Scientific-Research Institute of Hard Alloys (now retired);
Ryzhov A. G., C. Eng., "Norilsk Nickel" Mining and Metallurgical Corporation, Department of Production Management, Sector of Raw Materials and Tolling Operations;
Shchegolev V. I., "SMV Engineering" company
Shatalov R. L., D. Eng., Prof., Moscow State Open University, Chair of Metallurgy, Metal Science and Metal Forming;
Sharkina N. V., "Tsvetnye Metally" journal;
Sharikov Yu. V., Dr. Eng., Prof., St. Petersburg State Mining Institute, Chair of Automation of Technological Processes and Production Facilities at Metallurgical Department;
Shustitsky V. D., C. Eng., Independent Expert;
Strizhko V. S., D. Eng., Prof., National Research Technological University "Moscow Institute of Steel and Alloys";
Strizhko L. S., Prof., National Research Technological University "Moscow Institute of Steel and Alloys";
Sysoev A. V., D. Eng., Prof., Legislative Parliament of Sverdlovsk Region, Committee of Industrial and Agricultural Policy and Natural Resources;
Tarasov A. V., D. Eng., Prof., "Gintsvetmet" State Scientific-Research Institute of Non-Ferrous Metallurgy;
Tsemekhman L. Sh., D. Eng., Prof., "Gipronickel" State Scientific-Research and Desifning-Engineering Institute of Nickel and its Products;
Tsymbulov L. B., D. Eng., Prof., "Gipronickel" State Scientific-Research and Desifning-Engineering Institute of Nickel and its Products;
Vatulin I. I., D. Eng., National Research Technological University "Moscow Institute of Steel and Alloys";
Voldman G. M., D. Ch., Prof., Moscow Institute of Fine Chemical Technology, Chair of Chemistry and Technology of Nano-sized and Composite Materials;
Vorobiev A. G., D. Ec., "Ore and Metals" Publishing House;
Vorobyev-Desyatovsky N. V., Dr. Ch., Prof., "Polymetal Engineering", Department of Hydrometallurgy;

Foreign members of the editorial board:
Prof., Dr. David Dreisinger, B.A.Sc., Ph.D., P.Eng. Head of Industrial Reserch Chair in Hydrometallurgy, Department of Materials Engineering, Faculty of Applied Science, University of British Columbia in Vancouver, Canada;
Prof. Evgeny Jak, "Pyrosearch" Metallurgical Center, University of Queensland (Brisbane, Australia);
Dr. Kari Knuutila, Senior Vice president and Chief Technological Officer, Outotec Oyj, Finland;
Prof., Dr-Ing. Bernd Friedrich, Director of IME Process Metallurgy and Metal Recycling, Department and Chair of RWTH Aachen, Germany;
Prof., Dr. Zh. Baatarkhuu, Deputy Chief of Production and Technical Department, Chief Preparator of Erdenet (Mongolia)


Topic themes:
- Economics and management of production;
- Beneficiation;
- Heavy non-ferrous metals;
- Noble metals and alloys;
- Aluminium, alumina, carbon materials;
- Magnesium, titanium, rare metals, semiconductors;
- Composites and multipurpose coatings;
- Radioactive elements;
- Nanostructured metals and materials;
- Metal processing;
- Automation;
- Chronicle.


Based on resolution of the Supreme Attestation Committee (VAK) pf the Ministry of Education of the Russian Federation, the journal is included in the “List of periodical and scientific-technical editions published in the Russian Federation, where publication of the main results of Doctor’s theses are rec-ommended” for the theme of deposit development of solid mineral resources and for the themes of metallurgy, economics and chemistry.

 
"Gornyi Zhurnal (Mining journal)" (#8) journal is published
"News of the Global Nuclear Market" (#8) journal is published
"Obogashchenie rud (Mineral processing)" (#4) journal is published
"Materialy elektronnoi tekhniki (Materials of electronic technics)" (#2) journal is published
"Non-ferrous Metals" (#1) journal is published
"Chernye Metally (Ferrous Metals)" (#7) journal is published
"Gornyi Zhurnal (Mining journal)" (#7) journal is published

Mechanical arts and the Academy of Arts
Atlas of mineral raw materials, technological industrial products and production of Zapolyarny (Transpolar) affiliate of "Norilsk Nickel" mining and metallurgical company
A novel about metallurgy

main page, news, products, price list, about, contacts
© 2010, "Ore and Metals" Publishing House