Journals →  Tsvetnye Metally →  2020 →  #8

Tsvetnye Metally



HEAVY NON-FERROUS METALS
ArticleName Understanding the process of smelting copper-rich high-silicon concentrates in combination with copper-rich high-sulphur concentrates
ArticleAuthors Kozhakhmetov S. M., Kvyatkovskiy S. A., Semenova A. S., Baysanov A. S.
ArticleAuthorsData

Satbayev University, Institute of Metallurgy and Ore Beneficiation, Almaty, Republic of Kazakhstan:

S. M. Kozhakhmetov, Principal Researcher, e-mail: entc-sultan@mail.ru
S. A. Kvyatkovskiy, Head of the Laboratory
A. S. Semenova, Lead Engineer

 

Zh. Abishev Chemical-Metallurgical Institute, Karaganda, Republic of Kazakhstan:
A. S. Baysanov, Head of the Laboratory

ArticleName Nitric acid leaching of the copper-bearing arsenic sulphide concentrate of Akzhal
ArticleAuthors Rogozhnikov D. A., Zakharian S. V., Dizer O. A., Karimov K. A.
ArticleAuthorsData

Ural Federal University named after the First President of Russia B. N. Yeltsin, Yekaterinburg, Russia:

D. A. Rogozhnikov, Senior Researcher, Department of Non-Ferrous Metallurgy, Candidate of Technical Sciences, Assistant Professor, e-mail: darogozhnikov@yandex.ru
O. A. Dizer, Postgraduate Student, Junior Researcher, Department of Non-Ferrous Metallurgy
K. A. Karimov, Research Fellow, Department of Non-Ferrous Metallurgy, Candidate of Technical Sciences

 

KazGidroMed, Karaganda, Republic of Kazakhstan:

S. V. Zakharian, Head of the Laboratory, Candidate of Technical Sciences

ArticleName Developing a technique for processing fine copper smelter dusts
ArticleAuthors Marchenko N. V., Kovtun O. N.
ArticleAuthorsData

Siberian Federal University, Krasnoyarsk, Russia:

N. V. Marchenko, Associate Professor, Department of General Metallurgy1, Candidate of Technical Sciences, e-mail: natashmarchenk@mail.ru
O. N. Kovtun, Associate Professor, Department of General Metallurgy1, Candidate of Technical Sciences

ArticleName Сomplex processing of lead-containing industrial products by vacuum distillation
ArticleAuthors Naboychenko S. S., Korolev A. A., Maltsev G. I., Timofeev K. L.
ArticleAuthorsData

Ural Federal University named after the first President of Russia B. N. Yeltsin, Yekaterinburg, Russia:

S. S. Naboychenko, Professor-Consultant, Department of Metallurgy of Non-Ferrous Metals, Institute of New Materials and Technologies, Doctor of Technical Sciences
A. A. Korolev, Сhief Engineer

 

JSC “Uralelectromed”, Verkhnyaya Pyshma, Russia:

G. I. Maltsev, Chief Specialist of the Research Centre, Doctor of Technical Sciences, e-mail: mgi@elem.ru
K. L. Timofeev, Head of the Research Centre, Candidate of Technical Sciences, e-mail: K.Timofeev@elem.ru

SCIENTIFIC AND TECHNICAL DEVELOPMENTS OF THE KOLA MMC JSC
ArticleName Analyzing the status of northern taiga forests amid reduced Severonikel emissions
ArticleAuthors Sukhareva T. A., Ershov V. V., Isaeva L. G., Shkondin M. A.
ArticleAuthorsData

Institute of the Industrial Ecology Problems of the North, Federal Research Centre, Kola Research Centre, Russian Academy of Sciences, Apatity, Russia:

T. A. Sukhareva, Senior Researcher, Candidate of Biological Sciences, e-mail: sukhareva@inep.ksc.ru
V. V. Ershov, Junior Researcher, e-mail: Slavo91@gmail.com
L. G. Isaeva, Head of the Laboratory, Lead Researcher, Candidate of Agriculture Sciences, e-mail: isaeva@inep.ksc.ru

 

Kola MMC JSC, Monchegorsk, Russia:
M. A. Shkondin, Сhief Ecologist, e-mail: ShkondinMA@kolagmk.ru

LIGHT METALS AND CARBON MATERIALS
ArticleName Production of rich aluminum master alloys containing scandium, yttrium and zirconium for non-ferrous and ferrous metallurgy
ArticleAuthors Yatsenko S. P., Skachkov V. М., Pasechnik L. А.
ArticleAuthorsData

Institute of Solid State Chemistry of the Ural Branch of the Russian Academy of Sciences, Yekaterinburg, Russia:

S. P. Yatsenko, Principal Researcher, Professor, Doctor of Chemical Sciences, e-mail: yatsenko@ihim.uran.ru
V. М. Skachkov, Senior Researcher, Candidate of Chemical Sciences
L. А. Pasechnik, Leading Scientific Researcher, Candidate of Chemical Sciences

ArticleName Dynamics of formation and properties of cryolite-alumina crusts
ArticleAuthors Isaeva L. A., Mikhalev Yu. G., Zharinova N. Yu.
ArticleAuthorsData

Siberian Federal University, Krasnoyarsk, Russia:

L. A. Isaeva, Associate Professor at the Department of Non-Ferrous Metallurgy, Candidate of Chemical Sciences
Yu. G. Mikhalev, Professor at the Department of Physical and Inorganic Chemistry, Doctor of Chemical Sciences, e-mail: y.mihalev@bk.ru
N. Yu. Zharinova, Associate Professor at the Geography Department1, Candidate of Biological Sciences

COMPOSITES AND MULTIPURPOSE COATINGS
ArticleName Study of polycrystalline diamonds produced by infiltration method using natural and synthetic diamond powders
ArticleAuthors Shorstov S. Yu., Sorokin M. N., Razmakhov M. G., Marakhovskiy P. S.
ArticleAuthorsData

All-Russian Scientific Research Institute of Aviation Materials, Moscow, Russia:

S. Yu. Shorstov, 1st Category Technician at the Laboratory of Heat-Transfer Properties, Sshorstov7@gmail.com
M. G. Razmakhov, Engineer at the Laboratory of Heat-Transfer Properties
P. S. Marakhovskiy, Head of the Laboratory of Heat-Transfer Properties, Candidate of Technical Sciences

 

National University of Science and Technology MISiS, Moscow, Russia:

M. N. Sorokin, Lead Engineer at the Laboratory of Ultra-Hard Materials, sorokin@misis.ru

MATERIALS SCIENCE
ArticleName Understanding the effect produced by combined processing and drawing on the structure and properties of conductive semi-finished products made of Al – Zr alloys
ArticleAuthors Bespalov V. M., Sidelnikov S. B., Belokopytov V. I., Voroshilov D. S.
ArticleAuthorsData

Siberian Federal University, Krasnoyarsk, Russia:

V. M. Bespalov, Associate Professor at the Department of Engineering bachelor CDIO, Сandidate of Technical Sciences, Associate Professor, e-mail: vmbespalov@mail.ru
S. B. Sidelnikov, Professor at the Department of Metal Forming, Doctor of Technical Sciences, Professor, e-mail: sbs270359@yandex.ru
V. I. Belokopytov, Associate Professor at the Department of Metal Forming, Сandidate of Technical Sciences, Associate Professor
D. S. Voroshilov, Head of the Department of Metal Forming, Сandidate of Technical Sciences, Associate Professor, e-mail: sibdrug@mail.ru

ArticleName The structure of AlFe5 master alloys produced from recyclable scrap steel and its effect on the properties of aluminium alloys
ArticleAuthors Nikitin K. V., Nikitin V. I., Deev V. B., Timoshkin I. Yu.
ArticleAuthorsData

Samara State Technical University, Samara, Russia:

K. V. Nikitin, Dean of the Faculty of Mechanical Engineering, Metallurgy and Transport, Doctor of Technical Sciences, Professor, e-mail: kvn-6411@mail.ru
V. I. Nikitin, Head of the Department of Casting and High-Efficiency Technology, Doctor of Technical Sciences, Professor, e-mail: tlp@samgtu.ru
I. Yu. Timoshkin, Department of Casting and High-Efficiency Technology, Сandidate of Technical Sciences, Associate Professor, e-mail: ivan-mns@mail.ru

 

Wuhan Textile University, Wuhan, China1 ; National University of Science and Technology MISiS, Moscow, Russia2:
V. B. Deev, Professor at the Faculty of Mechanical Engineering and Automation at the Wuhan Textile University, Lead Expert at the Department of Metal Forming1,2, Doctor of Technical Sciences, Professor, e-mail: deev.vb@mail.ru

METAL PROCESSING
ArticleName Reactive phase formation during electrospark treatment of the EP741NP alloy with fusible Al – Si electrode
ArticleAuthors Mukanov S. K., Kudryashov A. E., Naumova E. A., Petrzhik M. I.
ArticleAuthorsData

National University of Science and Technology MISiS, Moscow, Russia:

S. K. Mukanov, Postgraduate Student, Engineer at Scientific-Education Center for Self-Propagating High-Temperature Synthesis (SHS) MISiS – ISMAN
A. E. Kudryashov, Lead Researcher at the for Self-Propagating High-Temperature Synthesis (SHS) MISiS – ISMAN, Сandidate of Technical Sciences
E. A. Naumova, Associate Professor at the Department of Metal Forming, Сandidate of Technical Sciences
M. I. Petrzhik, Professor at the Department of Powder Metallurgy and Functional Coatings, Lead Researcher at the for Self-Propagating High-Temperature Synthesis (SHS) MISiS – ISMAN, Doctor of Technical Sciences, e-mail: petrzhik@shs.misis.ru

Journals →  Tsvetnye Metally →  2020 →  #8