Journals →  Tsvetnye Metally →  2013 →  #3

Tsvetnye Metally


The articles, published in the 3-rd issue of "Tsvetnye Metally" (Non-ferrous metals) journal (March, 2013) share the subject area of heavy and light non-ferrous metals and rare metals. This issue shares the questions of theory and practice of ore concentration, production and processing of non-ferrous metals, complex usage of crude ores, economics and management of production and industrial automation.


The section «Economics and Management of Production» includes the article, which describes the production technology of FeNi3/C nanocomposite (permalloy), which application scope is being constantly expanded. This production technology was developed in National University of Science and Technology «MISiS». There were carried out the feasibility study and definition of market value of permalloy production technology. The permalloy production project is included into the Program of innovation development of «Prioksky Plant of Non-ferrous Metals» JSC for the period till 2020.


The article by A. M. Panshin, M. G. Viduetskiy, V. A. Maltsev, V. M. Sokolov and A. A. Bondarev tells about the development of design of high-productive pneumatic columnar flotation machines CFM (КФМ), which foresees the usage of two aeration zones. During the concentration of difficult pyrrhotite containing copper-zinc ores, the pneumatic machine CFM-1400M (КФМ-1400М) worked as high-efficient flotation apparatus.


Composition of non-metallic impurities in black copper, during its air oxidation, was estimated at «Uralelektromed» JSC. Readers can get more information about this estimation in the article «Oxide inclusions in copper during its fire refining process».


The article by V. A. Utkov and M. G. Yakovlev, published in the section «ALUMINIUM, ALUMINA, CARBON MATERIALS», tells about the industrial experience of preparation and agglomeration of red bauxite mud. Sufficiently high-qualitative agglomerate was obtained during the processing of red mud (with humidity of up to 35-45%) from the closed part of slime storage. This agglomerate guarantees the complete direct or complex processing of red mud with extraction of rare-earth metals.


Results of calcium manufacturing mastering of method of granulation of metallic calcium from melt are given in the article by A. A. Talanov, E. V. Ilenko, R. T. Abashev, M. L. Kotsar and V. N. Kaplenkov.


Article by D. V. Pruttskov and N. P. Krivoruchko presents the results of laboratory and experimental and industrial testings for the development of utilization technology of fine dispersed silicon wastes, which were formed during the direct synthesis of organochlorosilanes – developed contact mass. According to results of researches, there were defined the optimal technological decisions for usage of silicon wastes in manufacturing of high silica ferrosilicon and silicon tetrachloride.


Large Afrikanda deposit of perovskite ores (Murmansk Oblast) is the prospective source of titanium compounds and, at the same time, compounds of rare-earth metals, niobium and tantalum. The deposit is of practical interest for development, because of its closeness, preparedness to exploitation and presence of developed infrastructure. As applied to such raw materials, specialists from I. V. Tananaev Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials (Kola Scientific Center of Russian Academy of Sciences) formed a package of large-scale technological developments and small projects. Scientific basis of technology and technological schemes of perovskite concentrate processing were also developed in this institute. In the first place, these basis are directed to manufacturing of pigmental titanium dioxide, which is, practically, lacking in Russia. According to this, there will be simultaneously manufactured the compounds of rare-earth metals. Readers can get more information about this in the article «By-product manufacturing of rare-earth metals during the processing of perovskite concentrate of the Afrikanda deposit».


The article by L. B. Khokhlatova, N. I. Kolobnev, E. A. Lukina and L. B. Ber considers the possibility of obtaining of completely recrystallized structure for the purpose of decreasing of anisotropy of properties in the sheets, made of aluminium-lithium alloy 1424. Uniform and completely recrystallized fine grain structure in the sheets is reached due to the rolling process with intermediate annealings and high-temperature processing on solid solution. Completely recrystallized structure in sheets provides the significant decreasing of anisotropy of properties with straining in three directions.


This issue includes the article, which tells about the activities of Innovation and Technological Center «Akademicheskiy» (Ekaterinburg). Production activity in the Center is constantly combined with scientific and experimental-design works. More than 30 patents and favourable decisions have been received for the 15-year period. More than 20 types of new products have been introduced to the market.


You may find below more details about the issue or book printed or electronic version of the journal.

ArticleName International review of market of non-ferrous metals
ArticleAuthor Korneev S. I.

Korneev S. I., e-mail:

ArticleName The feasibility study and determination of the commercial cost for the technology of manufacturing of metal-carbon nanocomposite FeNi3/C
ArticleAuthors Kiselev B. G., Kostikova A. V., Popkova A. V., Kozlov V. V., Sadykova A. R.

“SPONK” JSC, Moscow, Russia

B. G. Kiselev, Chief Executive Officer, e-mail:


National University of Science and Technology “MISiS”, Moscow, Russia

A. V. Kostikova, Post-graduate Student
A. V. Popkova, Post-graduate Student

A. R. Sadykova, Student


A. V. Topchiev Institute of Petrochemical Synthesis (Russian Academy of Sciences), Moscow, Russia

V. V. Kozlov, Assistant Professor

ArticleName Theory of creation of innovation flotation technologies. Part II. Physical and chemical modeling theory of the selective flotation processes of non-ferrous metals’ ores
ArticleAuthor Abramov A. A.

Moscow State Mining University, Moscow, Russia

A. A. Abramov, Professor, e-mail:

ArticleName Efficiency of application of pneumatic columnar flotation machines, in the time of concentration of refractory copper-zinc raw materials. Part 1
ArticleAuthors Panshin A. M., Viduetskiy M. G., Maltsev V. A., Sokolov V. M., Bondarev A. A.

“Ural Mining and Metallurgical Company Holding” LLC, Verkhnyaya Pyshma, Russia

A. M. Panshin, Technical Officer


Institute of Material Sciences and Metallurgy (Ural Federal University named after the first Russian President B. N. Yeltsin), Ekaterinburg, Russia
M. G. Viduetskiy, Counselor of Director, Head of Education and Scientific Information Center, e-mail:
V. A. Maltsev, Director

“Svyatogor” JSC, Krasnouralsk, Russia
V. M. Sokolov, Chief Executive Officer
A. A. Bondarev, Chief Dresse

ArticleName Processing of slag dumps, using the electrochemical treatment
ArticleAuthors Naguman P. N., Tokaeva Z. M., Nagumanova S. B., Bekova D. Kh.

Karaganda State Technical University (Ministry of Science and Education of the Republic of Kazakhstan), Karaganda, Republic of Kazakhstan:

P. N. Naguman, Assistant Professor, e-mail:


Subsidiary of the National Center on Complex Processing of Mineral Raw Materials of the Republic of Kazakhstan “Zh. Abishev Chemical and Metallurgical Institute”, Kara ganda, Republic of Kazakhstan

Z. M. Tokaeva, Head of Laboratory
S. B. Nagumanova, Engineer
D. Kh. Bekova, Engineer

ArticleName Research of the briquettability of stored sandstone spillage from Kayerkan surface coal mine. Part 1
ArticleAuthors Ozerov S. S., Portov A. B., Blekhshteyn B. L., Tsemekhman L. Sh., Fomichev V. B.

“Gipronikel Institute” LLC, Saint Petersburg, Russia
S. S. Ozerov, Engineer, e-mail:
A. B. Portov, Researcher
B. L. Blekhshteyn, Leading Engineer
L. Sh. Tsemekhman, Head of the Laboratory of Pyrometallurgy

Polar Division of MMC “Norilsk Nickel”, Norilsk, Russia

V. B. Fomichev, Chief Specialist of the Scientific and Engineering Department

ArticleName Problems of arsenic-containing dumps of non-ferrous metallurgy
ArticleAuthor Kopylov N. I.

Institute of Solid State Chemistry and Mechanochemistry (Siberian Branch of Russian Academy of Sciences), Novosibirsk, Russia

N. I. Kopylov, Leading Researcher, e-mail:

ArticleName Oxide inclusions in copper during its fire refining process
ArticleAuthors Selivanov E. N., Popov A. I., Selmenskikh N. I., Lebed A. B.

Institute of Metallurgy of Ural Department of Russian Academy of Sciences, Yekaterinburg, Russia

E. N. Selivanov, Director

N. I. Selmenskikh, Researcher, e-mail:


“Uralelektromed” JSC, Verkhnyaya Pyshma, Russia

A. I. Popov, Head of the Laboratory of Research Center
A. B. Lebed, Head of the Research Center

ArticleName Industrial experience of the preparation and agglomeration of red bauxite mud
ArticleAuthors Utkov V. A., Yakovlev M. G.

National Mineral Resources University, Saint Petersburg, Russia:

V. A. Utkov, Professor
M. G. Yakovlev, Post-graduate Student, e-mail:

ArticleName Mastering of the granulation method of metal calcium and its alloys
ArticleAuthors Talanov A. A., Kotsar M. L., Kaplenkov V. N., Ilenko E. V., Abashev R. T.

JSC “Chepetsky Mechanical Plant”, Glazov, Udmurt Republic, Russia

A. A. Talanov, Leading Engineer of the Central Scientific and Research Laboratory, е-mail:

E. V. Ilenko, Head of the Central Scientific and Research Laboratory
R. T. Abashev, Master of the Calcium Production

JSC “Leading Scientific-Research Institute of Chemical Technology”, Moscow, Russia

M. L. Kotsar, Head of Laboratory
V. N. Kaplenkov, Leading Researcher

ArticleName Processing enterprise of silicon-containing wastes of ogranochlorosilane production
ArticleAuthors Pruttskov D. V., Krivoruchko N. P.

State Enterprise “State Titanium Research and Design Institute”, Zaporozhe, Ukraine

D. V. Pruttskov, Leading Researcher, phone: (+38061) 218-41-66
N. P. Krivoruchko, Head of the Electrochemical Productions Laboratory

ArticleName Investigation of optical characteristics of the silver halide solid solutions’ crystals
ArticleAuthors Lisitskiy I. S., Golovanov V. F., Polyakova G. V., Kuznetsov M. S., Zaramenskikh K. S.

Federal State Research and Design Institute of Rare Metal Industry “Giredmet”, Moscow, Russia

I. S. Lisitskiy, Head of the Laboratory of High-purity Halide Optic Materials, e-mail:
V. F. Golovanov, Senior Researcher
G. V. Polyakova, Senior Researcher
M. S. Kuznetsov, Senior Researcher
K. S. Zaramenskikh, Senior Researcher

ArticleName Рrognostication efficiency of the preliminary mechanical activation of scheelite concentrate by x-ray analysis
ArticleAuthors Bogatyreva E. V., Ermilov A. G.

Chair of Non-ferrous Metals and Gold, National University of Science and Technology “MISiS”, Moscow, Russia

E. V. Bogatyreva, Assistant Professor, e-mail:
A. G. Ermilov, Former Collaborator of a Chair

ArticleName By-product manufacturing of rare-earth metals during the processing of perovskite concentrate of the Afrikanda deposit
ArticleAuthors Nikolaev A. I., Kalinnikov V. T.

1I. V. Tananaev Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials (Kola Scientific Center of Russian Academy of Sciences), Apatity, Russia
2Murmansk State Technical University, Murmansk, Russia
3Kola Scientific Center of Russian Academy of Sciences, Apatity, Russia

A. I. Nikolaev, Deputy Director1, Professor2, Head of Department3, e-mail:
V. T. Kalinnikov, Director1, Professor, Head of a Chair2, Chairman3

ArticleName Physical and chemical foundations of the crystallization separation of sodium and zirconium chlorides in eudyalite hydrochloric acid technology
ArticleAuthors Bezymyanova Yu. A., Skiba G. S.

Murmansk State Technical University, Murmansk, Russia

Yu. A. Bezymyanova, Senior Lecturer of the Chemistry Chair

I. V. Tananaev Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials (Kola Scientific Center of Russian Academy of Sciences), Apatity, Russia

G. S. Skiba, Head of the Laboratory of Chemical and Optical Methods of Analysis, e-mail:

ArticleName Increasing the quality, economic and environmental levels of manufacturing of lead-antimony shot
ArticleAuthors Vasilevskiy P. A., Moskalev S. A., Zheleznyak L. M., Motyreva T. A.

“Kamkor” LLC, Kamensk-Uralskiy, Russia

P. A. Vasilevskiy, Executive Officer


“Metall-komplekt” JSC, Kamensk-Uralskiy, Russia

S. A. Moskalev, Head of the Raw Materials Department

Ural Federal University named after the first Russian President B. N. Yeltsin, Ekaterinburg, Russia

L. M. Zheleznyak, Assistant Professor, e-mail:
T. A. Motyreva, Student

ArticleName Reduction of anisothropy in the sheets, made of the Al – Mg – Li – Zn-alloy 1424
ArticleAuthors Khokhlatova L. B., Kolobnev N. I., Lukina E. A., Ber L. B.

All-Russian Scientific Research Institute of Aviation Materials, Moscow, Russia

L. B. Khokhlatova, Head of a Sector, e-mail:
N. I. Kolobnev, Chief Researcher
E. A. Lukina, Senior Researcher


“All-Russian Institute of Light Alloys” JSC, Moscow, Russia

L. B. Ber, Chief Researcher

ArticleName Detection of elaborate design defects on the basis of the complexation of information of multivariate non-destructive check
ArticleAuthor Bekarevich A. A.

National University of Science and Technology “MISiS”, Moscow, Russia

A. A. Bekarevich, Assistant Professor, Head of a Chair “Computer information and management automatic systems”, e-mail:

Journals →  Tsvetnye Metally →  2013 →  #3