Journals →  Chernye Metally →  2019 →  #4

Chernye Metally


 

The fourth issue of the "Chernye Metally" journal is opened by the publication of the "Preparation of Raw Materials" section on the nature of iron minerals distribution in sulfide, copper and polymetallic ores.

In the “Continuous casting and foundry production” section, an article of foreign experts describes automation of the casting process in the oxygen converter shop of the Tata Steel company in IJmuiden. The authors from the Volgograd University presented the research results of structural features of the cast structure of continuously cast billets from steels of preperitectic and peritectic classes with different content of alloying elements. Representatives of the Nizhny Novgorod State University published the results of the use of carbonate and ammonium carbonate additives to ensure the required properties of casting molds.

The publications of the “Pipe production” section are devoted to determine the effect of settings of a screw piercing mill tool on the nature of billet forming in a deformation zone; methods for contactless measurement of the outer diameter of a pipe along its entire length; the process of obtaining steel tubular products of variable cross-section along the length, based on the technology of longitudinal rolling in rolls with grooves of a variable profile, forming an eccentric pass.

In the “Rolling and other metal forming processes” section, the publication that discusses the theoretical foundations of the issue of deviation from the straightness of a steel cord in industrial production on double-twisting cable machines attracts attention.

The article of the "Heating and heat treatment" section is devoted to calculation and development of the pilot installation for symmetric induction hardening of metal balls used in the mining industry.

 

The authors of the "Coating and corrosion of surfaces" section proposed a method for treating metal surfaces and applying functional coatings with a flexible tool — rotating wire brushes. The study of the authors from the Chuvash State University of the 08kp steel corrosion process used for the manufacture of VAZ car bodies in environment simulating the road conditions of car operation, using the example of the Moscow-Ufa highway M7, is of interest.

 

In the section “Additive Technologies”, the article is devoted to a comparison of structures and mechanical characteristics of samples from a spheroidized powder of a heat-resistant iron-based alloy obtained from two different additive technologies routes: selective laser melting and gas-powder laser surfacing.

 

Please find more details below, or order your printed or electronic version of the Journal.


Preparation of raw materials
ArticleName On the nature of the iron minerals distribution in sulfide, copper and polymetallic ores
ArticleAuthors A. A. Frangulyan, M. E. Sasuntsyan, V. A. Martirosyan
ArticleAuthorsData

National Polytechnic University of Armenia (Erevan, Armenia):

A. A. Frangulyan, Cand. Eng., Department of General Chemistry and Chemical Processes, e-mail: albertaranea@mail.ru
M. E. Sasuntsyan, Cand. Eng., Associate Prof., Department of General Chemistry and Chemical Processes, e-mail: msasuntsyan@mail.ru
V. A. Martirosyan, Dr. Eng., Prof., Department of General Chemistry and Chemical Processes, e-mail: v.a.martirosyan@mail.ru

Continuous casting and foundry production
ArticleName Automated control of the steel casting process at the Tata Steel Company in Ijmuiden
ArticleAuthors B. Schaap, P. Coster, S. Brockhus, H. Pronk
ArticleAuthorsData

Tata Steel Europe (Ijmuiden, Netherlands):

B. Schaap, Process control engineer BOS
P. Caster, Eng., Process control engineer BOS
S. Brockhus, Eng., IT manager BOS
H. Pronk, Operational expert BOS, e-mail: hans.pronk@tatasteel.com

ArticleName The influence of steel chemical composition on structural features of a continuously cast billet with a diameter of 410 mm
ArticleAuthors M. Yu. Chubukov, D. V. Rutsky, N. А. Zyuban, M. V. Kirilichev
ArticleAuthorsData

Volgograd State Technical University (Volgograd, Russia):

M. Yu. Chubukov, Post-graduate
D. V. Rutskiy, Cand. Eng., Associate Prof.
N. A. Zyuban, Dr. Eng., Prof., Head of the Chair “Technology of Materials”, e-mail: tecmat@vstu.ru
M. V. Kirilichev, Post-graduate

ArticleName The use of technological additives of carbonates and ammonium bicarbonates in resource-saving technology of precision steel casting
ArticleAuthors L. I. Leushina, I. O. Leushin, M. A. Larin, S. V. Plokhov
ArticleAuthorsData

Nizhniy Novgorod State Technical University (Nizhniy Novgorod, Russia):

L. I. Leushina, Cand. Eng., Associate Prof., the Chair “Metallurgical technologies and equipment”
I. O. Leushin, Dr. Eng., Prof., Head of the Chair “Metallurgical technologies and equipment”, E-mail: igoleu@yandex.ru; kafmto@mail.ru
M. A. Larin, Cand. Eng., Associate Prof., the Chair “Metallurgical technologies and equipment”
S. V. Plokhov, Dr. Eng., Prof., Chair “Nanotechnologies and biotechnologies”

Tubemaking
ArticleName Determination of geometric relationships of a deformation zone during the helical piercing of billets
ArticleAuthors V. A. Toporov, А. А. Bogatov, D. Sh. Nukhov, О. А. Panasenko
ArticleAuthorsData

Seversky Pipe Plant (Polevskoy, Russia):

V. A. Toporov, Technical director
O. A. Panasenko, Head of the SRC tube-rolling laboratory

 

Ural Federal University (Ekaterinburg, Russia):

A. A. Bogatov, Dr. Eng., Prof., Chief researcher
D. Sh. Nukhov, Cand. Eng., Scientific Researcher, e-mail: d.s.nukhov@urfu.ru

ArticleName Comparative analysis of methods for contactless diameter measuring for precise tubes with extra thin walls
ArticleAuthors I. N. Bazhukov, An. V. Serebryakov, Al. V. Serebryakov, S. I. Parshakov
ArticleAuthorsData

Pervouralsk New Tube (Novotrubny) Works (Pervouralsk, Russia):

I. N. Bazhukov, Leading engineer-researcher, the group of new types of tubes for nuclear power industry, e-mail: ivan.bazhukov@chelpipe.ru
An. V. Serebryakov, Cand. Eng., Head of he group of new types of tubes for nuclear power industry, e-mail: andrey.serebryakov@chelpipe.ru

 

Ural Federal University (Ekaterinburg, Russia):
Al. V. Serebryakov, Cand. Eng., Associate Prof.
S. I. Parshakov, Cand. Eng., Associate Prof.

ArticleName Obtaining steel tubular items of variable cross-section along their length
ArticleAuthors M. V. Kadach, A. N. Koshmin, Yu. V. Gamin, B. A. Romantsev
ArticleAuthorsData

National University of Science and Technology “MISiS” (Moscow, Russia):

M. V. Kadach, Post-graduate, e-mail: stendek89@yandex.ru
A. N. Koshmin, Post-graduate, e-mail: madswom@yandex.ru
Yu. V. Gamin, Cand. Eng., Senior lecturer, e-mail: gamin910@gmail.com
B. A. Romantsev, Dr. Eng., Prof., e-mail: boralr@yandex.ru

Rolling and other metal forming processes
ArticleName Technical solutions for reliable handling of high-strength steel strip rolls
ArticleAuthors Ch. Mengel, U. Cramer, Th. Holzhauer, A. Kastner, A. Muller, W. Fuchs
ArticleAuthorsData

SMS Group GmbH (Hilchenbach, Germany):

Ch. Mengel, Dr.

U. Cramer, Mag. Eng., e-mail: ulrich.cramer@sms-group.com

Th. Holzhauer, Mag. Eng.

A. Kastner, Mag. Eng.

A. Müller, Mag. Eng.

W. Fuchs, Mag. Eng.

ArticleName The effect of steel cord tension on its straightness during winding
ArticleAuthors Yu. L. Bobarikin, Yu. V. Martyanov, A. V. Vedeneev
ArticleAuthorsData

Gomel State Technical University named after P. O. Sukhoy (Gomel, Belarus):

Yu. L. Bobarikin, Cand Eng., Head of the chair “Metallurgy and technology of metal forming”, e-mail: bobarikin@tut.by
Yu. V. Martyanov, Post-graduate

 

Byelorussian Steel Works — Management Company of “Byelorussian Metallurgical Company” Holding (Zhlobin, Belarus):
A. V. Vedeneev, Cand. Eng., Leading engineer-technologist of the laboratory of metalware production

Heating and heat treatment
ArticleName Calculation and development of an experimental induction installation for symmetric hardening of grinding metal balls
ArticleAuthors V. N. Meshcheryakov, O. V. Fedorov, S. S. Titov, D. V. Bezdenezhnykh
ArticleAuthorsData

Lipetsk State Technical University (Lipetsk, Russia):

V. N. Meshcheryakov, Dr. Eng., Prof., Head of the chair of electric drive, e-mail: algebra934@yandex.ru
D. V. Bezdenezhnykh, Cand. Eng., Associate prof., Chair of electric drive

 

Nizhniy Novgorod State Technical University (Nizhniy Novgorod, Russia):

O. V. Fedorov, Dr. Eng., Prof., Chair of innovation management

 

“Systema 48” Scientific and Production Enterprise (Lipetsk, Russia):
S. S. Titov, Cand. Eng., General director

ArticleName Installations for heat treatment of new high-strength automotive steels for the automotive industry
ArticleAuthors P. Seemann, M. Brenninger
ArticleAuthorsData

Ebner Industrieofenbau (Leonding, Austria):

P. Seemann, Mag. Eng., Executive VP product, e-mail: see@ebner.cc
M. Brenninger, Mag. Eng., Expert product development

Coating application and corrosion resistance
ArticleName Surface modification by plastic deformation with coating application
ArticleAuthors L. S. Belevskiy, E. V. Gubarev, Yu. Yu. Efimova
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

L. S. Belevskiy, Dr. Eng., Prof., Chair of Engineering and Operation of Metallurgical Equipment, e-mail: l.belevskiy@mail.ru
E. V. Gubarev, Assistant, Chair of Physics, e-mail: john_g@mail.ru
Yu. Yu. Efimova, Cand. Eng., Associate Prof., Chair of technology of materials processing, e-mail: jefimova78@mail.ru

ArticleName Corrosion of ferrous metals in environments imitated the conditions of vehicles operation
ArticleAuthors I. E. Illarionov, Sh. V. Sadetdinov
ArticleAuthorsData

I. N. Ulyanov Chuvash State University (Cheboksary, Russia):

I. E. Illarionov, Dr. Eng., Prof., Head of the Chair of material science and metallurgical processes, e-mail: tmilp@rambler.ru
Sh. V. Sadetdinov, Dr. Chem., Prof., Chair of material science and metallurgical processes

Additive technologies
ArticleName Investigation of the structure and mechanical characteristics of specimens made by laser cladding and selective laser melting processes of spheroidized iron based powder
ArticleAuthors D. V. Masaylo, A. A. Popovich, A. V. Orlov, E. L. Gyulikhandanov
ArticleAuthorsData

Peter the Great St. Petersburg Polytechnic University (St. Petersburg, Russia):

D. V. Masaylo, Scientific researcher, e-mail: dmasaylo@gmail.com
A. A. Popovich, Dr. Eng., Prof., Director of the Institute of metallurgy, machine-building and transport
A. V. Orlov, Scientific researcher
E. L. Gyulikhandanov, Dr. Eng., Prof.

* * *
ArticleName Iron and Steel News
Journals →  Chernye Metally →  2019 →  #4